Kenwood tk f6 turbo programming. Kenwood TK-F6 Turbo is a high power portable radio. Charging process and indicator status

Kenwood TK-F6 Turbo is a wearable professional walkie-talkie that is a reliable communication tool in a rugged, ergonomic case without a display for greater reliability when working in difficult conditions. New TK-F6 Turbo programmable in frequency range 400-480 MHz and equipped with a battery Li-Ion with high capacity 3000 mAh. The radio has 128 memory channels (8 groups of 16 channels), function buttons for accessing frequently used functions, LED operating status indicator.

• Using the software and programmers KPG-22 COM or KPG-22/4 COM, the extensive functionality of the radio station is configured. The radio does not have a display, but this does not underestimate its capabilities, since many functions are controlled very quickly using the function buttons. For example, the side keys can be assigned to check the battery charge, change the microphone sensitivity level, change the output power, scan, monitor, and much more.
• All buttons located on the body of the radio have 3 modes of operation: short-term pressing, pressing with a delay, long pressing for more than 3 seconds. TK-F6 Turbo is able to transmit an emergency signal to your colleagues, as well as turn on a loud siren to attract attention in an emergency, with one press of the orange button on the top of the walkie-talkie.

  TK F6 Turbo allows you to set a password for reading data from the radio. Thanks to this feature, you can protect information about your channels for them to be read and changed from your computer by unauthorized persons. TK-F6 Turbo manufactured using a high-quality aluminum chassis, and its body is a reliable design without backlash from a durable modern polymer material. Due to the high quality of the assembly, the durability of the device is ensured.

• walkie-talkie Kenwood TK-F6 Turbo equipped with a scrambler to change the audio signal, which allows you to ensure the confidentiality of conversations by encrypting the signal. It is also possible to increase the sensitivity of the microphone, so you can transmit information even in a whisper. All settings Kenwood TK-F6 Turbo can be done using a regular computer. For the convenience of working with the radio, any actions are voiced by voice prompts (on English language).
• Main technical characteristics:

  frequency range

  400-480 MHz

  Number of channels

  16

  Channel Width

  Wide: 25 kHz Narrow: 12.5 kHz

  Frequency grid step

  25 kHz, 12.5 kHz, 5 kHz, 6.25 kHz

  Supply voltage

  7.2VDC±20%

  Working hours

  Cycle (pr./trans./dej.): 3-3-40 hours

  Modulation type

  FM

  Operating temperature range

  -30…+60 °С

  Antenna impedance

  50 ohm

  Frequency stability

  ± 2.5 ppm (-30 °C to + 60 °C)

  Synth step

  5.0 kHz/6.25 kHz

  Dimensions (W x H x D)

  Only radio with battery: 99x58x34mm.

  Weight

  198 g

  Transmitter

  output power

  8 W

  Radiation type

  F3E

  Modulation Width

  ± 5.0 kHz at 25 kHz ± 2.5 kHz at 12.5 kHz

  Out-of-band emissions (EN)

  -36 dBm? 1 GHz -30 dBm > 1 GHz

  FM Noise (EIA)

  45 dB at 25 kHz 40 dB at 12.5 kHz

  distortion

  less than 5%

  Microphone impedance

  2000 ohm

  Receiver

  Receiver type

  Double conversion superheterodyne

  Sensitivity - EIA 12 dB SINAD

  0.22 µV at 25 kHz 0.25 µV at 12.5 kHz

  Selectivity

  70 dB at 25 kHz 62 dB at 12.5 kHz

  Intermodulation

  65 dB

  Selectivity

  70 dB

  Audio output power

  500mW with less than 10% distortion

Professional walkie-talkie TK-F6 LPD qualitatively combines compact size, light weight and long communication range. Through the use of modern Japanese sound processor DSP, the walkie-talkie has high sound quality and eavesdropping protection function. The radio is designed for intensive use in difficult conditions.
Full license-free LPD version.

• High transmitter power up to 8 watts. Provides maximum communication range in difficult conditions.
• High capacity lithium battery 1800mAh
• Battery saving function. Allows you to significantly increase the time of the radio without recharging.
• Function of voice control of level of a charge of the accumulator.
  When you press the button, the radio announces the charge level by voice.
• Listen protection function.
• VOX function(switch on voice transmission).
• Whisper function. Increases microphone sensitivity.
  Turns on and off with the push of a button.
• Quiet sound transmission function, for a whisper or a sound from far away.
• Channel scan function. Allows you to automatically listen to a specified number of channels.
• Alarm button. When held, activates the siren.
• High compatibility. Wide frequency range, support for subtones. Support for all license-free bands.
• Support PTT ID, DTMF
• Possibility of separation of frequencies of reception and transmission.
• Moisture protection according to the IP54 standard (splash protection).
• Military grade impact protection MIL-810C/D/E/F.
• Durable and lightweight magnesium alloy chassis.

Attention! Other versions of the TK-F6 radio are programmed to frequencies that are prohibited for unlicensed use. Some of the optional functions (Voice Encryption, Whisper, VOX) do not work in other versions.
Be careful when choosing radios!

Button functions:
Switching of all functions is accompanied by voice confirmation in English.
Top red button:
Short press - Turn on / off the whisper function.
Long press - Alarm function, siren.
Side button 1:
Short press - Disable / Enable noise reduction.
Long press - Enable / Disable the VOX function.
Side button 2:
Short press - Check battery level. low, mid, high
Long press - Enable / Disable voice encryption. Scrambler.

programming.

CTCSS/DCS encoding/decoding. When this feature is enabled, you can hear and receive

calls, only when codes match CTCSS/DCS. Calls to stations, even those operating on the same channel,

other code values ​​or no encoding at all, you will not accept.

Exists 50 tone code values CTCSS (67.0 - 254.1Hz). At the same time, it is possible to independently

define these encodings in the interval 50-260Hz step by step 0.1Hz.

Exists 232 digital code DCS (017N - 765L).

Optional DTMF signal. It is possible to define a DTMF signal for each channel by

programming.

This function is similar to coding CTCSS/DCS and implements functions such as: selective call,

group call, PTT ID, remote disable and enable.

1. PTT ID

: If the channel is set to PTT ID, this information will be transmitted when working on

channel when pressed and released PTT. Stations having the same function and display will be

display this PTT ID(caller ID) when receiving a call.

Through programming, you can create groups and organize group calls according to a pattern

symbols A, B, C, D, “*”, “#”).

The caller can now call different groups by passing different group

codes. When the receiving party receives ID code, one or all characters of the code are compared with

a pattern based on which the call is or is not answered. Thus,

group or selective calls.

Group code: C.

ID code :

C23, stations will answer RADIO A And RADIO B.

If the caller uses the code when calling CC5, stations will answer RADIO C And RADIO D.

If the caller uses the code when calling CCC, all stations will answer.

The radio has 16 groups DTMF codes that can be programmed and used quite flexibly.

Sets the combination of CTCSS/DCS and DTMF signals.

You can set the signal combination logic CTCSS/DCS And DTMF(by programming).

: The station only answers incoming calls if it matches and codes CTCSS/DCS and signal

: The station answers incoming calls when any of these signals match.

Transmission Time Limit (TOT). The purpose of this feature is to limit the continuous transmission time to

channel (prevents rapid battery discharge and possible overheating of the output stage). At

exceeding a predetermined time, the station will turn off the transmission and notify with a sound signal.

The function itself T.O.T. And maximum time transfer jobs are set by programming.

This feature can be configured by programming.

Power saving mode (Battery Save Setup). When enabled, the station will decrease

power consumption in the "idle" state: no signal is received, no

actions, etc.

Extension frequency range(Frequency Band Expand). By programming frequency

radio range can be extended to interval 400 - 520 MHz.

On off. Reset Functions (Reset Function On/Off). Can be enabled/disabled by programming

function usage reset, which allows you to restore the factory settings of the device.

Restoring factory settings (Resume Factory Default). Restore factory settings has

meaning when the station starts to work inadequately, etc. To do this, with the radio turned off, press and

hold buttons PTT And PF2 more than 3 seconds, then release. A sign of factory recovery

settings will display the current channel number.

Note: The feature must be enabled by programming. See prev. paragraph.

Kenwood TK-F6 Turbo VHF- a portable radio station with rich functionality. Various frequently used functions can be assigned to the control buttons, such as changing the power, microphone sensitivity, scanning control, and others. Three functions can be assigned to each of the buttons, with short and long presses, as well as when pressed with a delay. The radio is programmed with personal computer, for which there is an appropriate software. A password can be set to read data from the radio. There is a scrambler function that provides encryption of the voice signal and the confidentiality of communication over the radio.

The radio does not have a display and has a minimum number of controls, which increases the reliability of the body, which has a high strength. The Kenwood TK-F6 Turbo VHF material is a polymer based aluminum chassis that creates a robust construction with no play and appearance The case is very aesthetic. There is a channel scan function, including priority. The station notifies about operating states by voice signals.

The main advantages of Kenwood TK-F6 Turbo VHF:

• frequency range of the radio station - 136 - 174 MHz;
• the number of memory channels - 128, divided into eight groups;
• output power - two levels up to 9 W;
• the battery is used lithium-ion, with a capacity of 3000 mAh;
• there is an alarm button that turns on the siren and transmits an alarm signal;
• there is a jack for connecting a Kenwood type headset;
• distance of high-quality communication - up to 10 kilometers.

Kenwood TK-F6 Turbo VHF radios are used by anyone who needs reliable radio communication between workers who are remote from each other: in the forest, at a construction site, during installation work, logistics management, when patrolling an object with security structures.

New powerful professional portable radio operating in the range (400-480 MHz), compact size, new modern design, with output power up to 9 W!

High sensitivity transceivers, allowing you to get exceptional clean radio communication at the maximum range.

A large and high-quality speaker provides clear audibility even at maximum volume without distortion. Extensive functionality can satisfy the needs of almost any user, while all the extensive functionality is hidden inside the station, most of the functions are programmed via a computer, the necessary functions can be displayed on two programmable buttons, otherwise nothing more!

We present to your attention an ultra-technological, multifunctional, compact, professional portable radio with a powerful LI-ION (lithium) battery 3000 mAh - Kenwood TK-F6 TURBO

Kenwood TK-F6 TURBO is a new professional portable radio with a high performance antenna that is easy to bend. Highly durable lightweight case with modern design and output power up to 9 W in the range of 400-480 MHz. Thanks to continuous technology improvements and full compliance with eleven military standards MIL-STD 810 C / D / E / F and IP 54/55, the radio is able to work in harsh conditions: rain, fog, low and high temperatures, vibration. Allows you to receive even the weakest signals, at a low price it puts this model to the leading positions among professional wearable walkie-talkies of this class!

Wearable walkie-talkie kenwood TK-F6 TURBO provides a longer range, compared to other models, due to better sensitivity and selectivity up to 3-7 km in a city or in a forest, up to 10-12 km in a field.
Due to improved selectivity, the receiver works better in difficult conditions in crowded places a large number people with radio stations of this frequency range. For example: a large enterprise, a large construction site, warehouses, a shopping center, a boarding house, etc.

Main functionalities:

• Operating frequency range 400-480 MHz
  Includes the entire LPD band 433.075-434.775 MHz, as well as PMR 446.0-446.1 MHz, FRS/GMRS 462-467 MHz.
• СTCSS and DCS codes - make it possible to combine with any LPD, PMR and professional radio station.
  
• Polling the state of charge of the battery 10 values (allows you to get information about the current state of battery charge) now even the absence of a display will not prevent you from getting information about the level of battery charge! .
  
• Missed call (Call Remind). Remind you if you missed a call from a correspondent
  
• DTMF
• Power regulation 1/8 MAX 9W (2 modes)
  
• 2 programmable buttons for quick access to frequently used functions (for example, set one button to low power mode to save battery, the second emergency call)
  
• Compliance with eleven military standards MIL-STD 810 C / D / E / F and IP 54/55 (ability to work in harsh conditions: rain, fog, low and high temperatures, vibration, etc.)
  
• Turn off noise reduction
  
• 3-color indicator (red, orange, green)
  
• Frequency step 12.5, 25 kHz 2 settings
  
• VOX - turn on the radio for voice transmission. (9 values)
  
• VOX Delay Time - setting the switching delay.
  
• VOX Beep - notification of the user about the enabled VOX mode (switching on for voice transmission).
  
• SQL - Configurable squelch modes (9 levels)
  
• Channel scanning. Allows you to monitor activity on other communication channels and, if necessary, respond to it
  
• Quick battery charge with indication of the end of the charge (6 hours).
  
• Battery saving mode.
  
• Sound call.
  
• Selective call function (SelCall Function).
  
• Emergency Alarm Function
  
• PC programming.
• Button lock.
• 128 channels. (8 groups of 16 channels)
• Restoring factory settings!
  
• Speech Improvement System (COMPANDER)!
  
• Talk back function.
• Talk around feature.
• Voice confirmation of channel switching (can be disabled).
• Limitation of the transmission time (from 15 to 600 seconds).
• Automatic transmission of caller ID (PTT ID.)
• Keyboard lock.
• operating temperature range -20/60°С.
• dimensions 120x64x48 mm (H W D).
• weight 267gr.