Enable or disable the network card on the computer. NetView Local network map Fine-tuning the windows 10 network card

If you have at least once encountered the technical support of an Internet provider, or the support of some program related to a local network or Internet access, then most likely you were asked about configuring the network settings of your computer. For novice users, this is a dark forest, of course. And such a question introduces the poor fellow into a complete stupor. As a result, for the simplest manipulations, you have to call a computer wizard and pay him money. But everything is very simple. In this post, I will talk in detail about the basic network settings in Windows 10.

In the Windows 10 operating system, network settings mean the configuration of the TCP / IP protocol on the network adapter, as well as setting the parameters for accessing a computer from a network (local or global).

1. Internet protocol version 4 (TCP/IPv4)

Click the Start button and enter the words in the search bar:

View network connections

The result should look like this:

We click on the icon from the control panel and we open the "Windows 10 network connections" window:

Select the one you want and right-click on it. The properties window will open. These are the basic network adapter settings in Windows 10:

Now we need to find the parameter IP version 4(TCP/IPv4) and click on it twice with the left button of the rodent. So we get into the configuration of the main network protocol IP. There are two options for setting it up:
1 - dynamic IP address.

This option is relevant when a DHCP server is running in the local area and the computer already receives its IP from it. It is usually used when connecting a PC to a home WiFi router or to a carrier's network. The protocol protocol configuration in this case looks like this:
That is, the system receives all addresses automatically from a special server.
2 - static IP address. In this case, ah-pi needs to be registered statically, that is, this address will be assigned to this particular computer on an ongoing basis. It looks like this:

What addresses should be entered in the fields?
Look, the screenshot above shows an option with connecting to a router or modem with DHCP server turned off.
The gateway IP is the address of the router itself on the network. It will also be used as the primary DNS.
Secondary DNS can be specified by the provider's server, or public DNS servers Google (8.8.8.8) or Yandex (77.88.8.8).
The mask used in home networks in 99 cases out of 100 is a regular 24-bit mask: 255.255.255.0 .
The IP address must be selected from the gateway subnet. That is, if the gateway is 192.168.1.1, then you can take any from the computer from 192.168.1.2 to 192.168.1.254.
The main thing is that he should not be busy with anything else.
Click on OK and close all windows! The main network protocol in Windows 10 is configured.

2. Sharing

The configuration of these network settings is responsible for accessing the computer from the network. To get here, in the Network and Internet section, select your adapter (WiFi or Ethernet) and click on the "Change advanced sharing settings" icon. This window will open:

Here you can see network access settings for several profiles: Private, Guest or all networks. Choose the one that has a mark at the end (current profile).
First comes Network discovery. It is responsible for whether your PC is visible from the network or not. If you are connected to local network at home or at work, it is better to leave it on. But when the computer is connected to the Internet directly, then in order to avoid threats and attacks, it is better to disable detection.
Next comes Sharing Files and Printers. If it is enabled, then anyone can connect and use the printer that is connected to your PC. For a home network, this does not matter, but in a corporate or public network it would be better to turn it off.
The last options are Connecting a homegroup. It is responsible for guest access from the network to the computer. If you allow Windows to manage connections, access will be through the Guest account. On a home network, this is more convenient. For others, it's better to use user accounts so that anyone can't access you.
We save the changes.

These are the main network Windows settings 10, responsible for the network and connecting the computer to the Internet.

A local network allows you to establish a connection between several computers in the same room by establishing file sharing. As a result of setting up a home network, users get the opportunity to work on the same document on different computers or play games together.

LAN capabilities

Windows 10 network setup allows you to get a number of convenient features that will useful users having several computers at the same time.

Sharing files from different computers. Fast data transfer regardless of volume.
Sharing a printer, scanner, or other network device.
Setting up network games and entertainment.

These are the main areas, each of which contains a number of possibilities. For example, fast data transfer allows you to create backup important information so that if one machine stops working properly, the information you need remains available from another computer.

To start using all these features, you first need to properly configure the local network in Windows 10. You can connect machines that have the same versions installed, a PC and a laptop with different Windows versions- in the interval between the "seven" and "ten" there are no restrictions on compatibility.

Network creation

The first step is to set the same workgroup name on all computers that you are going to link to the network. On Windows 10 and other versions, this is done the same way:

Click Win+R to call the window " Run».
Enter " sysdm.cpl" to open the system properties.

The "" tab will appear immediately. See what the name is working group. To put the same name on other computers, click " Change". Use only latin letters!

Then the setting continues in " Network and Sharing Center”, which is launched through the control panel or the connection icon in the notification area. The next step is to change the advanced settings.

On Windows 10, you can still get here through the section " VPN» tab « Network and Internet» in system settings.

Here you need to enable network discovery with automatic configuration, file and device sharing, and allow the system to manage homegroup connections.

Attention: enabling network discovery and sharing without a password is required for all profiles! First you'll set up a home or work profile, then a general profile and all networks.

This operation should be repeated on all computers. As a result, the participants of the local network should have:

One workgroup name assigned.
Network discovery allowed.

If the home network to which the computers are connected is built on the basis of one router, then the listed actions are sufficient for the normal operation of the local network. If the computers are connected directly using a crossover cable or the DHCP service is disabled on the router, which independently distributes IP addresses to the machines, then additional configuration should be performed.

Open " Network Control Center", then go to the " Change adapter settings».

Select the network card where the crossover cable is installed and open its properties.

Check " Use the following IP" and " Use the following DNS". Fill in the rows with the values shown in the screenshot.

On the second computer, you need to add the following data:

On the different computers The IP address will be different. If you wrote 192.168.0.2 on the first machine, then the second address will be 192.168.0.3 and so on, depending on the number of network participants. The rest of the data remains unchanged.

Turn on sharing

A local network has been created, but in order to use programs and files stored on another machine from one computer, you must also set up general access for them. Windows 10 network setup this essentially ends. Let's make a shared folder with documents:

Right click on the folder, open properties.
Navigate to the " Access", click on the button" Advanced setup».

Check the box " Share". Click on the button " Permissions».

Set permissions. If you want to be able to open the directory from another computer and view its contents, then check the box " Reading» in the column « Allow". To grant full access, check the corresponding box. Save the configuration by clicking " OK».

Then you need to return to the folder properties and go to the " Security". Here you should press the button " Change».

The window “ Group Permissions". Under the field Groups or Users» click « Add».

Enter your name " All” (quotes are not needed), press “ OK».

Set the same permissions as you did earlier when setting up access.

After enabling sharing, it is recommended that you restart your computer in order to Windows 10 network setup completed correctly. The next time you turn on the explorer, a section will appear " Network”, which will display the computers between which the connection is established.

Inside the directory under the name of the other computer, you will find the folders that are shared.

Inside the folder will be the same documents that are stored on another computer. If you have given full access in the settings, you can safely edit them from another machine.

Sharing Internet Access

If the local network is built without a router, using a direct wired connection of computers, and one machine has Internet access and the other does not, then this is quickly corrected. The described actions are performed on the computer that has a connection to the global network.

Click the connection icon in the notification area. Open " Control center” and proceed to change the adapter settings.

In the list of available connections, find your WAN connection. Open its properties, right click.

On the tab " Access» Allow other members of your home network to use this Internet connection.

Now from one computer the Internet will be distributed to other participants in the network. This will affect the speed, but when accessing from different devices through a router, the speed is also divided in proportion to the load, so this is a common practice for sharing the Internet.

How to connect and configure the Internet on personal computers from the operating room Windows system 10 - the topic of the article. It will be especially useful to unprepared users who have updated their PC to latest version, but still not understanding all the intricacies of the settings. Some users do not know where and what is configured to connect to the Internet, while for others it does not work at all, even with the correct settings.

You'll learn four different connection methods - standard Ethernet, high-speed PPPoE, wireless, Wi-Fi, technology, and modems.

So, how are the correct parameters set, or the connection is configured again if the Internet is not connected.

There are several ways to connect your computer to the global network. You will learn about four basic connections:

About a standard Ethernet connection that connects with a cable. It uses a direct connection, modem technology or a router.
About a high-speed connection that supports the PPPoE tunneling protocol.
About wireless, wi-fi, technology.
About connecting to the Internet using 3G/4G USB modems.

So, what is each connection and are there subtleties in its settings. The first method, an Ethernet connection, is the most common.

Ethernet: Internet connection in Windows 10 via network cable (router, modem)

Ethernet, a packet data technology, is called the simplest connection. Internet service providers lay network cables to houses and connect individual apartments. With this connection, the Internet can be connected directly or through a router, ADSL modem. This is the same internet connection, but connected using various devices. To be more precise, it is used everywhere network cable, only the connection method is different - direct or through special devices for packet data transfer.

To set up an Ethernet connection, connect a cable from a router, modem, or service provider to a personal computer in a special slot for network cards:

After a system update, this is a common problem. The driver for the card is installed automatically during the update, by the OS itself, but for some reason it does not work. And you can solve the problem by installing the correct driver. To do this, you need to download it on the official page, choosing your PC model, and install it on the device.

Now, what to do if, after connecting the cable, the connection is activated, but its status is “ Limited"? The reasons may be hidden in the incorrect parameters of the Ethernet adapter.

To check the correctness of the settings and set the desired parameters, do the following:

If all parameters are correct, the Internet connection status will be active. If the status does not change, try rebooting. If even after the reboot the network is not found, not recognized or limited, make sure that the network cable, router, modem are connected correctly. Also contact the technical support of your service provider - perhaps the problems are on their side.

If you connect without routers and modems, that is, directly, check with your provider for the conditions for providing Internet services. You may need to tie your internet connection to the MAC address of your network card. If so, then after binding, the Internet will immediately work for you.

Setting up a high-speed connection (PPPoE) in Windows 10

If you use a router with configured connections (including PPPoE) to connect to the Internet, you do not need to change any settings on the PC. Simply connect the cable to the device and set up just like you would with an Ethernet connection.

If you connect to the network via cable directly, without devices, and with a password and login, you must first create this connection.

To create a connection, do the following:

Click on the icon and delete, change connection settings, etc.

Internet connection via Wi-Fi

In the presence of WiFi router you can connect to the Internet wirelessly. You can also connect your PC to the network of friends and other places where there is free access. The first thing to do using this internet connection is to check the driver. If it is installed, the system usually does it automatically, open the available networks, select your Wi-Fi and enjoy the connection. Well, perhaps, you will first have to enter a password if there is protection.

Connecting wirelessly, Wi-Fi technology on Windows 10 is easy.

Setting up the Internet via a 3G / 4G modem in Windows 10

And finally, the fourth method of Internet connection, which uses 3G / 4G modems (3rd and 4th generation mobile communications). The first step is to connect the modem to the computer. But for the device to work, a workable and suitable driver must be installed for it.

It is better to download drivers from official resources - it's more reliable. This is in the event that you did not find a disk with them in the box with the modem. When looking for a driver, be guided by the modem model. If it is not yet released for Windows 10 by the manufacturer, download it for other OS versions. Should come up.

The modem is connected, the driver is installed and the setup begins. Looking ahead: the connection is configured in almost the same way as high-speed PPPoE Internet.

So, do the following:

If the parameters are set correctly, you will see the created and activated connection. If not, the settings may be incorrect or the modem is not properly connected to the PC. If this does not help, contact technical support for clarification. With poor coverage and a weak signal level, the Internet will be slow or not work at all. Sometimes it helps to increase the signal level, but it is best to take care of buying an antenna for the modem.

The connection you created can be edited, deleted, and so on. To change settings and other actions, click on its icon.

On the panel with notifications there is an icon of your connection. Monitor its status, stop, reconnect, set new parameters if necessary, etc.

This is how easy and short it is to connect and configure the Internet on Windows 10.

And a few more words

Now, by connecting your computer / laptop to the Internet, you can turn it into a Wi-Fi router and distribute the Internet to peripherals- other PCs, smartphones, tablets. In this case, you do not need to buy special equipment for this. All you need is to create an access point on your computer using one of the free specialized utilities. . Understand it under the force and unprepared user.

Did you connect via cable or wireless network with the correct settings, but the Internet did not work, and you see a notification about and a yellow exclamation mark? This error is common on personal computers with OS of the Windows family, and in new version, and on the old ..

If you have at least once encountered the technical support of an Internet provider, or with the support of some program related to a local network or Internet access, then most likely you were asked about setting up the computer's network settings. For novice users, this is a dark forest, of course. And such a question introduces the poor fellow into a complete stupor. As a result, for the simplest manipulations, you have to call a computer wizard and pay him money. But everything is very simple. In this post, I will talk in detail about the basic network settings in Windows 10.

1. Internet protocol version 4 (TCP/IPv4)

Click the Start button and enter the words in the search bar:

View network connections

The result should look like this:

We click on the icon from the control panel and we open the "Windows 10 network connections" window:

Select the one you want and right-click on it. The properties window will open. These are the basic network adapter settings in Windows 10:

Now you need to find the IP version 4 (TCP / IPv4) parameter and double-click on it with the left button of the rodent. So we get into the configuration of the main network protocol IP. There can be two options for setting it up: 1 - dynamic IP address.

2 - static IP address. In this case, ah-pi needs to be registered statically, that is, this address will be assigned to this particular computer on an ongoing basis. It looks like this:

Secondary DNS can be specified by the provider's server, or public DNS servers Google (8.8.8.8) or Yandex (77.88.8.8).

The mask used in home networks in 99 cases out of 100 is a regular, 24-bit: 255.255.255.0. The IP address must be selected from the gateway subnet. That is, if the gateway is 192.168.1.1, then you can take any from the computer from 192.168.1.2 to 192.168.1.254. The main thing is that he should not be busy with anything else.

Click on OK and close all windows! The main network protocol in Windows 10 is configured.

2. Sharing

Here you can see network access settings for several profiles: Private, Guest or all networks. Choose the one that has a mark at the end (current profile). The first is Network Discovery. It is responsible for whether your PC is visible from the network or not. If you are connected to a local network at home or at work, then it is better to leave it on. But when the computer is connected to the Internet directly, then in order to avoid threats and attacks, it is better to disable detection. Next is File and Printer Sharing. If it is enabled, then anyone can connect and use the printer that is connected to your PC. For a home network, this does not matter, but in a corporate or public network it would be better to turn it off. The last option is HomeGroup Connection. It is responsible for guest access from the network to the computer. If you allow Windows to manage connections, access will be through the Guest account. On a home network, this is more convenient. For others, it's better to use user accounts so that anyone can't access you. We save the changes.

These are the main network settings in Windows 10 that are responsible for networking and connecting your computer to the Internet.

set-os.com

How to reinstall network card driver and reset network settings in Windows 10

If you are having problems with the network or the Internet in Windows 10, then it is worth reinstalling the network card and resetting the network settings to the default values. Don't know how to do it? A new feature in Windows 10 will help you - automatically reinstall drivers and reset settings.

Network problems in Windows 10 are a fairly common topic. They do not always occur through the fault of the operating system, often the cause is incorrect user settings or problems with the drivers of a specific network card model.

How to reinstall network card and reset settings in Windows 10

If you want to fix problems yourself, Microsoft has made it easy for you. Windows 10 has a very useful feature that allows you to automatically reinstall the network card driver, as well as reset the settings to default values.

If you are having connection problems, you can follow the steps below to reinstall the drivers and restore network components to factory settings.

Go to the Start menu and click on the gear icon to enter System Settings.

Then go to the "Network and Internet" section. On the Status tab, you can check your Internet connection. Here we are interested in two points, in particular - "Network Troubleshooter" and "Network Reset".

To get started, use the first item, before resetting to default settings. There is always a chance that after completing the first step, the problem will be solved and there will be no need to reinstall the drivers.

After entering the "Troubleshooters", click "Next" to enable scanning for faults. If the troubleshooter finds any issues, it will immediately attempt to fix them automatically. You may need to restart your computer after the restore operation is complete.

If the above actions did not bring desired result, then go to the second step to reset the settings and reinstall the components.

Go to Settings again, then "Network and Internet" - "Status". This time, scroll down on the right side of the window and select Reset Network.

A message will appear in a new window that this action will remove and reinstall all drivers on network devices, reset settings (for example, you will need to re-enter the password for the Wi-Fi network), and also return all system components responsible for network operation to the initial settings. Confirm this procedure with the "Reset Now" button.

After performing the reset, restart your computer and check that everything is now working.

NetAdapter is an alternative network troubleshooting method

Basic network and Internet connection problems can often be solved with simple methods - just reinstall the network card drivers, change DNS to a Google address, update IP settings, and similar operations. However, all these settings are scattered across various sections of Windows. What if everything was in one place?

It is for this purpose that the NetAdapter utility was developed, which groups all the network troubleshooting tools in one window. That is, with one click, you can perform the above operations and more. However, this is not a tool that can magically solve absolutely all network problems, but given the nature of common problems, there is a good chance that the program will help you find the causes of network component failures and solve them.

The program must be run with administrator rights (right-click - run as Administrator). The right side of the program window contains information about the network card and connection - IP address, MAC address, current use of the DNS address, etc. On the left, in turn, are all the tools for configuring and diagnosing the network.

Among the tools available here are resetting temporary DNS memory, changing DNS addresses to Google (for example, it helps when the Internet connection is active and the pages do not open), cleaning hosts file(also viewing its contents), updating IP, resetting configuration and security settings, resetting network settings, rebooting NetBIOS. You can also use spoofing to change the MAC address network adapter. To activate tasks (one or more), select them from the list and then start using the button at the bottom of the window.

Additional tools (Advanced Repair Tools) are also available that allow you to troubleshoot problems related to the TCP / IP protocol, reset Proxy / VPN settings, and also diagnose the Windows Firewall. If you often experience network problems, then NetAdapter Repair All in One can save you a lot of time.

InstComputer.ru

How to set up Internet in Windows 10?

Detailed configuration of the operating system is quite complicated for the average computer user, so errors and difficulties often occur in the process. Especially when it comes to creating an Internet connection. It is not always possible to figure out where the network access settings are located and how to use them. However, reading this article will help clarify most aspects, thereby solving the issue of connecting to the Internet without calling a computer specialist.

Types of Internet connection

First you need to understand the network interfaces. There are several connections through which information is transmitted from the user's personal computer to the Internet space:

Normal Ethernet connection. It implies a direct connection of the provider's cable to the computer. Able to pass through a separate router or built-in ADSL modem.
High-speed PPPoE connection that provides fast data transfer with innovative network technology.
Wireless WLAN connection. It requires a router that supports the appropriate wireless interface.
Connection via portable USB modem. The speed of such a method will depend on the technology that provides data transfer. Today there is 3G and 4G connection.

We will try to explain how to configure all of the above network interfaces. If you already know which way to access the network you will use, then you can skip to a specific section.

Internet connection via Ethernet mode in Windows 10: via network cable (router, modem)

Let's first consider a simple connection to the Internet via an Ethernet port. It is characterized by the fact that it does not require a login and password for the full use of services. There is only a laid cable from the provider leading to the consumer's apartment.

To start setting up an Ethernet connection, you need to insert the cable connector into the router and connect the latter to a personal computer (it is also possible to connect to a network card without a router). You just need to plug the cable into the socket.

If the Ethernet connection settings have already been entered into the operating system, then the Internet will instantly work, notifying the user about this with a notification in the taskbar. If nothing happened after inserting the cable, you need to install the driver for the network card or router.
If a notification appears on the taskbar that the connection was successfully established, but the status "Unknown network" or "Restricted" is displayed, then you should carefully check the settings of the Internet adapter. This usually solves the problem of a non-working connection.

Setting up an Ethernet connection in Windows 10

In Windows 10, you can configure the adapter using the following instructions:

1. First of all, you need to click on the network connection notification and then select "Network Control Center" in the window that appears.

2. In the open window, select the section "Changing the settings of the (network) adapter", then a window opens with the available network cards. Here we point to the Ethernet adapter, right-click and open its “Properties“.

In the list that opens, select the item "IP version 4" and double-click on it. In the settings window that appears, check that the “Automatic connection of IP and DNS addresses” mode is set. If not, it should be noted. Upon completion, you must confirm the changes with the "Ok" button.

After all the above steps, the Ethernet connection should definitely work. Otherwise, you need to restart the computer, check the integrity of the network cables and make sure that there are no breakdowns on the side of the Internet provider.

Tip: in case of unsuccessful attempts to set up a network connection, you need to ask the provider about the presence of binding by MAC address. If there is such a binding, it is recommended to tell the provider the address of the computer. He will indicate it in his database and the Internet connection will start working.

Setting up a high-speed PPPoE connection in Windows 10

Some providers lay network cables in customers' homes, and then provide a special login and password required for mandatory connection authorization specific to this high-speed PPPoE connection. To configure it, you need the same practical manipulations as in the case of Ethernet. But with the only difference, which is the need to independently create a connection.

Tip: if the network cable passes through the router, nothing needs to be configured on the personal computer, since all settings are made in the router itself. You just need to insert the cable leading from the modem into the appropriate connector on the computer case. The sequence of actions for creating such a connection is described above.

In the absence of a router, you will have to connect the network cable directly to the computer. This will require knowledge of the login and password given by the provider. If a this condition completed, you can proceed with the following instructions.

First, the user needs to open the "Network Sharing Center" after clicking on the Internet connection icon on the taskbar.

Then you need to “Create a new connection” by entering the section of the same name. Select "Connect to the Internet" and click the "Next" button.

In the window that appears, select the item "High-speed connection" and click on it with the mouse. After that, the options will appear.

Now you should enter the username and password provided by the ISP. You can also name the connection with the name of the provider, so as not to get confused. Check the box next to "Remember password". After the actions taken, you need to press the "Connect" button.

In the case of correctly set parameters, the Internet should work in a few seconds.

You can view information about an established network connection and manage it on the taskbar by clicking on the corresponding icon.

If you click on the name of the connection, a special menu will open. In it, the user can change the connection settings at his discretion.

Connecting to the Internet via Wi-Fi in Windows 10

If you have a wireless router, connecting to the Internet via Wi-Fi is very fast. It allows you to visit the network from any home device, and also provides complete freedom of movement around the apartment due to the absence of cables. To set it up, you first need to install the appropriate wifi driver adapter. Although the Windows 10 system almost always does this automatically. A potential user can only open the list of available networks (WLAN), select the required one and enter the password set on the router. After a few seconds, the computer will connect to the Internet.

Click on the Internet connections icon on the desktop (bottom right), select the one you need by clicking on it, set the checkbox for the next connection and click “Connect“.

When connecting to a network, some problems may occur that are related to the network adapter driver, for more details, see the article Problems with the wireless Wi-Fi adapter driver in Windows 10.

Connecting and configuring the Internet via a 3G / 4G modem in Windows 10

It remains only to describe the connection method using a portable modem that supports 3G or 4G communication technology. If you have previously had the experience of installing such a connection on previous versions of the Windows operating system, then there will be no particular difficulties. And for those who are engaged in such an activity for the first time, below is detailed instructions.

First you need to insert the modem connector into USB port personal computer. The necessary driver can be installed by itself if the modem manufacturer has provided a corresponding function. Sometimes you need to deal with this issue yourself. For example, find a driver on the manufacturer's website or install from a disk. When connecting the modem, when prompted to install the driver, specify the path of its location, previously downloaded and by inserting the installation disk. If there is no driver for Windows 10, you can try software for previous versions of Windows 7.8 systems.
After finding the driver and installing it on your computer, you should start setting up the connection. The sequence of actions performed is similar to that which is carried out when creating a high-speed PPPoE connection. You need to open the "Network Control Center" after clicking on the status of the Internet connection on the taskbar.

In a small window that appears, you need to click on "Create a new connection" and select "Internet connection" (this item is the first in the list) and confirm with the "Next" button.

Next, you need to select the item "Switched". It is marked with a landline icon.

It's time to enter the parameters. This includes information such as number and custom name. This information provided by your ISP, so if you don't have one, you should contact your network service provider directly. The image below shows an example where the services of the Intertelecom provider are used. After filling in the text fields, you must press the "Create" button.

After performing the above steps, network connection should earn. If this does not happen, you need to check the USB modem and the signal reception quality. In some regions, the coverage is not very good and the signal may be constantly cut off, preventing you from working on the Internet. A variety of tricks, such as building up an antenna and going out into the open, are capable of solving this problem.

It is noteworthy that the created connection can be stopped, disabled or edited at your discretion. It can also be removed if the need arises to change the provider. To perform these manipulations, you need to click on the network connection icon on the taskbar and select the required item in the list that appears. It should be clicked - to display the control page (it is also available in the computer section “Settings” -> “Dialing“).

The signal reception status will always be displayed on the taskbar as a small icon. By its appearance, the user is able to determine what is currently happening with the connection. If the icon is blinking, data is being transferred. A crossed line means no signal at all. And if a yellow exclamation mark is displayed next to the icon, then there is a problem. The Internet in this case refuses to work.

Conclusion

If you have established a network connection on a laptop or personal computer with a Wi-Fi beacon, then you can use it as a router, in the article How to share Wi-Fi from a laptop on Windows 10. This allows you to distribute the Internet to all home devices without a wireless router.

As for the occurrence of the most common error "Limited". This notification has a yellow exclamation mark icon and indicates that there is no network connection. Its causes are varied, and if it appeared. This topic will be covered in the next article of the site.

The above instructions for setting up the connection turned out to be voluminous, but divided into sections. Therefore, if you need to create a connection, you need to go to a specific header and start reading. We hope that thanks to the article you will be able to set up a network.

pc4me.ru

How to set up internet in Windows 10

How to connect and configure the Internet on personal computers with operating system Windows 10 is the topic of the article. It will be especially useful for unprepared users who have updated their PC to the latest version, but still have not figured out all the intricacies of the settings. Some users do not know where and what is configured to connect to the Internet, while for others it does not work at all, even with the correct settings. You'll learn four different connection methods - standard Ethernet, high-speed PPPoE, wireless, Wi-Fi, technology, and modems. So, how are the correct parameters set, or the connection is configured again if the Internet is not connected. There are several ways to connect your computer to the global network. You will learn about four basic connections:

About a standard Ethernet connection that connects with a cable. It uses a direct connection, modem technology or a router.
About a high-speed connection that supports the PPPoE tunneling protocol.
About wireless, wi-fi, technology.
About connecting to the Internet using 3G/4G USB modems.

So, what is each connection and are there subtleties in its settings. The first method, an Ethernet connection, is the most common.

Ethernet: Internet connection in Windows 10 via network cable (router, modem)

Ethernet, a packet data technology, is called the simplest connection. Internet service providers lay network cables to houses and connect individual apartments. With this connection, the Internet can be connected directly or through a router, ADSL modem. This is the same Internet connection, but connected using different devices. To be more precise, a network cable is used everywhere, only the connection method is different - direct or through special devices for packet data transfer. To set up an Ethernet connection, connect a cable from a router, modem, or service provider to a personal computer in a special slot for network cards:

With the correct settings, the connection will occur automatically, and you do not need to enter either passwords or logins: they are absent in this connection. If the connection status has changed in the notification panel, then the Internet has earned. What to do if the network cable is normally connected, but the computer does not see it? You need to look for the cause in the drivers for the network card. After a system update, this is a common problem. The driver for the card is installed automatically during the update, by the OS itself, but for some reason it does not work. And you can solve the problem by installing the correct driver. To do this, you need to download it on the official page, choosing your PC model, and install it on the device.

Now, what to do if, after connecting the cable, the connection is activated, but its status is "Limited"? The reasons may be hidden in the incorrect parameters of the Ethernet adapter.

To check the correctness of the settings and set the desired parameters, do the following:

If all parameters are correct, the Internet connection status will be active. If the status does not change, try rebooting. If even after the reboot the network is not found, not recognized or limited, make sure that the network cable, router, modem are connected correctly. Also contact the technical support of your service provider - perhaps the problems are on their side.

Setting up a high-speed connection (PPPoE) in Windows 10

PPPoE or high-speed connection differs from Ethernet in just a few nuances. Internet service providers are also laying cables into houses and connecting individual apartments. But in order to connect to the Internet in this case, you will need a password, a login, and possibly some additional settings on a PC or router if wireless technology is used. But this is not the most important thing. In order for the Internet to work, it must be connected, that is, you must first create a connection, and only then enter logins and passwords. If you use a router with configured connections (including PPPoE) to connect to the Internet, you do not need to change any settings on the PC. Simply connect the cable to the device and set up just like you would with an Ethernet connection. If you connect to the network via cable directly, without devices, and with a password and login, you must first create this connection. To create a connection, do the following:

Click on the icon and delete, change connection settings, etc.

Internet connection via Wi-Fi

If you have a Wi-Fi router, you can connect to the Internet wirelessly. You can also connect your PC to the network of friends and other places where there is free access. The first thing to do using this internet connection is to check the driver. If it is installed, the system usually does it automatically, open the available networks, select your Wi-Fi and enjoy the connection. Well, perhaps, you will first have to enter a password if there is protection.

Connecting wirelessly, Wi-Fi technology on Windows 10 is easy.

Setting up the Internet via a 3G / 4G modem in Windows 10

And finally, the fourth method of Internet connection, which uses 3G / 4G modems (3rd and 4th generation of mobile communications). The first step is to connect the modem to the computer. But for the device to work, a workable and suitable driver must be installed for it. It is better to download drivers from official resources - it's more reliable. This is in the event that you did not find a disk with them in the box with the modem. When looking for a driver, be guided by the modem model. If it is not yet released for Windows 10 by the manufacturer, download it for other OS versions. Should come up. The modem is connected, the driver is installed and the setup begins. Looking ahead: the connection is configured in almost the same way as high-speed PPPoE Internet. So, do the following:

On the panel with notifications there is an icon of your connection. Monitor its status, stop, reconnect, set new parameters if necessary, etc.

This is how easy and short it is to connect and configure the Internet on Windows 10.

And a few more words

Now, by connecting your computer / laptop to the Internet, you can turn it into a Wi-Fi router and distribute the Internet to peripheral devices - other PCs, smartphones, tablets. In this case, you do not need to buy special equipment for this. All you need is to create an access point on your computer using one of the free specialized utilities. How to create hot spots for distributing the Internet to other devices is the topic of a separate article. Understand it under the force and unprepared user.

Did you connect via cable or wireless network with the correct settings, but the Internet did not work, and you see a limited connection notification and a yellow exclamation mark? This error is common on personal computers with OS of the Windows family, both in the new version and in the old ones.

What OS do you have installed?

pc-helpp.com

Internet setup in Windows 10

So, let's figure out how to set up the Internet in Windows 10. I want to say right away that this question is quite extensive, so let's start from the very beginning to the very end - from setting up a network card to choosing a browser.

Step #1: Preflight check

First, you need to check if everything is in order with the network card. In other words, whether the driver is installed on it. In most cases, Windows installs it on its own, however, if you have old or unusual hardware, you will have to do this step manually. So, to check if you have a driver for the network, do the following:

Press Win + X and select "Device Manager" in the menu that appears;
Expand the "Network adapters" section (it is located almost at the very bottom of the list) and check if your network card is there;
Also, it does not hurt to pay attention to the "Other devices" section, marked with a yellow triangle, if it contains devices with the names "Network adapter" or "Networkadapter", then you still have to look for a driver.

The "firewood" themselves can be found either on a disk with your motherboard, or on the manufacturer's website (this is especially true for laptops). Don't worry if you don't have a driver for Windows 10 at hand - in 95% of cases, the one that was written for Windows 7, 8 or even Vista will work just fine. In this regard, the question of how to set up the Internet in Windows has not changed over the past 10 years.

Step number 2: check the network settings

If your network is configured correctly, then the Internet should start working after installing the driver. Otherwise, in order to “finally configure the Internet in Windows”, we recommend that you check the network card settings.

Step #3: connect to WiFi (if available)

For some, the question of how to set up the Internet in Windows is identical to how to set up WiFi. If you are using a WiFi connection, then you now need to connect to the network. To do this, left-click on the icon with the "ladder" near the clock and, in the window that appears, select your home network. It remains only to enter the password and you are already in World Wide Web.

Step 4: choose a browser

The matter remains small - to choose a program with which you will surf the Internet. Here I immediately want to say that felt-tip pens are different in taste and color, however, if you want to approach this issue wisely, we recommend that you read the article to the end.

Microsoft Edge. This browser has replaced the rather boring Internet Explorer. By the way, the new program works very, very quickly. Moreover, it syncs your data with the cloud, so if you use your account on different devices, you do not have to carry bookmarks and remember passwords. There are also cons - so far this program does not support extensions, so if you need something other than Flash Player, you'll have to find something else.

Google Chrome. Today, this browser occupies a dominant position - it is popular, has a bunch of add-ons and works quite quickly on new PCs, however, if your computer is not very fast, it is better to give preference to the same Edge or Firefox, which we will talk about later. By the way, the popular Yandex.Browser, Amigo, Opera, Uran (pah-pah-pah), as well as many other browsers - are the same chrome, but with a different icon and a couple of additional bells and whistles of varying degrees of crappiness.

Firefox. The oldest of the browsers mentioned here. Fast, versatile and popular. Among the minuses, only the long time of the first launch can be noted, but after the start, it works fine even on old PCs. In addition, there are a huge number of extensions and themes for it, the number of which even exceeds that of chrome.

A wireless network adapter is a device that connects a PC to a wireless network. Many computers are equipped with a wireless network adapter. In order to find out about the presence of this element in your PC, you need:

click "Start" and select "Device Manager" (after entering it in search string);
open "Network adapters";
find the required network adapter.

There are various ways to disable and enable the network adapter in Windows 10, which we will describe below.

Network connections

Enter the command in the search bar control.exe /name Microsoft.NetworkAndSharingCenter- Enter (also "Start" - "Settings" - "Network and Internet" - "Status" - "Adapter Settings").
Click on "Change adapter settings" (on the left).
To disable the network adapter, select "Disable network device" (you can also right-click on the network connection, then on "Disable").

To connect the selected network adapter, you must click on "Turn on the network device" (you can also right-click on the network connection and then on "Enable").

Device Manager

You need to open the "Device Manager" (via command line or Win+R) and enter devmgmt.msc– Enter.
To disable the network adapter, you need to click on the "Network adapters" item, select the required one (with the right side of the mouse) and click on "Disable device", and then on "Yes".

To turn on the network adapter, we carry out a similar work, but in the end you need to click on "Turn on the device".

Team WMIC

You need to open the command line on behalf of the System Administrator (through the search box by entering cmd, then select "Run as administrator").
Next, you need to enter the command wmic nic get name, index and enter. Be sure to remember the index next to the name of the required network adapter.
To disable the network adapter, you need to register wmic path win32_networkadapter where index=2 call disable, at the same time, replacing the digital value highlighted in red with the index of the desired network adapter.

To enable the network adapter, you need to enter the command wmic path win32_networkadapter where index=2 call enable(do the same with the "red" number, as in paragraph 3).

Netsh Team

You need to open a command prompt as an administrator (enter cmd and selecting "Run as administrator").
Next, you need to enter netsh interface show interface+ Enter and remember the "Interface Name" of the network adapter to disable or enable.
To disable, enter the command netsh interface set interface "Ethernet" disable.

To enable the network adapter, you need to register the command netsh interface set interface "Ethernet" enable.

PowerShell

PowerShell must be run as a system administrator.
Next comes the command Get- NetAdapter | format- list+ Enter. You also need to remember the name of the one you need to turn off / on. network adapter.
Input is required to disable the network adapter Disable-NetAdapter -Name "Ethernet" -Confirm: $false.

To enable the network adapter, use the command Enable-NetAdapter -Name "Ethernet" -Confirm: $false.