Download the program to create a bootable flash drive windows 7. The program to create a bootable USB flash drive

Sadly for many, the era of CD/DVD drives is slowly but surely coming to an end... Today, users are increasingly thinking about having an emergency bootable flash drive if they suddenly have to reinstall the system.

And the point here is not only to pay tribute to fashion. OS from a flash drive is installed faster than from a disk; such a flash drive can be used on a computer where there is no CD / DVD drive (and USB is on all modern computers), and you should not forget about the ease of transfer either: a flash drive can easily fit in any pocket, unlike a disk.

1. What is needed to create a bootable flash drive?

1) The most important thing is a flash drive. For Windows 7, 8, you will need a flash drive with a size of at least 4 GB, preferably 8 (some images may not fit in 4 GB).

2) An image of a Windows boot disk, which is most often an ISO file. If you have an installation disk, then you can create such a file yourself. It is enough to use the program Clone CD, Alcohol 120%, UltraISO and others (see how to do this).

3) One of the programs for writing an image to a USB flash drive (they will be discussed below).

Important point! If your PC (netbook, laptop) has USB 3.0 in addition to USB 2.0, connect the USB flash drive during installation to the USB 2.0 port. This applies primarily to Windows 7 (and below), because. these OS do not support USB 3.0! An attempt to install will end with an OS error about the inability to read data from such media. By the way, they are quite easy to recognize, USB 3.0 is shown in blue, the connectors for it are the same color.

usb 3.0 on laptop

One more thing... Make sure your Bios supports booting from USB media. If the PC is modern, then it definitely should have this function. For example, my old home computer, bought back in 2003. can boot from USB. How configure bios to boot from a flash drive - .

2. Utilities for burning a bootable ISO disk to a USB flash drive

2.1 WinToFlash

I would like to dwell on this utility mainly because it allows you to burn bootable USB flash drives with Windows 2000, XP, Vista, 7, 8. Probably the most versatile! You can read about other functions and features on the official website. Here I also wanted to consider how you can create a USB flash drive in it to install the OS.

After starting the utility, by default, the wizard starts (see the screenshot below). To proceed to creating a bootable USB flash drive, click on the green checkmark in the center.

The process of transferring Windows system files usually takes 5-10 minutes. At this time, it is better not to load unnecessary resource-intensive PC processes.

If the recording was successful, the wizard will notify you about it. To start the installation, you need to insert the USB flash drive and restart the computer.

One of the best programs for working with ISO format images. It is possible to compress these images, create, unpack, etc. There are also functions for recording boot disks and flash drives (hard drives).

This program was mentioned quite often on the pages of the site, so here I will give only a couple of links:

2.3 USB/DVD Download Tool

A lightweight utility that allows you to burn flash drives with Windows 7 and 8. The only negative, perhaps, is that during recording it can give an error of 4 GB. flash drive, supposedly not enough space. Although there is enough space for other utilities, on the same flash drive, with the same image ...

By the way, the question of writing a bootable flash drive in this utility for Windows 8 was considered.

2.4 WinToBootic

Website: http://www.wintobootic.com/

A very simple utility that will help you create bootable USB media with Windows Vista/7/8/2008/2012 quickly and without worries. The program takes up very little space - less than 1 MB.

At the first start, it required the installed Net Framework 3.5, not everyone has such a package, but downloading and installing it is not a quick matter ...

But the process of creating bootable media is very fast and pleasant. First, insert the USB flash drive, then run the utility. Now click on the green arrow and specify the location of the image with the Windows installation disk. The program can directly record from an ISO image.

2.5 WinSetupFromUSB

Simple and main free program. With it, you can quickly create bootable media. By the way, interestingly, not only Windows, but also Gparted, SisLinux, built-in virtual machine, etc. can be placed on a flash drive.

To start creating a bootable USB flash drive, run the utility. By the way, please note that there is a special add-on for the x64 version!

Once launched, you only need to specify 2 things:

1. First - specify the flash drive to which the recording will be made. Usually, it is determined automatically. By the way, under the line with a flash drive there is a fad with a check mark: “Auto Format” - it is recommended to check the box and do not touch anything else.
2. In the "Add USB dick" section, select the line with the OS you need and check the box. Next, specify the location on the hard drive where the image with this ISO OS is located.
3. The last thing you do is press the "GO" button.

By the way! The program during recording may behave as if it is frozen. In fact, most of the time it works, just don't touch the PC for about 10 minutes. You can also pay attention to the lower part of the program window: messages about the recording process appear on the left and a green bar is visible ...

3. Conclusion

In this article, we looked at several ways to create bootable USB flash drives. Some tips for burning such flash drives:

1. First of all, copy all the files from the media, in case you need something later. During recording - all information from the flash drive will be deleted!
2. Do not load the computer with other processes during the recording process.
3. Wait for a successful informational message from the utilities with which you work with the flash drive.
4. Disable antiviruses before creating bootable media.
5. Do not edit the installation files on the flash drive after it has been burned.

That's all, all successful OS installation!

Hello dear readers or first-time guests, today we will talk about how to write an image to a flash drive, namely the ISO and IMG formats using portable programs. Who will do everything for you, you just need to choose the image itself!

How to easily write an image to a USB flash drive

First, let's talk about the popular ISO image, which is now used almost everywhere, especially its popularity on the Internet. To do this, download the program:

The program is free and portable, i.e. does not require installation, which is very convenient. You can bear it and she, from which very often. We start and see this window:

If you want to write the image to a blank flash drive, then .

Now I will explain how to write:

1. We choose that this is a disk image, i.e. our flash drive.

2 Select the image itself.

3. We indicate that this is not a hard drive, but a flash drive.

4. You may have another flash drive inserted, so we provide which one.

5. Click OK and after a while the recording will be successfully completed.

it the best program to write an image to a flash drive which I found.

After completion, a reboot is not required. We press exit. During the recording process, the program may offer to overwrite the file. We press yes.

How to burn an IMG image to a flash drive

We open and see a simple interface:

1. Select the image (There should be no Russian characters in the path, otherwise the program may swear).

2. Select the device (Before recording, it is advisable to format the device where you are going to record the image).

3. Press White and the image will be written.

Now it remains to store these programs and do write image to flash drive, well, or a link to my site, and you should not have such a problem.

If you want to create a bootable flash drive or write a distribution kit of some utility/program onto it, you need the appropriate software. This article will present some of the most convenient and easy-to-use programs and utilities. It remains only to choose the most suitable for yourself.

The first solution is an official program from Microsoft called Media Creation Tool. Its functionality is small, and all it can do is update the current version of Windows to the current 10ki and / or burn its image to a USB flash drive.

The advantage is that it will save you from searching for a clean and working image, thanks to the fact that it will write the official distribution kit to a USB drive.

Rufus

This is a more serious program that has all the necessary functions to create a full-fledged bootable USB media. First, Rufus suggests formatting before burning the distribution. Secondly, it carefully scans the flash drive for bad sectors so that you can replace the media if necessary. Thirdly, it offers two types of formatting: quick and full. Of course, the second will delete information more qualitatively.

Rufus supports all types of file systems and is portable. By the way, thanks to the possibility of Windows To Go, you can burn Windows 8, 8.1, 10 to a USB flash drive and run this system on any PC.

WinSetupFromUSB

The next solution is Win Setup From USB. Unlike the previous program, this utility is able to record several images at once, creating a multi-boot media.

Before you start using it, it offers to make a backup copy of all information on the media, as well as set up a boot menu. However, the utility is not Russified, and the menu through which the control takes place is quite complicated.

SARDU

This program will save you from having to search for the necessary distribution kits on the Internet, since you can select the ones you need right in its interface. She will download everything you need from official sites and write it to the desired media. The created image can be easily checked for performance through the built-in QEMU emulator, which was also not the case in previous software solutions.

There were some downsides as well. The fact is that most of the images can be downloaded via the SARDU interface for subsequent recording to media only after purchasing the PRO version, otherwise the choice is limited.

xboot

This program is easy to use. All that is required to get started is using the mouse to drag the necessary distributions to the main program window. There you can also categorize them and create a description for convenience. In the main window, you can see the total size of all distribution kits thrown into the program in order to select the media of the required volume.

As in the previous solution, you can download some images from the Internet directly through the XBut interface. The choice, of course, is small, but everything is free, unlike SARDU. The only disadvantage of the program is the lack of the Russian language.

Butler

This is a utility created by a Russian developer, which is not very different from previous solutions. With it, you can record several images and create unique names for them so as not to get confused.

The only thing that still distinguishes it from other similar programs is the ability to choose the design of the menu of your future bootable media, but you can also choose plain text mode. One bad thing is that Butler does not provide the ability to format a flash drive before recording.

UltraISO is a multifunctional program for burning images not only to a USB flash drive, but also to CDs. Unlike some previous programs and utilities, this one can create an image from an existing disk with a Windows distribution for later burning it to another medium.

Another good feature is creating an image from an operating system already installed on your hard drive. If you need to run a distribution but don't have time to write it down, there's a mount feature that lets you do it. In addition to all this, you can compress and convert images to other formats. The program has only one drawback: it is paid, but there is a trial version for the test.

UNetBootin

This is a simple and portable utility for writing images to a USB flash drive. As in some previous programs and utilities, the functionality of YunetButin is limited to writing an existing image to media and the ability to download the one you need from the Internet through its interface.

The main disadvantage of this solution is the inability to record several images at the same time on one drive.

PeToUSB

Another free portable utility for creating bootable media. Of its capabilities, it is worth noting the formatting of a USB drive before recording, which is clearly lacking in the same UNetBooting. However, the manufacturer has long ceased to support his offspring.

It is supported to write OS images to a USB flash drive with a capacity of no more than 4 GB, which will not be enough for all versions. In addition, the utility has not yet been Russified.

WinToFlash

The selection is completed by a functional program for burning images - WinToFlash. With it, you can record several distributions at once and create multi-boot media, unlike the same Rufus. As in UltraISO, through this program you can create and burn an image of an existing disk with a Windows distribution. It is also worth noting the function of preparing the media for recording - formatting and checking for bad sectors.

Among the features there is also the function of creating a bootable USB flash drive with MS-DOS. WinToFlash provides a separate item that allows you to create a LiveCD, which may be necessary, for example, to restore Windows. There are also paid versions of this program, but the functionality of the free version is quite enough to simply create a bootable USB flash drive or disk. In fact, WinToFlash has collected all the useful features of the previous software solutions that we have discussed above.

All the programs and utilities listed in this article allow you to create a bootable USB flash drive, and some even a CD. Some of them are modest in terms of functionality, while others offer a range of possibilities. You just need to choose the most suitable solution and download it.

In this article, I will tell you how to burn an image to a USB flash drive (in this case, a Windows image) for subsequent installation of the system on a computer. Nowadays, many people have laptops and netbooks where there is simply no optical drive, or there is no way to install windows from a disk, and here the creation of a bootable windows 7 flash drive comes to the rescue. First of all, this article is focused on these tasks.

We will write the image to a USB flash drive in two ways. The first method will be implemented using a very good ultra iso program, and the second using WinSetup From USB. We will start by considering the steps for working with ultra iso, since this method is less labor-intensive and the process of creating a bootable windows 7 flash drive will be quite fast. The second method will remain for those who, for some reason, “did not work out” with the first option.

Method number 1

So let's go. To get started, download the program Ultra ISO. After the program has been downloaded, installed and launched (we press the trial period if there is no desire to buy), you can begin the rather simple process of writing Windows to a USB flash drive:

1. You must specify the path to the image that should be placed on your hard drive:
Click "File" => Open (Fig. 1)

Fig.1

Rice. 2

Rice. 3

Method number 2

This method will also tell you how to write windows to a USB flash drive. What you need for this option:

1. A little free time;

2. Computer (with iron, which supports booting from a USB flash drive);

3. Program for preparing a flash drive ( download);

4. Actually the flash drive itself (even an SD card will do);

5. An image of the operating system we want to install.

For example, I will show how we will write an image of the operating system to a 4GB SD cardMicrosoft Windows 7Home Premium 64-bit. Immediately I want to draw your attention to the choice of operating system. If your computer has less than 4GB of RAM (RAM), then you should install the 32-bit (x86) version of the operating system, since the 64-bit one will simply clutter up the RAM with unnecessary processes.

We insert the USB flash drive into the USB port and format it in FAT32 or NTFS using Windows tools. To do this, go to My Computer, find the flash drive there and right-click on its icon. In the context menu, select the "Format ..." item. In the format window, select the FAT32 or NTFS file system (the latter will be better if the flash drive is larger than 4GB), and also select the cluster size "Standard cluster size" and click the "Start" button. Everything is shown in the picture:

Next, we download a small program in which we will do all the operations we need. There are several programs of this type, but I chose WinSetupFromUSB because it does not require installation, it almost does not take up space on disk and easy to use.

We start the program. First, we need to select the device on which we will write the image. This is done in the drop-down menu at the top (if the flash drive is not displayed in this menu, click on the Refresh button). Next, we need to prepare the flash drive for burning the image, because if we just copy the image, it will be impossible to enter the system installer, because there is no boot sector. To create it, click on the Bootice button.

In the Bootice utility window that opens, press the Process MBR button, then see if Grub4Dos is checked (if not, check it) and press the Install / Config button. In the Config Grub for DOS window, click on the "Save to disk" button, the program will display a window that the boot record has been successfully written to the drive.

We return again to the Bootice utility window, where we press the “Process PBR” button and do the same, without changing anything in the last window, click OK.

Everything, now we just have to write the image to a USB flash drive, this is done in the main program window, which we saw immediately upon startup. It is necessary to put the necessary checkmark in it - if you are going to install Windows XP, then this is the first checkbox, if Vista or Seven - the second. Next, click on the “…” button on the other side of the checkmark and set the path where our unpacked image is stored on the hard drive, or simply mounted into a virtual drive using DaemonTools or Alcohol. Click on the "GO" button and wait until the process is completed.

At the end of the program will display the message "Job Done!". All, dear friends, you can reboot and start installing the operating system.

Also, I advise you to read the article on

Modern laptop computers are increasingly not equipped with a CD-ROM drive. Especially often the lack of a drive can be observed on netbooks and ultrabooks. On the one hand, the absence of a drive makes it possible to make a portable computer much lighter and thinner, but on the other hand, this creates a number of inconveniences in the operation of such a device. For example, to install an operating system, the user will need to create it yourself. In this article, we will walk you through how to write an operating system image to a USB flash drive via UltraISO, thus creating a bootable USB flash drive.

Step # 1. Load the image into the UltraISO program.

In order to write an image to a USB flash drive via, this image must first be loaded into the program. To do this, launch UltraISO and open the "File" menu. Here you need to select the "Open" item, and then select your ISO file. You can also just press the key combination Ctrl+O.

Next, a standard window for opening files will appear. With this window you need to select . The UltraISO program supports all possible disk image formats, so you don't have to worry that your image will not open.

After you have selected the one you need through the "File - Open" menu, files from this disk image will appear in the UltraISO program window.

There is no need to do anything with files that have been loaded from the disk image. Otherwise, you will corrupt the boot image and the bootable flash drive you created will not work.

Step number 2. We connect the USB flash drive and start recording the disk image.

After connecting the USB flash drive, we return to the UltraISO program and open the "Boot" menu. Here you need to select the item "Burn image of the Hard disk".

After that, the disc burning window should open. In this window, you need to select the USB flash drive on which you want to burn the disk image, and click on the "Burn" button.

Step number 3. We are waiting for the end of writing the image to the USB flash drive.

Everything, now it remains to wait until the UltraISO program writes the disk image to a USB flash drive. The recording process may take several minutes.

After the recording is completed, you will receive a bootable USB flash drive. In order to install the operating system with it, you will need to enter the BIOS and enable booting from flash drives there.