Connecting Huawei to PC via USB. HiSuite utility. Why does the computer not see the phone via USB, but is charging? Connecting a Huawei phone to a computer via USB

There are quite a few reasons why the computer does not see the smartphone. Most often this occurs due to the activation of any other connection mode other than a USB drive. Either this happens due to missing or conflicting drivers. Less commonly, the cause may be various malfunctions in the equipment.

This material presents solutions to the most common problems that arise when connecting a mobile device to a PC via USB. For convenience, all tips are divided by importance.

The smartphone is not detected as an external drive

Note:The smartphone must be turned on; if it is locked with a pattern, you need to unlock it!

The very first and obvious action is to let the computer understand in what mode the device is connected. If the smartphone simply charges when the cable is connected, it may be connected in charging mode, or as a media player. If you are using an Android device, you must activate developer mode and then enable USB debugging.

For instructions on how to activate developer mode and USB debugging, see this video.

When everything is done, the next time you reconnect, pay attention to the display and notification shade on your smartphone. A notification should appear asking you to select “Enable USB storage.”

If you are using a smartphone with a different OS, everything is the same. In most cases, in order for the device to be recognized as an external drive, you must select the correct connection type.

One more thing: check if the modem mode is activated on your mobile device. We go to the network settings settings, and if the modem is activated, turn it off.

The computer doesn't respond at all

It is advisable to check the serviceability of components as early as possible to save your own time. If you don’t hear a characteristic signal when connecting, the charge indicator on your smartphone doesn’t blink, the backlight doesn’t activate, or pop-up notifications don’t appear, we try to temporarily change the equipment.

Steps to be taken:

Check the USB cable for serviceability. We just use a different working cable and that's it.
We connect to other connectors. Inoperative USB ports can only be referred to if no “USB” peripherals connect to them at all: mice, keyboards, flash drives, etc.
We are trying to connect the smartphone via USB to another system unit or laptop. If it works, look for problems with the drivers and operating system on your PC.

Software problems

Let's say the computer responds to the device, but a notification appears on the taskbar that the driver installation failed. This indicates the need to install the “correct” USB drivers on the PC.

Often, universal drivers can be downloaded from the manufacturer's website. For example, on the official websites of Samsung and LG there are special sections where you can download a driver that will fit all Samsung and LG models, respectively.

If you have connected many devices from different manufacturers, their drivers may conflict. Try to remove unnecessary ones and install the necessary ones again. Don't forget to restart your PC (you can do your phone at the same time).

If nothing helps at all

In the event that after executionabsolutely everyone recommendations the computer does not see the smartphone, we cannot exclude the fact that the USB connector on the smartphone is faulty. Without special skills and certain equipment, this problem cannot be solved on our own. It is necessary to take the mobile device to a service center or to a workshop where the USB will be resoldered.

You will also like:

How to determine the LTE channel number by frequency

In this manual, we will briefly tell you about the possibilities of connecting a Huawei mobile device to a PC.

To begin, connect your Huawei device to the USB connector; an icon indicating the connection will appear on the notification panel. Next, lower the notification panel on your phone and click on the current connection.

In the list that appears, select the type – HiSuite and wait until Windows installs the drivers on the new device.

After that, go to “Computer” and run the installation file in the new virtual drive that appears (you can simply click on this icon once).

The HiSuite installer will automatically download and install the necessary synchronization components and drivers. This action requires an active Internet connection.

If the HiSuite connection option is not listed, you will need to download and install HiSuite yourself. After successful installation, you need to disconnect and connect your Huawei device to the computer again, preferably reboot it.

Next, you can synchronize with your PC through the HiSuite utility in the windows menu or copy files through Explorer, depending on the connection type selected through the notification panel (HiSuite or MTP).

4huawei.ru

Huawei HiSuite for synchronization with PC. Download HiSuite

The HiSuite program is a proprietary utility from Huawei that has wide functionality that allows you to easily synchronize mobile devices running the Google Android operating system with personal computers running Windows OS.

The utility kit includes an adb driver that allows you to connect communicators, smartphones and tablets to a PC and select the connection mode (Media device (MTP), HiSuite mode, Removable media, Camera (RTR)). It is worth noting the fact that using HS you can connect not only Huawei devices, but also smartphones from other manufacturers (for example, HTC).

Using HiSuite, you can easily manage any user data on your device, be it photos, music or videos, synchronize and edit your contact list and calendar, send and read SMS and MMS messages directly from your PC, and also take screenshots of your communicator and tablet screen , regardless of the Android version and whether the device is rooted.

However, in addition to synchronization, the utility solves another important problem that most owners of mobile gadgets face, namely the problem of data backup. With Huawei HiSuite, you can literally backup all your important data, including applications, in just one click.

And to perform tasks on a schedule, the utility has a built-in convenient task scheduler.

System requirements (for installation on PC):

Operating system: Windows XP/Vista/7 32/64bit Free hard disk space: about 500mb RAM: 1gb

Supported screen resolution: >1024x768pix, 16bit

4huawei.ru

Connecting Honor 4C to a computer allows you to view or change files in the phone's memory or files on a MicroSD card in the computer's explorer.

To connect, you will need a standard USB/MicroUSB cable included with your phone. Huawei HiSuite is not required for this connection!

There are three possible options for using this connection:

Charge only (default mode)
Files – access to all files
Photos – access to photos

The information in this article applies to software version CHM-U01C10B540, also known as Android 6.0 with EMUI 4.0. Connection examples are shown for a computer with Windows 8 and Windows 10.

Connecting your phone to your computer

This is done with a standard USB/MicroUSB cable (included with the phone), when you connect for the first time, the computer installs drivers for the phone. It is not advisable to interrupt the driver installation or disconnect the phone before it is completed. After installing the drivers, the “charge only” mode is used. To change the mode, you need to open the notifications (lower the curtain) and in the “USB connection established” notification, press the Files button or the Photo button to turn on the corresponding mode.

What is a curtain? It’s a drop-down panel with Notifications and Icons tabs. To open the curtain, you need to pull down the top edge of the screen. The curtain will look something like this:

In all modes, the phone is charged from the computer's USB port. Most computer USB ports are capable of delivering a current of up to 0.5 A, which is half that of a standard adapter (1A), so charging from a computer usually takes longer. To speed up charging, it is better to use a network adapter than a computer USB port.

Charge only mode

In this mode, there is no data exchange between the computer and the phone. However, the phone is still visible on the computer:

Displaying Honor 4C in Windows 8 Explorer in “charge only” mode

The phone itself shows the CHM-01 icon, but there are no folders or files when opening it.

In addition, the HiSuite CD shows the installation files for HiSuite - Android Smart Device Manager - Huawei's smartphone software. Clicking on the icon starts the HiSuite installation. I repeat, the HiSuite program is not required to view phone files; everything works without it.

Files mode

This mode is activated in notifications by clicking on the Files button, while the phone works as an external drive, making the phone's memory and MicroSD card available.

Displaying Honor 4C in Windows 8 Explorer in “files” mode

Photo mode

This mode is activated in notifications by pressing the Photo button, while the phone works as a camera (or as a scanner), making it possible to work with images and photographs.

Displaying Honor 4C in Windows 8 Explorer in photo mode

The example shows that in photo mode only the SD card is available, since saving photos to the SD card is selected in the settings.

When you open the SD card, only the folders with images are visible - DCIM and Pictures.

A command to import images and videos appears in the phone’s context menu (icons CHM-U01), just like for cameras or scanners.

Disconnecting your phone from your computer

Everything is simple here - I disconnect the USB, and it turns off. In this case, the phone remembers which mode was selected at the time of disconnection, and the next time the USB is connected, it immediately switches to the same mode. This is convenient because you don’t have to lower the curtain and select a mode. But it may turn out that I need to charge the phone from someone else's computer, in which case it will make available all the phone folders on this computer, which is not very good. Therefore, I usually switch to “charge only” mode before disconnecting the USB cable.

Possible connection problems and their solutions

Most often, problems are caused by a failure to install drivers. As a result, when you connect your phone, messages may appear stating that the USB device is not recognized. In this case, you can try reinstalling the drivers.

For example, disconnect the phone, restart the computer and connect the phone again. Another option is to delete the unidentified USB device in the task manager, which will cause the drivers to be reinstalled.

You can also try connecting to another computer.

Less commonly, the cause of the problem is a bad (damaged) cable. To check this, you need to try the connection with a different cable.

Using the connection

The configured connection is used, as on other devices, to copy materials such as photos, music, movies, e-books, audiobooks. You can also use the phone as a flash drive to transfer files, but you must take into account the limitations of the MicroSD card. For example, Honor 4C works with memory cards up to 32 GB, and the file size is up to 4 GB, so you cannot write a movie or archive of, say, 5 GB on it.

Copy music from PC to Honor phone

There are no special features here - I created a Music folder on the memory card, and I copy mp3 files from the computer into it using a regular explorer. Standard player - the Music application automatically finds the copied files and adds them to the Local music list. Audiobooks are copied in the same way.

Copying movies from PC to Honor phone

I also use standard Explorer to copy movies. The peculiarity is the file size limitation - you cannot copy a file larger than 4 GB (for Honor 4C). Also, when you start copying, a Windows message may appear asking you to re-encode the file - this is not necessary. After copying, you can use the built-in player - the Video application or you can install VLC for Android from the Play Market.

Copying e-books from PC to Honor phone

Copying FB2, PDF, EPub e-book files is done in the same way. To read books, I use the AlReader application from the Play Market.

Connecting Honor 4C to a computer

nhutils.ru

How to connect Huawei MediaPad 10 FHD 3G to a computer via USB

Welcome to droidium.ru. In this manual, we will tell you how to connect Huawei MediaPad 10 FHD 3G via USB to a computer or laptop, like a USB drive. Currently, all Android devices (phones, smartphones and tablets) can be connected using a USB cable.

If something doesn’t work out for you, ask a question in the comments. So, how to connect Huawei MediaPad 10 FHD 3G to a computer via USB. Before connecting, be sure to install all computer drivers for the motherboard required to connect your device to your computer via USB.

Connecting Huawei MediaPad 10 FHD 3G via USB to a computer

Connect one end of the included USB cable to your computer and the other to your Huawei MediaPad 10 FHD 3G. After this manipulation, the USB icon should appear in the gadget’s status bar if the device has been recognized.

In Android 4, on most firmware, USB connection occurs automatically, so first, just try connecting the Huawei MediaPad 10 FHD 3G to the USB of your computer. If the connection does not occur, then you can try connecting the gadget to the computer in USB mode in the following way.

Connect the USB cable to your Huawei MediaPad 10 FHD 3G and your computer. Go to your smartphone settings and select the ‘Memory’ section. Next, find the USB connection settings, where you need to select the device as MTP. A message will appear that the USB is connected, or click on ‘Attach USB as a storage device’ if necessary. A confirmation dialog will then appear. Click 'OK'.

For the old version of Android 2.1, the connection is as follows. On the Home screen, use your finger to pull down the status bar at the top. Then click ‘USB Connection’. And USB mode will be connected.

For Android 2.3 things are a little more complicated. Pull down the notification panel, click ‘Connect as USB storage’. Then click the ‘Ok’ button. When the green Android icon turns orange, it means that the gadget has switched to USB storage mode. In Windows it should appear as a removable USB drive with a drive letter assigned to it.

Updated instructions: How to connect Huawei MediaPad 10 FHD 3G to a computer via USB Download

droidium.ru

How to connect Huawei Ascend P6 to a computer via USB

Welcome to droidium.ru. In this manual, we will tell you how to connect Huawei Ascend P6 via USB to a computer or laptop, like a USB drive. Currently, all Android devices (phones, smartphones and tablets) can be connected using a USB cable.

If something doesn’t work out for you, ask a question in the comments. So, how to connect Huawei Ascend P6 to your computer via USB. Before connecting, be sure to install all computer drivers for the motherboard required to connect your device to your computer via USB.

Connecting Huawei Ascend P6 via USB to a computer

Connect the included USB cable to your computer with one end and the Huawei Ascend P6 with the other. After this manipulation, the USB icon should appear in the gadget’s status bar if the device has been recognized.

In Android 4, on most firmware, USB connection occurs automatically, so first, just try connecting the Huawei Ascend P6 to the USB of your computer. If the connection does not occur, then you can try connecting the gadget to the computer in USB mode in the following way.

How to connect an Honor 4C smartphone to a computer, access files on the phone, copy music and movies, as well as problems and solutions.

Connecting Honor 4C to a computer

Connecting Honor 4C to a computer allows access to files, photos and videos stored in the phone's memory or on a MicroSD card through a standard computer explorer.

Huawei HiSuite is not required for this connection! Huawei HiSuite will be useful for additional features such as backing up settings and files.

To connect, you will need a standard USB/MicroUSB cable included with your phone.

There are three possible options for using this connection:

Charge only (default mode)
Files – access to all files
Photos – access to photos

The information in this article applies to software version CHM-U01C10B540, also known as Android 6.0 with EMUI 4.0. Connection examples are shown for a computer with Windows 8 and Windows 10.

Connecting your phone to your computer

This is done with a standard USB/MicroUSB cable (included with the phone), when you connect for the first time, the computer installs drivers for the phone. It is not advisable to interrupt

installing drivers or disconnecting the phone before it is completed. After installing the drivers, the “charge only” mode is used. To change the mode, you need to open notifications (lower curtain) and in the “USB connection established” notification, press the button Files or button Photo to enable the corresponding mode.

What's happened curtain– this is a pull-down panel with bookmarks Notifications And Badges. To open the curtain, you need to pull down the top edge of the screen. The curtain will look something like this:

In all modes, the phone is charged from the computer's USB port. Most computer USB ports are capable of delivering a current of up to 0.5 A, which is half that of a standard adapter (1A), so charging from a computer usually takes longer. Even on USB 3.0, the charging current is up to 0.9 A.

Therefore, to speed up charging It's better to use a network adapter than a computer's USB port.

Charge only mode

In this mode, there is no data exchange between the computer and the phone. However, the phone is still visible on the computer:

Displaying Honor 4C in Windows 8 Explorer in “charge only” mode

The phone itself shows the CHM-01 icon, but there are no folders or files when opening it.

Files mode

Files, while the phone works as an external drive, making the phone's memory and MicroSD card available.

HOW TO CONNECT HUAWEI TO A LAPTOP OR COMPUTER

How connect Huawei to laptop via USB cable.

Why doesn't the computer see the phone via USB? 100% will work.

Solution of the problem connections phone to computer via USB, provided the required driver is installed...