How to burn a system from a disk to a USB flash drive. How to transfer the necessary information from a CD or DVD to a USB flash drive. Possible problems and malfunctions

For problems in Windows 7, it is not always possible to reinstall the operating system from a disk. The reason for this may be the lack of a drive or its failure. Since disk drives are used less and less now, people are in no hurry to repair or replace them with new ones. Therefore, there must be an alternative download option, and you can carry it out from a USB flash drive.

Beginners try to copy the contents of the boot disk to a USB drive or transfer a disk image with distributions there, but they do not succeed. After copying files and folders, the computer does not try to install Windows 7. No wonder, because the flash drive must be bootable so that the operating system distribution kit can be installed from it. You can create a bootable USB drive using third party applications or the built-in Windows 7 utility.

Using the built-in disk utility

This is the most difficult way, but it does not require downloading and installation. third party programs. In order to start working with a flash drive, you need:

Open the start menu.
Click on "Run" (you can also press Win+R instead).
In the window that opens, write "cmd" (do not write quotes).
Click on "OK".

In the command prompt window that appears, type "diskpart" and press "Enter". It should be remembered that the USB flash drive must be connected to the computer before all these procedures are carried out. After calling this command, the window should look like this:

The computer name is underlined in the screenshot. In your case, this place should be the name of your computer.

Now you need to display a list of disks connected to the computer. This is done with the "list disk" command. By entering the command and pressing "Enter", you can see a list of disks.

You will determine the flash drive by its volume. In this case, this is disk 1. Before continuing, you need to make sure that the selected device is a USB flash drive, otherwise you can mistakenly delete information on another disk. Next, you need to select a disk. In this example, the command will look like "select disk 1", but instead of one, you must enter the number of your flash drive. After entering the command and pressing "Enter", a line will be displayed confirming that the disk is selected.

To clean a removable disk, use the "clean" command.

Windows 7 should now create a new partition on the selected drive. This is done with the “create partition primary” command.

The new partition must first be selected, made active, and then formatted. This is done with the commands:

To select - "select partition 1".
Make active - "active".
For formatting - "format fs=NTFS" (NTFS file system).

After formatting is completed, you need to assign a letter to the flash drive. This is done with the "assign" command. You should not specify the letter itself, it will be determined automatically by the system.

The utility must be terminated with the “exit” command.

After the actions taken, the removable disk became bootable. If you open it through File Explorer, you won't notice any changes. but now you can install Windows 7 from such a disk. To do this, copy the operating system distribution kit from the DVD to a USB flash drive. You don't need to create any images. Simply copy files and folders. By connecting a removable drive to the computer before turning it on, you can install Windows 7 from it. The main thing is not to forget to set the boot from a USB drive in the BIOS settings.

Those who find it difficult to work with the command line can use third-party applications to create a disk image with the distribution on a flash drive.

Working with UltraISO

The Ultraiso application is designed to work with disks and their images. It is paid, but with a trial period. This period is enough to create a boot disk for yourself. However, to work with the application, you need to create a disk image with the distribution kit in *.iso format. If you already have such an image, you can use it. If it is not available, you should create an image in any application for this purpose for Windows 7 or in Ultraiso itself.

To create an image in Ultraiso there is special button which can be seen in the screenshot:

Also, to perform this action, you can go to the "Tools" menu and select "Create a CD image ..." or press the F8 key. In the window that appears, you need to:

select drive;
specify the folder for saving the image;
mark the output format (ISO);
click the "Make" button.

The process of creating an image of the Windows 7 distribution kit will begin.

After its completion required file will be in the specified folder.

Now we need:

go to the menu "File" - "Open";
find a file with an image;
press the "Open" button.

Before that, you need to remember to connect the USB flash drive. Next, go to the menu "Boot" - "Burn hard disk image ...".

In the window that appears, click the "Format" button, and after formatting is completed, click the "Record" button.

After recording on a removable disk, it will be possible to detect files and folders of the Windows 7 distribution. If they were copied there in the usual way, the flash drive would not become bootable, and it would be impossible to install the operating system from it. But now it's easy to do by connecting the device to the desired computer.

Working with UNetbootin

Unetbootin is another application with which you can create a bootable USB flash drive with the Windows 7 distribution. After running the program, you need to:

Check "Disk Image".
Specify the path to the folder in which it is located.
Press "OK".

You should wait until the image is written to the USB flash drive. After that, you can test it in practice by trying to install Windows 7 from it.

You can find many other utilities designed to install Windows 7 distributions on flash drives. However, you should not download all these applications. The described three methods are enough to create a bootable USB flash drive. They have been field tested and have no complaints. Most third party apps are good way"reward" your computer with some kind of virus. By using them, you will acquire additional problems with the software.

Greetings, dear readers! When installing a new operating system on a computer, it will be enough to open the DVD drive, then install the installation distribution and perform some operations in the BIOS (you can read about what BIOS is here), you can begin to complete the task.

However, what if the installation of the operating system needs to be performed on so-called portable netbooks or laptops, which, as you probably know, do not have a disk reader. In this case, the installation of the operating system is carried out from a USB drive.

The installation of windows from a USB flash drive itself is no different from installing from a disk, however, the recording process itself installation distribution on a flash drive has some features. In this article, we will look at how to burn windows 7 to a USB flash drive in several ways. It should be noted here that in addition to writing the windows distribution to a USB flash drive, it can also be written to a memory card, but not all laptops have the ability to boot from a memory card. Therefore, before creating a bootable flash drive or memory card, you should make sure that your laptop or netbook is able to boot from the memory card. And how exactly to check you can find out by reading my article:

What is a computer BIOS and how to configure it

In fact, installing windows from a flash drive is no different from installing from a regular DVD.

I How to create bootable flash media

So, the first method that we will consider with you is installation using command line. This means that by specifying special commands, we will create a bootable removable media. But first, we need a flash drive with a capacity of at least 4 GB. This method is, I would say, the most difficult for beginners, since you will have to sequentially enter commands that are not entirely familiar to novice users. Therefore, do not be afraid of these unfamiliar commands, the purpose of each team is described by me below.

1. We connect the USB flash drive to the computer, and then click on start and select the "Run" command. At the command prompt, you will need to enter cmd.exe and click OK. In this case, the command must be run as an administrator.

2. In the window that opens, you will need to type "diskpart" to open the disk management utility. After the utility appears, you need to type the “list disk” command, which allows you to view a list of used disks on your PC. You will need to select your flash drive. Let's say in my example - this is disk 1. So, we write "select disc 1". Thus, we indicate that all actions performed in the future will be performed with this disk.

3. In the next step, we will need to clean up the flash drive that will be written to. Type the "clean" command.

4. After the message “Disk cleanup completed successfully”, the next step is to create a new partition by issuing the “create partition primary” command. Here we indicate to the system that in the future we will work with this particular partition - “select partition 1”.

5. In order to select this section as active, set the “active” command.

6. Then, in the next step, you will need to format the partition we created on the flash drive in the NTFS file system - “format fs = NTFS”.

7. After the formatting of the flash drive is completed (100%), you will need to activate the process of connecting the device by specifying the “assign letter = Z” command and pressing “Enter”.

8. Then after the message "connection succeeded" appears, type "Exit" to exit diskpart to the command prompt.

E - Disk partition in which the windows distribution is present;

Z - Designation of the USB drive.

The copying process itself takes about 50 minutes. After the copying is completed, all that remains is to restart the computer and enter the BIOS. And then by setting the appropriate settings in the BIOS, it will be possible to proceed with the installation of the operating system.

II How to create bootable flash media

Consider the second way how to burn windows 7 to a USB flash drive. The essence of this method is that to create a bootable USB flash drive, we need the UltraISO program, with which we will create a bootable removable media with the windows 7 operating system.

If you do not have installed this program, then you can download it from the Internet, and it is distributed on a paid basis. However, you can use the demo version of this program and use this program during the trial period.

So, open the program and click "File - open".

In the window that opens, you will need to go to the image of the operating system and click "Open". We will discuss what an image is and how to create it in one of the future lessons. By the way, let me remind you that various contests and tournaments are held on the blog, participate and win cash prizes. In order for you to have a better chance of becoming a WINNER, you should Subscribe to blog updates so as not to miss new articles. You can read about how to properly subscribe to blog updates by clicking on this link.

Then, in the top menu, click "Boot" and select "Burn hard disk image" in the drop-down menu.

Therefore, before formatting, copy important data to your HDD.

After formatting is successfully completed, click "Write".

For a certain time, the image will be written to a USB flash drive or memory card. This method is the simplest compared to the first method.

In general, in addition to the above methods for creating bootable flash media, there are also various other methods. For example, to write the windows distribution to a memory card or flash drive, use a utility called WinToFlash.

Plus, I suggest you also watch a live video:

The essence of this utility is similar to the previously discussed UltraIso program. That is, open the program, specify the path for the location of the windows distribution image, copy and write. What methods of creating a bootable flash drive do you know? In addition, I recommend that you read the article, installing windows 7 on a computer. From this article you will learn how to install the operating system correctly. windows system 7.

Having considered in this article the question of how to burn windows 7 to a USB flash drive, you can thereby independently reinstall the operating system on your netbook or laptop using a flash drive.

With this, I will end this article. I hope the material was useful and interesting for you.

In the next article I will tell you => How I won in one competition in Chelyabinsk in the Nomination ...

Dear users, if after reading this article you have any questions or want to add something regarding the subject of this article or the entire Internet resource as a whole, then you can use the comment form. Also ask your questions, suggestions, wishes ..

So, for today, this is actually all that I wanted to tell you about in today's issue. I can only hope that you have found interesting and useful information in this article. Well, I, in turn, am waiting for your questions, wishes or suggestions regarding this article or the entire site as a whole ==>

temowind.ru

How to burn windows to a USB flash drive for installation (bootable)

In this article, I will tell you how to write an image to a USB flash drive (in this case, a windows image) for subsequent installation of the system on a computer. Nowadays, many people have laptops and netbooks where there is simply no optical drive, or there is no way to install windows from a disk, and here the creation of a bootable windows 7 flash drive comes to the rescue. First of all, this article is focused on these tasks.

We will write the image to a USB flash drive in two ways. The first method will be implemented using a very good ultra iso program, and the second using WinSetup From USB. We will start by considering the steps for working with ultra iso, since this method less labor-intensive and the process of creating a bootable windows 7 flash drive will be quite fast. The second method will remain for those who, for some reason, “did not work out” with the first option.

Method number 1

So let's go. First, download the Ultra ISO program. After the program has been downloaded, installed and launched (we press the trial period if there is no desire to buy), you can start a fairly simple process of writing Windows to a USB flash drive:

1. You must specify the path to the image that should be placed on your hard drive: Click "File" => Open (Fig. 1)

2. Then, select: Boot => Write an image of the Hard disk (Fig. 2)

Method number 2

This method will also tell you how to burn windows to a USB flash drive. What you need for this option:

1. Some free time;

2. Computer (with hardware that supports booting from a USB flash drive);

3. Program for preparing a flash drive (download);

4. Actually the flash drive itself (even an SD card will do);

5. An image of the operating system that we want to install.

For example, I will show how we will write an image of the operating system to a 4GB SD card Microsoft Windows 7 Home Premium 64-bit. Immediately I want to draw your attention to the choice of operating system. If your computer has less than 4GB of RAM (RAM), then you should install the 32-bit (x86) version of the operating system, since the 64-bit one will simply clutter RAM redundant processes.

Insert flash drive into USB port and format it in FAT32 or NTFS using windows. To do this, go to My Computer, find the flash drive there and right-click on its icon. In the context menu, select the "Format ..." item. In the format window, select the FAT32 or NTFS file system (the latter will be better if the flash drive is larger than 4GB), and also select the cluster size "Standard cluster size" and click the "Start" button. Everything is shown in the picture:

Next, we download a small program in which we will do all the operations we need. There are several programs of this type, but I chose WinSetupFromUSB because it does not require installation, takes up almost no disk space, and is easy to use.

We start the program. First, we need to select the device on which we will write the image. This is done in the drop-down menu at the top (if the flash drive is not displayed in this menu, click on the Refresh button). Next, we need to prepare the flash drive for burning the image, because if we just copy the image, it will be impossible to enter the system installer, because there is no boot sector. To create it, click on the Bootice button.

In the Bootice utility window that opens, press the Process MBR button, then see if Grub4Dos is checked (if not, check it) and press the Install / Config button. In the Config Grub for DOS window, click on the "Save to disk" button, the program will display a window that the boot record has been successfully written to the drive.

We return again to the Bootice utility window, where we press the “Process PBR” button and do the same, without changing anything in the last window, click OK.

Everything, now we just have to write the image to a USB flash drive, this is done in the main program window, which we saw immediately upon startup. It is necessary to put the necessary checkmark in it - if you are going to install windows XP, then this is the first checkbox, if Vista or Seven - the second. Next, click on the “…” button on the other side of the checkmark and set the path where our unpacked image is stored on the hard drive, or simply mounted into a virtual drive using DaemonTools or Alcohol. Click on the "GO" button and wait until the process is completed.

At the end of the program will display the message "Job Done!". All, dear friends, you can reboot and start installing the operating system.

Also, I advise you to read the article on

operating system optimization.

we-it.net

How to burn windows 7 to a flash drive

Many users at least once faced with the need to install or reinstall the operating system. Installing the OS on a computer can be done using a disk or using a flash drive. The second method is used more and more often due to the clear speed advantage (the installation process is 2-3 times faster than using an optical disc). That is why we want to talk about how to burn windows 7 to a USB flash drive.

There is enough a large number of ways to write an operating system to a USB flash drive. We want to pay attention only to those ways by which you can burn windows 7 to a USB flash drive quickly, simply, and most importantly, safely for your computer. In some cases, you will have to use additional programs, but they are completely free and available for free download (in some cases we will use a free trial period).

How to burn windows 7 to a USB flash drive using UltraISO

This method is very popular among users. To use it you will need:

UltraISO program
Perseverance and a little patience

We draw your attention to the fact that full version UltraISO program is paid. However, you can safely use the trial period, which lasts 30 days. During this time, you can use all the functions of the program absolutely free. After downloading, install the program on your computer, this process will not cause you any questions.

We insert the USB flash drive into the computer and run the UltraISO program. After launch, a welcome window should appear, in which we need to select the “Trial period ...” mode.

We select the already prepared ISO image of windows 7 and click “Open”.

After that, go to the "Boot" section and select the item "Burn image hard drive...”.

In the “Recording Method” field, select the “USB-HDD” item. We select our flash drive and click the “Format” button (note that this will delete all data from the drive).

After launching the formatting utility, a window will appear in which you need to select the formatting options for the flash drive. In the "File system" section, select "NTFS" and click "Start".

In the warning that appears, click “OK”.

After successful formatting, a corresponding window will appear.

We close the formatting window using the “Close” button and proceed to the direct solution of the problem of how to burn windows 7 to a USB flash drive. To start recording, click the "Record" button.

The process of writing the operating system to the USB drive will begin. You will be able to track the recording speed, the remaining time until the end of the recording, the total percentage of files already recorded.

After graduation windows records 7 the message “Recording completed!” will appear on the flash drive. You can safely close the program and use the ready-made bootable flash drive to install the operating system on your computer.

How to burn windows 7 to flash drive using windows 7 USB/DVD Download Tool

This program is highly functional and is intended only for burning an ISO image of the operating system to a USB drive or optical drive. This product does not have other features, but in this situation we do not need them.

To write windows 7 to a USB flash drive, you will need:

Installed windows 7 USB/DVD Download Tool
Windows 7 disk image in .iso format
Flash media with a minimum of 4 GB of memory

The program that we will use is absolutely free. You can download it from this link. Installing this software product does not differ in anything special from the installation of other programs and should not cause you any difficulties.

Insert the flash drive into the computer and start in advance installed program windows 7 USB/DVD Download Tool. In the window that appears, click “Browse” to select the distribution of the operating system.

Select the desired windows 7 image and click "Open".

After you have selected the prepared operating system image, click “Next”.

At this step, writing windows 7 to a USB flash drive, the program provides the user with a choice of media (“USB device” - the recording will be made on a USB flash drive, “DVD” - on an optical disc). Select the "USB device" option.

In a special window, select the flash drive on which you want to burn windows 7 and click the “Begin copying” button to start the process.

In the window that appears, confirm the need to clean the flash drive and click “Erase USB Device”.

After that, the recording process will begin. A percentage indicator will show the recording status.

After the completion of writing windows 7 to the USB flash drive, the message “Status: Backup completed” will appear under the percentage scale. Close the program and use the resulting bootable USB flash drive for your own purposes.

How to burn windows 7 to a flash drive using WinSetupFromUSB

In front of you very effective software solution, which will help create a bootable windows 7 flash drive. In terms of complexity, this method is somewhat more complicated than the previous two, but, nevertheless, some users choose it.

You will need:

WinSetupFromUSB program
DaemonTools or Alcohol disk mounter
Image windows disk 7 in .iso format
Flash media with a minimum of 4 GB of memory

The program that we will use is absolutely free. You can download WinSetupFromUSB from this link. The installation of this software product is no different from the installation of other programs and should not cause you any difficulties.

Run the program (best as an administrator), while the flash drive must be already connected to the computer. In the "USB disk selection and format" field, you must select your USB flash drive. After that, click the “RMPrepUSB” button.

In the window that appears, under " boot sector” set the selector to “WinPEv2/WinPEv3/Vista/Win7 bootable (CC4)”. In the “File system and Options” section, set the selector in front of the “NTFS” item and check the box in front of the “Boot as HDD (C: 2PTNS)” item. After that, click the “Prepare disk” button.

In all warnings that appear, click "OK". After that, a Dos window should appear, which does not need to be closed, it will close automatically.

After closing the Dos window, click the “Exit” button. With the help of a tick, it is necessary to mark the item “Vista / 7 / Server 2008 - Setup / PE / RecoveryISO” and then click on the rectangle to the right of it.

In a special window, specify the previously downloaded ISO image of windows 7 and click "OK".

Press the “GO” button to start the process of burning windows 7 to a USB flash drive. When finished, the message “Job done” will appear.

conclusions

We have examined in detail three effective ways on how to burn windows 7 to a USB flash drive. Using the proposed methods, you can record to removable flash media and other operating systems. The first two ways to create a working bootable flash drive are simple and convenient, the third way is more laborious, so we recommend that inexperienced users use the UltraISO and windows 7 USB / DVD Download Tool programs.

computer-info.ru

How to transfer the necessary information from a CD or DVD to a USB flash drive

Hello, dear visitors of the Start-Luck blog. Some readers remember those times when we shared our videotapes, CDs, books and then lost them in obscurity, forgetting which bad friend took "our charm".

For modern people this is such a rarity. Digital options include recording and re-recording. Even if you want to give something to someone, you can always make a copy with peace of mind and not worry about whether the information will be returned to you or not. It will remain at hand. This is what we will talk about today.

In this article, I will tell you how to transfer from disk to a USB flash drive in a simple way and using an ISO image. I will work on windows 7, although in fact it is not so important. The steps won't be much different no matter which version you're using.

And, of course, we will not do without video instructions, which will resolve any misunderstanding between me and those who are thirsty for information.

I think we can start now.

Easy way without software

So, first of all, open the "My Computer" section. Then you need to insert your CD or DVD into the drive.

Some laptops do not have a dedicated disk drive. What to do in this case? I think that you already know the answer to this question and have used ISO boot disks more than once. It should be yours now.

If this is the first time you have encountered this problem, then I will explain. You need to mount the image, I already told you how to do this in one of my previous publications. Thanks to programs such as Daemon Tools, we can easily solve this problem.

You won't have a physical disc, but the computer will start to "think" the CD is in the correct drive. Stop for a second, now you need to take a little break from the main task and solve an adjacent one. My article will help you with this. After reading and "inserting" the image into the "drive", return here.

As soon as you have solved the most important task and inserted a physical disk or its image, you will have an autorun window. Click on "View Files".

If the required window is not displayed, then you can right-click on the image or disk so that a dialog menu appears, select the “Open” function in it, or the same “Autorun”.

Now insert the flash drive into the USB port. This goodness is enough on any laptop or computer. Select "Open folder to view files" again. Again, if this does not happen, the right mouse button and the "Open" or "Autorun" function will help you.

As a result, you should have two windows with the "insides" of each of the disks. If this does not happen, just open the CD / DVD, then in a new window go to the "My Computer" section and open the USB flash drive.

Copy files from disk. Click on the desired ones, then the right mouse button and the "Copy" function.

Of course, you can open the disk first and copy files from it, and then "open" the USB and insert everything you need there, but I would not want you to get confused.

Open a second window in which you have files from a USB flash drive, upload them there. Right mouse button and then the "Paste" option.

That's basically it. Problem solved.

Video instruction

In this tutorial video, you can see how to download music to a USB flash drive from a disk - where the buttons are located, in what order to press them, and so on. Everything is very detailed.

If you are confused in my text, then everything will become clear in just 3 minutes.

Some licensed discs with audio files have copy protection. What to do with it? The easiest way is to use special programs that help to remove it.

This method should be treated with great care, since there are no licensed utilities that help to perform this task. The activity is illegal! Therefore, you may have to download files that may contain viruses. Personally, I am afraid of such things. There are too many "values" lurking on my PC.

Considering how active hackers are now, this is a really serious issue. You can read in my style such articles as "The New Vkontakte Virus" or "A Terrible Virus Everyone Should Know About".

Based on the previous words, I do not give you any specific link to the program, and I offer a training video, in the description of which you can find the download URL, for reference only. Know that there is such a way.

Creating an image and then overwriting it

We're moving on to disk images. What is it, I think you already understood. The same disk, only in digital format, intended for sharing with friends, deceiving a computer, they say, something is already inserted into it, and so on.

In general, any image can simply be transferred from a computer to a USB flash drive without problems according to the same principle that I have already described. However, there is an alternative method.

This blog has a detailed article on how to quickly upload a disk image to a USB flash drive using the UltraISO program. In it, I described in detail how to create an image and throw it off, so you can familiarize yourself with it by clicking on the link.

To make this post of mine more useful, I will leave you only a video on this topic, which will allow those who are in a hurry to complete this task faster. I advise others, of course, to read the publication. It details everything that can be useful.

I recommend that you also download the licensed version of this Ultra ISO program from the Allsoft website. There is too much important information stored on any PC that hackers can use to use pirated utilities with peace of mind. I would not want your personal data to be hacked. The risks are too great.

Don't forget about antiviruses too. Of course, they are unlikely to help from well-known scammers who work on a serious scale, but there are only a few of them, and interest in other people's PCs is now huge. This is very easy money. The phrase “It will never touch me” no longer works. Everyone is interested in you.

You can download a good antivirus from the same Allsoft website. For example, I like NOD32.

That's all. Don't forget to subscribe to my Vkontakte group. See you again and good luck.

start-luck.com

Transferring windows 7 to a flash drive

Burning a disc with windows OS for further use is no longer effective. The disk can be scratched, it is not as compact as a flash drive, and its service life is much shorter than in removable media. Therefore, we will consider a method for transferring windows 7 from a computer to a USB flash drive.

There are many ways to do this. Consider the example of using the program "Novicorp WinToFlash. It doesn't need to be installed. It is downloaded as an archive. We launch the software and accept the terms of the license agreement.

Choose free way copying. It will differ in the speed of the program.

Then there will be a series of repetitions of "Next". After that, a program window will appear in which the user will be notified that the "Settings Wizard" will prepare a USB flash drive for copying windows OS to it. Click on the "Languages" button below, and then on the mark.

Check the "Always run in wizard mode" box and click "Next".

We insert the USB flash drive and put a mark "I inserted the disk into the computer ...". We press "Next".

Select the disk where it is installed operating system, and the media to which the files will be copied. We press "Next".

After the transfer of files is completed, click done and remove the USB flash drive.

Imagine that you need to install Windows XP or Windows 7 on a nettop or netbook computer. What is the problem? The fact that Windows comes on a CD / DVD drive, and netbooks do not have drives. Until recently, there was only one way out - to buy an external CD drive and install the operating system from it. The disadvantages of this method are obvious - you need to find the drive first, and then pay a round sum of 50 bucks for it.

Later, other methods appeared that involved the use of flash drives, but from which the read options made my hair move (it is suggested, for example, to download SP from Windows Server 2003 and substitute some files from it). All this was done in the form of scripts and implied the use of the command line. In short, horror and not for beginners. A little later, utilities with a graphical interface appeared, each of which had its own drawbacks and advantages.

In my arsenal, in the end, there was only one left - Novicorp WinToFlash. In our country, it somehow did not take root, although, judging by indirect signs, it was written with the participation of Russians (at the same time, the translation is still sometimes lame anyway, or is this their style?). Its size is small - 8 meters when unpacked. Nanotechnology doesn't smell here, but it wasn't required :) As the saying goes, "did you check? Does it work? Don't touch it!". In fairness, we can say that if you remove all unnecessary languages, such as Chinese, there will be a meter and a half. And yes, it's very nice - it is originally portable, you won't need a tambourine to transfer it to a Live CD.

The utility will transfer all Windows to the flash drive, starting with XP and ending with the seven. DOS is also supported, probably for aesthetes and connoisseurs of beauty. You can also transfer to a Windows LiveCD flash drive and completely clean the flash drive.

So, download the latest version from the official site and unpack it. We launch WinToFlash.exe with admin rights, if you are under the seven.

Click to enlarge

The big green button is responsible for calling the wizard, which will transfer any Windows itself to a flash drive without asking you for anything extra. Feel free to click on it

Click to enlarge

If we make a mistake, we will see a nice window.

Click to enlarge

Then they will ask you to accept the Microsoft license and ask about formatting.

Click to enlarge

The wizard will start formatting the disk, copying files, and more. At the end, you will need to click next and exit.

Click to enlarge

As a matter of fact, that's all. For Windows XP, 2003, Vista, 2008 and 7, the wizard in WinToFlash is one. No more settings.

If you have problems loading, you can play around with the options in advanced mode. Most often, changing the file system helps.

Click to enlarge

If a problem arises, there are resources to solve it, including in Russian. Stock up on a full description of the problem, along with the logs of the program - support will definitely ask for them.

Click to enlarge

We will consider two methods for recording an image Windows 7 to a flash drive

Write the image to a flash drive using UltraISO.
Writing an image to a USB flash drive using command line tools.

Attention!
This article only covers how to burn an image to a flash drive.

detailed instructions for installation in this article: Windows 7 installation.
How and where to download the image legally is described in the same article, in the chapter how and where to download the original image of windows 7 64 or 32 bit.

If you are not sure how much bit Windows version 7 (32-bit ( x86) or 64-bit ( x64)) you will need for the upcoming installation, then you can learn more about the difference between Windows 7 x32 and Windows 7 x64.
Before proceeding with the installation of the operating system, it is necessary to determine from what type of media the installation will be performed. Recently, this issue has become especially relevant, since the market computer technology compact netbook"and not equipped with optical drives, as well as flash- high-capacity drives that have become so popular and at the same time perfectly cope with the task of a boot disk for the operating system.

If you have on hand flash- drive (4 GB , because the installation image takes about 2.5 GB), then after carefully studying and following the steps described in this article, you can install the operating system using flash- drive as a boot drive. This does not require any additional software: everything will be done using the command line and the mounted image Windows 7. Generally installing windows 7 from flash drive- faster (albeit a little more complicated option).

Burning an image in UltraIso to Flash

After you have received the image with Windows 7 you need to burn it to some medium. The question arises "How to do it?".

This article will tell you how to write an image to a flash drive ( USB Flash or HDD Flash) using the program Ultra ISO.

Step 1. Install the program UltraISO(this lesson covers the version 9.31 , although there is no fundamental difference in other versions).
located at the end of the article, in the block Attached files.
Figure 1. UltraISO Setup Wizard

We press "Further", along with specifying the necessary installation parameters.
On the last window NOT uncheck the boxes "Associate .iso file with UltraIso" and "Install ISO CD/DVD Emulator (ISO Drive)".

Figure 2. Additional tasks for the UltraISO program

Step 2 After installation, run the program and in the offer to register the product, select "Trial period", which will give us the opportunity to use this program for 30 days (which is quite enough to burn our image).

Figure 3. UltraISO installation completed

Step 3. Before you start manipulating our image, you need to insert it into a free USB-exit USB flash drive or external hard drive, which will be recorded.

Step 4 Opening our image with "File - Open". Next, we go to "Boot - Write Disk Image (write a disk image)".

Figure 4. Burning a Windows 7 image to a flash drive

Step 5 In field disk drive you need to select your media (in case several flash drives are inserted into the computer). Also check the correctness of the selected image in the line "Image file". In line "Writing Method" choose USB-HDD. When everything is selected correctly, you must click on the button "Record". Before the process starts, you will be asked: “Are you sure you want to continue the process? All information on the flash drive will be destroyed". Check the contents of your flash drive, and if there is nothing important on it, feel free to click "Yes". At the end of the recording, you will be notified that the recording was successful: Burn successful!. Your bootable flash drive is ready.

Write a Windows 7 image to a USB flash drive using the command line.

So, to prepare the image, connect flash- drive to usb-port on your computer. Make sure on flash- the drive does not contain the data you need, since flash- the disk will be formatted.

Now run command line Windows. You can find the launch shortcut at:
Start -> Programs -> Accessories -> Command Prompt.
You can also press the key combination Windows+R, then in the opened window "program start" you need to enter the name of the program "cmd" and press "Enter".

Now, in the command prompt window that opens, run the command diskpart. After that, the system utility for managing disks will start. With this program, we will clear the contents of the disk, create a partition on it. After that, we can make it active, format it and write the contents of the image to it. Then we will only have to place the bootloader files on the disk: after that, when the operating system boots, our flash- the disk will be defined as removable media - we can start the installation from it Windows 7.

Let's consider these actions in more detail.

After the system utility loads diskpart, you will see the prompt as a string DISKPART>.

Now you can move on to executing commands.

With the command list disk you can see a list of all disks on this computer (Figure 5).

Figure 5. Preparing to install Windows 7 from a flash drive: creating a bootable flash drive

Now if you run the command select disk room» , where "room" is the number of the disk that is flash- drive, then we choose this disc to apply all subsequent commands that we will enter when working with the utility diskpart.

As you can see from Figure 1, in our case it will be the command select disk 3.

But be very careful - you can select any hard drive and delete all data on it.

Next, we will delete all data and partitions on our flash- drive. To do this, run the command clean.
The next step is to use the command create partition primary, create on flash- drive a new partition.
Select this section for further application of commands to it using the command select partition 1.
Let's make it active using the command active.

To format the disk, run the command format fs=NTFS. As a parameter of this command, we specify the type file system (NTFS).

Figure 6. To format the drive, run the format fs=NTFS command.

Now it remains to initialize the disk connection using the command assign(an autorun window will open, as if we had just connected to the computer flash- disk) and exit the utility with the command exit(Fig. 7).

Figure 7. Initializing the disk connection with the assign command.

The final step remains - we must copy the bootloader to flash- storage device.

To do this, mount the image Windows 7 that you want to install on your computer.

Now using the command line navigate to this (mounted) drive. After that go to the folder boot and run the command bootsect /nt60K:.
note that instead of a letter "K" this command must contain the letter that was assigned to your flash drive when executing the assign command.

This command will run system utility bootsect with 2 parameters:

the first one indicates the bootloader version OS (/nt60- parameter required to create a bootloader OS Windows Vista and Windows 7).
the second parameter is the letter assigned to our flash- drive.

This will place the bootloader OS on our flash- disk.
If you mount a 64 bit image Windows 7, then you will not be able to run bootsect, if your operating system is 32 bit - because. this version bootsect is 64 bit.

Copying files to a prepared flash drive.

After the flash drive is prepared, the files are copied from the image:
you can mount the image you have with the program DAEMON Tools Lite, then copy all the files from the mounted disk to the flash drive.

Installation

Now if you restart your computer, then by going to BIOS, you will be able to install your flash drive to download and install from it Windows 7 (first boot device).

Now you can move on to the next chapter, which will go into great detail about the next step. Windows 7 installation.

Detailed instructions for installing Windows 7 in this article: Installing Windows 7.

You can also pay attention to recording an image using the utility