Connecting keenetic giga 2. Description of the Zyxel Keenetic Giga II router, its connection, firmware and configuration. Hardware filling of the router

The zyxel keenetic giga 2 router is a real Internet monster that can easily handle both multi-gigabyte downloads and IPTV. This is confirmed by two detachable antennas included in the package (with a gain of 5 dBi), and a 2-port USB host, thanks to which access to high-speed 3G is possible. The built-in electronic filling allows you to achieve download speeds up to 1 Gbps!

The ZyXEL Router is an internet monster that can handle both multi-gigabyte downloads and IPTV with ease.

The router works according to the 802.11n standard and is equipped with a built-in firewall for better protection. It was for this generation that the NDMS V2 platform was developed. In general, the zyxel keenetic ii router is an excellent modern platform for organizing a wireless connection. But how to get the most out of such power? This will be discussed further.

Internet connection setup

First, connect the router to power in the following way:

• the adapter that comes with the kit - into an electrical outlet;
• Internet cable - to the WAN connector;
• patch cord from the delivery - to the connection "LAN-port" and "PC network card".

Now that the device is connected, all settings can be made through the main menu..168.1.1 .

You will be prompted to enter "Username" and "Password". If you bought a zyxel keenetic giga ii router out of the box, then the data will be standard - enter “admin” in both fields. In the upper right corner of the web interface that opens, you can select the language of operation. The default is English. Choose from the bottom row of icons one with the image of a globe - this tab is responsible for setting up an Internet connection. In the window that opens, select the IPoE option and then the ISP interface.

To make your work easier, in the “Configure IP settings” item, select the “Automatic” option, and “MAC address” – “Take from the computer”. Also check the correct selection of WAN and LAN, which are responsible, respectively, for connecting to the network and PC. Click "Apply" to save specific changes.

Setting up a Wi-Fi connection

The real potential of the zyxel keenetic giga 2 router shows when creating a working Wi-Fi network.

Despite the presence of 4 ports for a PC, a wireless connection expands the number of simultaneously connected devices to one and a half dozen.

These steps are required to set up and calibrate the network. The Wi-Fi configuration is handled by an icon that looks like a mobile phone signal, located at the bottom of the menu. The following parameters should be configured according to the algorithm:

1. “Access Point” - “Enable” (everyone within the signal range will be able to see and connect to the created network).
2. SSID - enter any network name you like.
3. "Protection" - experts at the Ziksel Internet Center advise choosing the WPA-PSK protocol.
4. “Security key” is a password for accessing a Wi-Fi network, while it can be up to 63 characters!

All other parameters can be left as default. Save your changes.

Setting up IPTV and Multicast

IPTV is a resource-demanding but growing service that turns the zyxel keenetic giga router and your PC into a single media center. It is worth noting that this service became available with the second generation of the Giga device series.

There are several options for accessing IPTV:

• connecting a TV tuner;
• using special software (for example, VLC).

These options are slightly different from each other. Setting up the zyxel keenetic giga router for IP television is as follows. Open the "Home network" tab (the icon with the image of several computers in the main menu of the router), and in it - IGMP Proxy.

In the window that opens, check the box next to the pointer. Thus, the Internet TV function will be available at any of the options connections. For more details, please contact your provider's technical support.

If the IGMP Proxy option is not available, then to enable it you will need to activate it in the "System" and "Components" tabs. In the following given parameters, you must set the following values:

1. Upstream - ISP (it will provide IPTV traffic).
2. Downstream - LAN / WLAN interface (it houses a PC and a TV tuner).

In the case of setting up through a special set-top box, additionally designate the port to which it is connected and which will provide access to the TV. To do this, you will need to perform two steps. First, by clicking on the “Internet” icon, go to the ISP interface tab to calibrate it. Second - in the same place, mark the specific connector that will be used to connect the IPTV set-top box.

http://website/

After completing the above steps, restart the connected gadget, and the router will be ready to receive and transmit digital television. Now you know how to make the most of all the hardware power of the second generation Zyxel Keenetic Giga!

The Zyxel Keenetic Giga II router is a successful model of a well-known network equipment manufacturer. This is a powerful device with a good set of parameters and functions that will provide a fast and high-quality Internet connection.

Users are already accustomed to the wide functionality of routers

Let's find out what is remarkable about this router model, how to configure it yourself, and, if necessary, change the firmware on the device.

The Zyxel Keenetic Giga II model is average in terms of parameters between Keenetic II and Keenetic Ultra. The first model costs a little less, but has weaker characteristics, so the choice should be made in favor of the Giga II. The other model is stronger, but also more expensive, more likely designed for demanding users.

The filling of the Zyxel Keenetic Giga 2 is 256 MB random access memory, 16 MB of memory for installing firmware, the router has gigabit ports and operates at speeds up to 300 Mbps. Such indicators are optimal for most users - they usually use the Internet at speeds up to 100 Mbps, so the router will do just fine with it.

The model is equipped with 4 LAN ports and one WAN port, USB connectors for connecting various equipment, a power button - it is convenient not to turn off the router from the network every time, reset the settings.

The router is equipped with two external antennas, which positively affects the quality and coverage area of ​​the signal. It is worth noting the stylish look - it attracts attention and looks quite interesting.

It also has a separate WPS button on top to quickly enable or disable Wi-Fi - it's up to you to decide whether it is useful or not, but if so, this is a pretty practical solution. In general, the Zyxel Keenetic Giga II is the best fit for a home or small office - it is powerful enough and not too expensive in price.

Setting up a router

To enter the settings menu, you need to enter the combination 192.168.1.1. in the address bar of the browser, then an authorization window will appear - by default, the values ​​\u200b\u200bof admin are entered in both lines or 1234 in the password line.

Then you can move on to setting up the connection, Wi-Fi, IPTV and other functions.

To configure the network, select the Internet section at the bottom of the window, after which the settings will differ depending on the type of connection.

To set up a DHCP connection with an automatic IP address, follow these instructions:

• Select the Broadband connection (ISP) line in the table;

• You will see a form for filling in the data, where, first of all, you need to mark the connector where the Internet cable is connected;
• Next, check the lines "Enable interface" and "Use to access the Internet";
• In setting the IP parameters from the list, select the option to automatically obtain the address;
• Enter the number 1400 in the MTU line, save the changes.

If the connection is made through a static IP address, then in this form you need to select the appropriate parameter for this setting and enter the address value, subnet mask and gateway in the fields below.

For connections whose setup requires input more information, select the Internet section and open the Authorization tab, where in the window that appears, do the following:

• For a PPTP connection, check the box next to Enable, select this protocol from the list. In the "Connect via" line, select Broadband connection (ISP), below enter all the data from the provider - server address, username and password, check the automatic authentication algorithm;

• To connect PPPOE, select the appropriate protocol in the "Type" line, enter the username and password entered in the contract from the provider. In "Connect via" and in the verification algorithm, select the same options as before;

• Connection through the L2TP protocol occurs in almost the same way. All you need to enter is a description (connection name), user name and password, server address, select an automatic authentication algorithm.

Setting up a Wi-Fi connection

The router is primarily used to access the network via a wireless connection, which is configured as follows:

• Select the Wi-Fi section in the options menu in the bottom line;
• Turn on the access point by marking the corresponding line with a checkbox, enter the network name;
• The SSID hiding line, that is, the network name, was created in order to further secure it from hacking. When activated, the connection will be invisible when searching for points on other devices. To connect to the Internet, you will need to manually enter a name and password, that is, if they are not known, then they will not try to use your Internet;
• In the WPA key line, come up with a key to connect to your network - try to create a more or less complex combination, again so that third parties do not use your Internet;
• Select the automatic channel - in this case, the router will determine which of the available channels is the least loaded, and will connect to it.

It is also worth changing the factory login and password to access the settings menu itself after the first authorization - this is done in the System section.

If, in addition to the Internet, you use IPTV through a router, then installing it on this router is quite simple. Select the Home Network section below and the IGMP Proxy tab. Choose to activate this feature and save your changes.

Software Update

To update or replace the firmware on Ziksel Kinetic Giga, you need to download current version firmware - note that it was designed specifically for this router, after which we use the following instructions:

• Go to the options menu through the browser, select the System section;
• Among the tabs, open the Files submenu, where there is a line for specifying the path to the firmware file;
• After specifying the location of the firmware, click on "Replace" and confirm your intentions, then the installation of new software will begin.

As you can see, the Zyxel Keenetic Giga II is remarkable appearance, a powerful filling, but also easy to set up - any user can create an Internet connection on the router. It is no less easy to change the firmware on the device, so the model does not in vain attract attention among other competitors. It combines simplicity, functionality and affordable price.

1. Wireless antennasWiFi Two omnidirectional antennas. The recommended position of the supplied antennas is vertical.
2. (Wireless Network Management) buttonWiFi) The button allows you to quickly and securely connect 802.11g/n Wi-Fi 802.11g/n wireless devices that support the WPS standard to the router's secure Wi-Fi network, such as computers and laptops with an operating Microsoft system Windows.

Short press Launches the Quick Connect (WPS) feature
Pressing more than 3 seconds Turns the wireless network on or off

1. Reset button (Reset user settings) Use this button if you need to reconfigure the router or if you have lost your router password. To reset the settings, press the button with a pointed object and hold it down for about 10 seconds, until all the indicators on the router turn off. The power indicator will start flashing, and after half a minute the Keenetic will boot up with default settings.

1. FN button (flexible button) In the router's web configurator, you can assign one or more functions to this button. By default, the button is designed to safely disconnect all USB drives connected to the router.

1. Network connectors "0 ... 4" Five network connectors for connecting home devices and the Internet. By default, the yellow connectors "1 ... 4" refer to the home network, and the blue connector "0" to the Internet.

1. Power switch and socket Power switch and connector for connecting the power adapter included in the package. The router is designed for continuous operation and does not require a daily power outage. If you need to turn off the router, such as during an extended period of inactivity, we recommend that you also unplug the power adapter from the electrical outlet.

(USB multifunction host connector) Located on the side of the router.Slot for connecting compatible USB devices such as USB modems mobile Internet 3G/4G, USB drives, USB printers. You can find the current list of compatible USB devices on the Keenetic Omni router page by visiting the ZyXEL website.

8.Power indicator (Status)

9. Indicators 0, 1, 2, 3, 4 (Connecting to network connectors)

10. (Wireless Wi-Fi) indicator

12. Indicator (Connecting to the "USB" connector)

Router connection

• Choose a suitable location for the router. It is recommended to place the router in the center of the wireless network.
• Adjust the position of the antenna. Most often, the vertical position is best.
• Connect the computer to the local network through the LAN (home network) ports of the router (if you already have a wireless network adapter and if you want to use a wireless network connection, you can skip this step)
• Connect the incoming Ethernet cable to the router's INTERNET port
• Connect the power adapter to the appropriate socket on the router, and plug the other end into a power outlet.

Setting up a computer to connect to a router:

• In your computer's TCP/IP protocol settings, select .

To configure the router, you will need a computer with an Ethernet or Wi-Fi network adapter configured to automatically obtain an IP address (in your computer's TCP/IP protocol settings, select Obtain an IP address automatically).
1. Plug the router into the mains using the supplied power adapter. Wait until the router's POWER LED stops blinking and stays lit.
2. Connect the router to the computer from which the configuration will be performed. To do this, connect connector "1" on the router to the computer's Ethernet adapter using the supplied network cable. Turn on the computer and wait for the operating system to load. When properly connected to the computer, the indicator “1” will light up on the router.

To access the router settings, open a web browser and enter the default address http://192.168.1.1 in the address bar, then press ENTER. A window will open with a choice of the type of router settings. In this window, select Web configurator.



Immediately after selecting the configuration option, a window will appear in which you will be prompted to create a password for logging into the router in order to prevent unauthorized access to the system settings.


In both windows, you must enter the same password, in case of a mismatch, a password mismatch message will appear.

After that, you will be taken to the main settings and diagnostics page. This window displays general information about the connection status, as well as settings menu items.

SettingDHCP

To configure automatic receipt of an IP address (DHCP) by the router, you must click on the button

After you need to select the type of connection Broadband connection which is to be configured (double-clicking on it with the left mouse button):

After selecting the connection type, a new window will open in which you can configure the automatic receipt of an IP address.

Use connector: In this section, you can select the port that will be the main one for communication with your provider. When configuring, the default port "0" should be marked. Opposite other ports should be empty cells.

Pass tagsVLAN ID: This field can be left blank.

Turn on:

Description: In this field, you can set the name of the connection, how it will be displayed in the router settings field. You can leave the default name in this field (broadband connection) or change it to DHCP.

Network ID(VLAN ID): Leave the default setting 2

SettingsIP: In this setting item, you can select the type of IP acquisition, it must be selected Automatic.

IPaddress:
Subnet mask: not available (when automatically configuring IP settings)
Main gate: not available (when automatically configuring IP settings)

DNS 1,2,3: These fields should remain empty, because when automatically obtaining an IP address, your router will automatically receive this parameter as well.

MAC-address: In this item, you can select how to use the MAC address (unique identifier of a network device). The value must be Default.

Device name: In this item, you can change the name of your router that will be displayed on the Internet.

The sizeMTU: Should be set to 1500

Do not reduceTTL: In this menu item, the selection should be deselected.

After entering the settings, press Apply. Then you can proceed to setting up a Wi-Fi connection.

Setting up a PPOE connection

If you are using a PPPoE connection, then you should select

then in the window that appears for settings, select the tab PPPOE/VPN and in this window press the button Add connection

After that, a new window will appear in which you need to configure the connection using the PPPOE protocol.

Turn on: This item must be selected (activates this species connections).

Use to access the Internet: This item must be selected. If the selection is deselected, then the router will not use the dedicated port to communicate with the provider, but will use this port as a local port (for communication within the local network).

Description: In this field, you can set the name of the connection, how it will be displayed in the router settings field. It is recommended to specify a PPPOE connection.

Type (protocol): In this item, you must select the type of tunneled PPPOE connection. (PPPTP, L2TP options are also available - not used in your network)

Connect via: In this item, you must select the network connection that will be used to establish the connection. Must choose Broadband connection (ISP)

Service name:
Hub name: This field must be left blank. (not used)
Service address: This field is not available with this type of connection.

Username: Login connection provided by your ISP.
Password: At this point, you must specify Password connection provided by your ISP.

Authentication method: This paragraph should contain the value Auto .

Data encryption:
UseCCP: This punt is not available with this connection.

SettingsIP: This item is responsible for the type of obtaining an IP address. Must be value Auto .

IPaddress: This punt is not available with this connection.
RemoteIPaddress: This punt is not available with this connection.

DNS 1,2,3: These items are responsible for specifying specific DNS servers. But due to the fact that all settings are assigned automatically, there is no need to specify values ​​in these fields.

AutotuningTCP-MSS: This item is responsible for auto-tuning the size of data fragments. This item must be enabled.

After setting up the connection via PPPOE, you need to click the APPLY button, after which you can proceed to the Wi-Fi network settings.

Setting up a wireless connection

To set up a wireless connection, you need to press the icon in the main menu.

In the window that appears, the tab should be selected. Access point.



Enable hotspot: This item is designed to enable/disable the broadcasting of the radio module. This item must be included.

Network name(SSID): In this field, you must enter the name of your network (your network name will be displayed in the list of available networks). By default, this field contains the name of the router model.

HideSSID: If this item is not selected, then the name of your network will be visible in the list of networks, if the item is selected (activated), then your network will be hidden, and connection to it will be possible only by manually entering the network name. This item is best left unselected.

Network protection: Here you can select the type of encryption to be used. It is advisable to use WPA2-PSK since this type of encryption is the most reliable and supports the 802.11n broadcast standard (the fastest).

Network key: Here you can specify a password from 8 to 63 characters in ASCII encoding (that is, it is permissible to use letters and numbers of the Latin alphabet, uppercase and lowercase).

Key 1,2,3,4:

Default key: At this type encryption (WPA2-PSK) not available

Standard: Select mode 11bgn. This mode allows all 802.11b, 802.11g and 802.11n wireless stations to connect to the router.

Channel: This field sets the operating frequency that you are going to use. The default mode is auto, thus, the access point will automatically select the most suitable channel automatically . This setting should be left in Auto.

Signal strength: In this item, you can set the broadcast signal strength of the radio transmitter. It is necessary to put 100%.

Turn onWMM: This item is needed for the best distribution of priorities in the compilation of packets (QOS). This item must be included.

After setting the settings, click the APPLY button. After that, your router is fully configured to work on our network.

Average router ZyXEL Keenetic Giga II provides the user with many opportunities for networking. The device can be used as a Wi-Fi signal booster or 3G/4G router (when connecting a USB modem), and for wired data transmission using 4 LAN ports. With 256 MB of RAM and another 16 MB for firmware, the router downloads data at speeds up to 1 Gb / s and transfers the same amount of information using a wired network and up to 300 Mbps wirelessly. The list of software installed by default includes a torrent client.

Setting up a router

Before you start setting up the ZyXEL Keenetic Giga, you should turn it on and connect it to the provider's cable and to a computer (or laptop) equipped with a network card. For this, a patch cord is used, which is connected to the first LAN port of the device and to the corresponding PC connector. The first stage, according to the instruction attached to the ZyXEL Keenetic Giga II, involves the use of any browser, in the address bar of which you should enter "192.168.1.1". To get started, you need to specify the login (“admin”) and the default password (the same as the name).

The next step is to go to the device's router and configure the VLAN. To do this, Keenetic Giga requires pressing the "Internet" button located at the bottom and going to the IPoE, PPPoE or L2TP tab.

Further user actions depend on the type of connection:

• for IPoE, just select the ISP interface, set automatic configuration
• settings and enter the MAC address of the computer;
• L2TP connection requires connection name, name and password;
• for PPPoE, you will only have to enter a name with a password.

If you need to configure additional features, you need to perform a few more steps. This will allow the router to work properly with file hosting and VPN servers. And also start the wireless network.

Additional settings

If the ZyXEL Keenetic Giga does not allow devices connected to it to use the µTorrent torrent client, you must enable UPnP protocol support to change the settings. To enable port forwarding, follow these steps:

1. Go to the web configurator of the device;
2. Go to the "System" menu on the components tab;
3. Install UPnP service;
4. Launch the µTorrent application, open settings and configuration;
5. Go to the connection menu by checking the UPnP forwarding checkbox.

To set up a VPN server from a remote client, go to the Network and Sharing Center. Here you set up a new connection in the Workplace Connection menu and select the first item from the list (Use VPN). The VPN connection settings specify an IP address depending on the type of access: local for logging in from the local network or external for a remote connection.

Turn on Wi-Fi

To start the wireless network of the ZyXEL Keenetic Giga 2 router, you need to use the same settings menu with which it was connected to the Internet. This selects the Wi-Fi tab. And in the "Access Point" tab, check the box next to the "Enable" item.

After that, the user is required to:

1. Enter the name of the network (in Latin and numbers);
2. Set the WPA-PSK security option and enter a password of 8-63 characters;
3. Click on "Apply".

To use the device as a wireless network amplifier, a special configuration of the ZyXEL Keenetic Giga router in repeater mode must be carried out. You can do it by opening the settings, selecting the Internet tab and enabling the Wi-Fi client. By selecting the appropriate connection from the list that appears after clicking on the "Browse Networks" button, you can connect the router as an amplifier. This will expand the range of the wireless connection. Although, before starting the action in amplifier mode, you will have to reboot both routers - custom and main. Then the WPS activation button is pressed on the devices. After that, Keenetic Giga becomes an amplifier.

Reset

Another option provided by the Keenetic menu is to reset to factory settings. It is used when you lose your password or need to reconfigure the device. And such a reset is performed as follows:

1. The router configuration is saved before reset;
2. The device is turning off;
3. The reset button on the device is pressed with a thin object until the power indicator starts flashing rapidly (usually no more than 10 seconds).

This resets the router to factory settings. If it does not help, and the router does not respond even to a 30-second press, you will have to replace software. This requires a flashing of the device, after which a reset is no longer required.

Flashing the device

Installing new software is required when the router malfunctions - when the ports do not work, the connection to the network or Wi-Fi does not work. The ZyXEL Keenetic Giga firmware will not take much time. For this it is enough:

1. Select the system section and firmware tab;
2. Get familiar with already installed version firmware;
3. Go to the website of the official router manufacturer and find new software. It is not recommended to use alternative firmware versions from other resources;
4. Download new software to your hard drive;
5. Unpack the firmware version and install it on the router through the menu (using the "Overview" tab).

After completing the flashing and rebooting the system, you will have to run it again ZyXEL setup Keenetic Giga II by creating an Internet connection and a wireless network. Along with this, you will have to perform all other changes to the router parameters. And as a result, we get a fully functional and easy-to-use device, the capabilities of which are more than enough for both home and office.

The Zyxel Keenetic Giga II Internet Center is a higher level product than its predecessors.

The router is designed to organize local cable and wireless wi-fi networks, receiving Internet provider information both via cable and from mobile operators. Provides support for IP-television. The Keenetic Giga 2 model is characterized by high performance, as well as the speed of receiving and transmitting information.

The hardware part of the model is designed to download information from file-sharing networks at speeds up to 1 Gbps over lines gigabit ethernet. Speeds up to 300 Mbps, according to the manual, are provided to wi-fi users.

The Zyxel Keenetic Giga 2 router has a high load capacity, is used as the main wireless network router, and also acts as an amplifier, adapter, repeater (repeater) to expand the w-ifi coverage area when routers work together.

The presence of two USB ports allows you to connect to it various peripherals and external drives. As well as 3G / Internet operators of any type of connection.

The Keenetic allows you to set individual settings for some built-in functions, such as a torrent client or media server.

Unfortunately, the model does not support the ability to change the assignment of function buttons.

Appearance

The indicators of the front panel of Keenetic "Giga" 2, corresponding to the description, with conditional symbols printed on them, help the user to control the state of the router, the enabled modes, the health of the communication lines with the local network devices. These include the following:

• "Status": steady light indicates that the product is powered on and is operating normally. A slow blink indicates either bootup or an internal fault.
• "0-4": connect to the network connectors on the back of the Keenetic Giga. Glow corresponds to an established connection, blinking informs about the transfer of information.
• The symbol of wireless wifi - a constant glow - informs about the normal operation of the network. When data is being transferred, the indicator flashes quickly. Slow blinking indicates a quick setup session using WPS technology.
• "Internet Globe": a constant glow informs about the establishment of a connection and the receipt of the Keenetic Giga II IP address in the provider's network.
• Symbol for connecting to USB connectors: “light” corresponds to a connected and ready-to-use device, frequent blinking indicates preparation for safe removal from the USB-drive connector. There are two multifunctional USB connectors on the right side panel of Keenetic Giga II. Devices compatible with the router are connected to them: 3G / 4G modems of mobile Internet operators, external flash drives, HDD or SSD, printers. The back panel of Keenetic Giga II is designed to place various connectors and control buttons on its surface:
• "Home network 1-4": RJ-45 type LAN network connectors for wired LAN subscribers, one of which is loaded with a switch.
• "Internet 0": WAN-type RJ-45 connector of the ISP cable.
• Two high-frequency RP-SMA connectors, where removable wi-fi antennas are screwed.
• "Power": a plug-in connector for connecting an AC adapter with an autonomous on / off button.
• FN is a multifunctional button whose properties are assigned in the Keenetic Giga II web interface. By default, performs the function of preparing a safe extraction USB devices from the socket.
• "Reset": button for current user settings to factory defaults.
  On the top cover of the Ziksel Giga II case there is a wireless network control button. It is used in two modes, depending on the time it is held down. A short press and release creates a quick router setup using WPS. Pressing and then holding for more than three seconds turns wi-fi on or off.

Giga connection and preparation for work

If the provider has in the database the MAC address of the computer used before installing Keenetic Giga, you need to inform the technical support service of the new physical address. Information about it is on the product label in the form of a 12-digit set of letters and numbers. The address is assigned by the manufacturer and is a unique identifier.

The provider's cable is connected via a dedicated Ethernet line to the RJ-45 connector of the router with the designation "0" on its rear panel. When connected to the Internet mobile operator using a 3G/4G USB modem and one of the universal connectors. It is possible to connect the modem via an additional adapter cable and place it in the zone of reliable radio signal reception.

To configure Keenetic Giga, we use a computer (PC), connector network card which is docked with a “patch cord” (from the butt to the router) with any of the RJ-45 with the designation “1-4”. The manufacturer recommends "1". Network adapter power supply must be plugged into the "Power" socket, and its plug is inserted into the home network socket alternating current. The Power button is pressed last. Do not forget to screw the removable antennas into the Keenetic Giga RF connectors. To improve the conditions for the propagation of Wi-Fi radio waves, their vertical position is preferable.

Settings

After switching on mains supply We are waiting for the constant glow of the indicators "Status" and "1". Then we check the setting of the PC network card to receive an IP address in automatic mode (properties of the TCP / IPv4 protocol).
For the Zyxel Keenetic Giga II router, we configure via the web interface. To access it, you need to use the information on the label of the Keenetic Giga-2 product. We are interested in the IP address on the Internet. The found value - 192.168.1.1 - enter in the address bar of any browser open on the PC, press the Enter key.

If the steps are performed correctly, the authorization page opens. After entering the standard default values: username and password - admin/1234 (admin), executing the login command, you are prompted to change the default password. The decision is made by the user.

Automatic setting

On the main page of the Keenetic Giga interface, options for setting up the router are provided. When connected to the Internet via a dedicated line, you can use the services of the "Wizard" and work in an interactive mode. To do this, press the "Quick Setup" button.
In the window that opens, we decide on the need to bind to the MAC address of the device. For Keenetic Giga II, this will depend on the selected Internet provider.

After continuing, the next page opens, where the mode for obtaining an IP address is configured. Leave the default value of "Automatic" or select the static IP mode, if one is used.
After executing the “Next” command, we get to the page for connecting Keenetic Giga to the Internet. Here you need to enter the login and password data from the contract concluded with the service provider in the appropriate fields or mark the box for the absence of the latter.
After executing the "Next" command, a window will open with a summary summary and the result of connecting to the Internet.
The "Wizard" has finished auto tuning.

Connecting to the Internet manually using some providers as an example

Manual connection is provided from the start page by clicking on the "Web configurator" stencil. First, you will receive an authorization proposal with standard values ​​or with a new and confirmed user password. Click "Apply" and get to the start page of the Keenetic configurator with a horizontal row of tabs. For all providers, the user first sets up a connection to the "global network". To do this, in the "Internet" section, go to the "List" tab.

"Home ru"

Select the item Broadband Connection (connection), click on it with the cursor.
Next, select the port to connect to the provider, ticking it. In Keenetic Giga II, you can choose any of the five possible ones. Then we assign a name to the new connection, mark the “Enable interface” item with a marker, leave the IP configuration mode “Without IP address”. Write the MAC address "Default", press the "Apply" button.

In the next step, click on the “Authorization” tab, select the “Add connection” item.
This provider uses the PPPoE type. We indicate it in the appropriate field, check the boxes "Enable", "Chap authentication". We write down the name and password issued by the provider, execute the "Apply" command.
There is a transition to a page with a list of created connections and YES marks in the last cell. On the front panel of Keenetic Giga II, there is a constant glow of the indicator with the "Internet globe" symbol.

Rostelecom

In addition to the connection of the PPPoE format, the operator provides subscribers with a dedicated static IP paid on the basis of an agreement and a connection of the "Dynamic IP" type. PPPoE has been discussed above. A static IP address is allocated mainly to corporate clients of companies at the request of organizations. In this case, information about the assigned address, the provider's subnet mask, and the default gateway is added to the settings.
In addition, the checkbox "Obtaining an address via DHCP" is unchecked.

"Dynamic IP" does not require when setting up a connection the information provided by the provider in the contract, but the Zyxel Keenetic rule on binding to the MAC address of the router or cloning the address of the PC used on this leased line must be observed. At the last step, the “Apply” command is executed, the created connection is controlled in the interface, and the glow of the indicator on the front panel of the Keenetic Giga is checked.

"Beeline"

To work with the operator in the "List" tab with the subsequent transition to creating a Broadband Connection, we control the installation of markers in the following points:

After clicking on the "Authorization" tab, we put a mark in the "Enable" item. The connection protocol used will be L2TP. In the server address line, write tp.internet.beeline.ru. We fill in the following fields with data (login / password) from the agreement with the provider, execute the “Apply” command.
The connection is controlled by obtaining an IP address from a DHCP server. On the front panel of the Keenetic Giga, the Globe will light up.

NetByNet

PPPoE is the type of connection used by this operator. After concluding an agreement with him, choosing tariff plan setup should not cause difficulties for an ordinary user of Keenetic Giga II devices. You must first inform the provider of the physical MAC address used.

Backup connection via 3G, 4G

First, we use the USB port to connect the modem directly or through an adapter extension cable. Internet connection is created using mobile operators. To do this, on the start page of the interface, select the tab with the USB designation, when opened, it is possible to get acquainted with information about the connected modem, its technical specifications and software version.

On the page in the upper right corner there is an additional tab “NetFriend Quick Setup”, when clicked, the program built into Keenetic Giga will set the necessary connection parameters for the selected model, taking into account the inserted SIM card of the mobile operator. The procedure ends by pressing the "Go online" button.

Wireless network

The setup begins with selecting a section with the designation Wi-Fi in the interface of the Keenetic Giga router. In it, click on the “Operating Mode” tab, tick the “Access Point” item to organize a local network based on the router used.
Execute the "Apply" command. After that, go to the "Access Point" tab.

On the new page we assign a name to the network by which it can be identified among the rest. The 802.11n format is set by default, we leave the radio channel number in the “Auto” position, check the “Connection security” item and use its maximum level (WPA2). We write down the security key (password) in the corresponding field, to create which we use 12-15 characters. For reliability, it must be recorded and saved. We finish the procedure by executing the "Apply" command.

Do not forget about Keenetic Giga support for quick setup mode using the WPS button. Its quick press without holding allows you to connect to any wi-fi network when using the router as a client, amplifier or repeater (repeater). A glowing indicator on the front panel with a Wi-Fi symbol indicates uptime.

Setting up as a repeater (repeater), amplifier, adapter or access point

Support for these Keenetic Giga II modes allows the router to expand the access zone to an existing wireless network. The new "grid" will have the same name as the existing one. Subscribers within its limits can move, automatically selecting the source, the radio signal strength of which is greater. In this case, the condition for reliable operation is the coincidence of the working channels of the devices of the main router and the Keenetic Giga, which works as a repeater. The name and channel number on both routers are set in their settings based on the analysis of the smallest number of nearby available networks.

You can switch Keenetic Giga II to the wi-fi coverage area expansion mode from its interface by selecting the "System" section, and in it - the "Mode" tab. In the drop-down list, mark the "Amplifier" item with an asterisk. Click on the "Apply" stencil.
After that, a window appears asking you to reboot the Keenetic Giga router. Click on the "Now" button and get an extended range of wireless wi-fi. To install a Zyxel router, the location is chosen empirically.

IPTV

The main providers deliver television traffic in an "untagged" form. This makes it easier to set up a connection. It boils down to allocating a LAN port (1-4), to which a set-top box will be connected using a cable with RJ-45 connectors at both ends. At the same time, the program built into Keenetic Giga will switch it to the mode of direct receipt of IPTV traffic from the WAN port of the provider used (transparent "bridge").

In the main menu of the interface, the icon "Internet" (globe) is selected. In the menu that opens, click on the "Connection" tab, where we find the Broadband Connection item and click on it.
On the new page, activate the "Use connector ..." box by checking the box and executing the "Enable" command. After saving the settings made with the "Apply" button, the port is used only for broadcasting the television signal transmitted to the user from the Internet provider for the operation of the set-top box.

Keenetic Giga supports the DyDNS function. It was created for Internet users who search for the resource they need through search string, introducing into it Domain name. When using a dynamic IP connection provider, the new assigned address will no longer match the previous "remembered" name, and this will cause difficulties for regular users of the site. Dynamic DNS keeps the domain name constant whenever the IP address changes.

The settings are entered by opening the "Internet" section and then clicking on the DyDNS tab. After the conclusion of the contract on the server site, the user fills in the appropriate fields of the page that opens.

IPv6 protocol

The Keenetic supports IP version 6 only on NDMS v2 and higher firmware. It is recommended that you first go to the vendor's official website and check for the latest versions of the router's OS. How to update will be described below in a separate section of the article.

Security Settings

Any router that has an IP address on the Internet performs the function of protecting local network subscribers from various kinds of Internet attacks, being a kind of firewall. Keenetic Giga II is no exception. When configuring it, the user defines access rules for Internet users and their priority. This list includes both wired Keenetic Giga clients and mobile network members.

Certain hosts are assigned unfettered access, others are denied access. The page for creating rules opens after selecting the "Security" section on the main page of the interface, and in it - the "Firewall" tab. A list of interfaces opens with IP addresses and an indication of what to do if they are found. The list can be expanded or shortened. It also changes the actions applied to each participant. Finally, execute the "Save" command.

Parental control

This function, for the most part, is the control of the boss over his employees in local networks, the divisions they manage to create a work schedule for its participants. In addition, there is a filter for devices allowed to connect. This parameter is configured in Keenetic Giga in the "System" section of the main interface page and go to the "Schedule" tab.

The new interface is presented in the form of a visual graphic image with the days of the week and the permitted work schedule with the time (hours, minutes). As well as devices operating according to the established schedule. After executing the "Apply" command on the "Schedule" page, Keenetic Giga will display a list of devices allowed to work on the network at a certain time.

Printer setup

The Giga 2 model has two USB connectors, a printer is connected to them. It is also possible to set network printer using an internal DHCP server. We go into its configuration, select the section responsible for reserving IP addresses, enter the address of the printer.

Setting up DLNA on the router

The router supports the media server option. To do this, you need to connect an external media via the USB connector - a flash drive or an external HDD, for example. Go to the "Control Panel" of the network device. Go to the "Applications" section, item " DLNA server". Check the box next to "Enable". Leave the "TCP Port Number" field blank. Select media file directory: specify the path to the USB drive.

The media server is only supported if the corresponding component is installed. Its availability is checked in the "System" section, "Components" item.

Setting up a torrent client on a router

The router supports the torrent client function built into the Keenetic Giga software. The user does not need to wait for the download to finish. He needs an external drive with a USB interface to which the received information will be loaded.

Before configuring the VPN server, make sure that the component is installed. To do this, go to the "System" tab, "Components" item. Check for the appropriate option. If it is present, there is a “bird” opposite, which indicates its activation.

Possible malfunctions and ways to eliminate them

Usually, Giga router malfunctions are divided into points:

• operator errors in the process of setting parameters;
• malfunctions in the hardware of the device;
• failures in the operation of the software either during configuration or as a result of external influences.

Most faulty cases are resolved by rebooting the network device or resetting it to factory settings. In the first situation, simply turn off the power, wait 2-3 minutes, and then turn it back on. The second option is detailed below.

Sometimes the “culprit” is the service provider and the incorrect operation of its equipment. Analysis of each of the reasons is the topic of a separate article. If a malfunction occurs during the warranty period, contact the technical support of the Internet provider to explain all the steps taken.

Firmware update

Every router user knows about this operation. The firmware not only eliminates the failures that occur, but also adds new functions to the device, implemented by the manufacturer as a result of the analysis of operation statistics. When you go to the "System" section, select the "Firmware" item. For the need to update the software, we look at the current version of the Keenetic Giga II software and compare it with latest version for the current date on the site zyxel.ru.

Via web interface

To update, if required, download the .bin file from the Firmware section and save it to the PC.
On the "Firmware" page, press the "Browse" key, find the path to the downloaded file.
We execute the "Update" command. After the process is completed, the system will reboot with the new software.
The entire procedure must be carried out with the system powered by a UPS, or an uninterruptible power supply. It is possible to check the version of the new Keenetic Giga firmware by returning to the “Firmware” item. After the procedure, the current Keenetic Giga settings have to be redone.

Via mobile app

The vendor has released an application for mobile platforms with support for Android and iOS called My keenetic. Installing the program on mobile device, let's run it. After connecting to the router, an update message will appear. Click on it, wait for the end of the process.

Via USB device

Download the current version of the firmware from the official website, copy it to a flash drive. Next, connect it to a network device.

We go to the “Router Control Panel”, go to the “Updates” section. Specify the path to the installed flash drive, start the update process. After it ends, the Keenetic will automatically reboot.

Reset router settings to factory settings

In all devices to factory values. They are used in cases of errors during settings, incorrect operation of the device or loss of a previously changed password for entering the product interface. For the first method (hardware), the Reset / Reset button is recessed into the case on the rear panel of the Keenetic Giga II. Its pressing and holding for 10-15 seconds. starts the update process. At the end of the blinking of the indicators, the interrupted setting is carried out again.

Soft reset is carried out from the "Control Panel". In it, go to the "System" section, click the "Settings" tab.
At the bottom of the page, click the "Return to factory settings" stencil. With the subsequent warning about resetting the settings, click the “Yes” stencil, agreeing with this. After rebooting the router, you can continue working with Keenetic Giga.

Conclusion

The Taiwanese manufacturer Zyxel, when releasing a new model, tried not only to give the product a new name, expanding the model range, but to make significant changes to the hardware and software stuffing. Using the latest components, Zyxel has achieved a significant increase in the speed of Keenetic Giga II, which especially pleased fans of downloading information from file-sharing sites.

External antennas, combined with a powerful amplification module, provided high-quality wireless communication anywhere in the consumer's living space. The addition of Giga (gigabits per second) in the name justifies itself.

pros

Users attribute the increased performance of Keenetic Giga II to the positive qualities due to the increase in the speed of writing and reading over the channel of external drives connected to any USB connector. If for predecessors it was 4-5 MB / s, for this model the speed is limited to 15 MB / s. This allows you to "download" HD movies, spending no more than half an hour on it, using the BitTorrent client built into the software. The Intelliqos smart consumer traffic distribution function has been implemented.

The ability to use a mobile 3G / 4G modem of any operator allows you to use Keenetic Giga II not only in urban areas, but also in country houses where the cable network is not developed. DLNA support gives you the chance to view and listen to video and audio content, as well as information from a connected external USB drive.

Minuses

Keenetic Giga-2 has few negative ratings. Those with access to the Internet only through a telephone line will not have to take advantage of the speed due to the limited speed of the provider. It can be noted that there is only one Wi-Fi band (2.4 GHz), which in urban conditions requires the search for the optimal channel and its bandwidth to ensure a minimum of interference. The remaining "cons" are associated with personal preferences and habits of users (color, body shape, and so on).