Before we cover the topic of how to disable the Firewall, let's briefly see what it is all about. Perhaps someone is not aware of the action of this program and its necessity on your computer.

Firewall: what is it and why

Let's start with a literal translation - Firewall - a fiery wall. This is a special program that acts as a firewall between the Internet and your computer. In other words, the program quite imperceptibly protects your computer from various dangers that are just waiting for you to access the Internet. You may not notice right away that you have "picked up" something, but, believe me, sooner or later it will manifest itself. Therefore, before deciding how to disable the Firewall, Windows should be protected in some other way (for example, just do not log on to the Internet for this time).

How to disable Firewall on Windows 7

This method is also suitable for disabling a program with the Windows Vista operating system.

1. Click the Start button (lower left corner of the desktop).
2. There you find the "Control Panel", where we are interested in "Security".
3. Click "Turn Windows Firewall on or off" (Windows Firewall tab).
4. To disable the Firewall, click "Disable", where you are again reminded that this operation is not recommended. We press "okay".

Firewall: how to disable: Windows XP

Now consider the Windows XP operating system. How to disable the Firewall in this case.

1. As usual, we start by pressing the Start button.
2. "Run ...", where we write "services.msc". Next, press Enter (the big action button on the keyboard).
3. In the window that appears, look for "Windows Firewall" (if the version is English, we are interested in Windows Firewall).
4. Right-click and select "Properties" from the drop-down menu.
5. In the window "Startup type" - "disabled" click "Stop" and "ok".

Now when you start Windows, the Firewall will not turn on.

In order to restart its automatic inclusion at Windows startup, you must follow all the steps described above, where the last action will be to change the "Startup Type" to "Automatic".

Now you know how to disable Firewall on XP, Vista and 7. Remember the importance of the functions performed by this program and do not forget to secure your computer.

And finally, what is a firewall and how to disable it on windows xp?

Firewall in translation from English is a fiery wall. Which, by analogy, can be understood as a wall that does not allow unwanted objects to get inside something.

A firewall is a specialized helper program that prevents certain traffic from accessing your computer. A kind of guard dog that lets in its own and does not let other people's information objects.

Who is a stranger, and who is yours, you yourself determine by setting the firewall settings. Frequently asked questions such as what is a firewall and how to disable it on windows xp? Sometimes a standardly configured firewall does not allow you to get the necessary information due to blocking the port. In this case, either you need to unblock the port in the same firewall settings, or disable the firewall altogether.

To disable the firewall, you need to go to the System and Security field in the control panel. Then, choose to enable or disable the windows firewall settings (this is the official name of the firewall). Then put down the appropriate checkboxes and confirm that you did all this deliberately. That's it, and you've fired your traffic guard.

A firewall is part of your computer's virus protection system, and properly configuring its settings will allow you to safely and safely surf the Internet.

Windows 7. Before you start disabling it, you need to be aware of what you are doing and why, because the firewall was invented for a reason, and it is needed for something. And you were going to turn it off. Also, do not think that firewall and firewall are two different things. It's the same thing, it's just that the developers from Microsoft called their firewall a firewall.

In theory, if the firewall is configured correctly, it will perfectly protect your personal computer from various attacks from the outside or from unauthorized access to the Internet by various programs.

There are special settings that allow any program that wants to access the Internet to ask you for permission to do so.

It's pretty convenient. Such programs are urgently needed in our time, since the Internet, and many computers, are teeming with viruses. If you have the ability to customize each program, then when a virus tries to enter the network, the firewall will ask you if it is possible or not. Thus, you can detect unwanted software on your computer in a timely manner.

Firewall: how to disable and why

In addition, you need to understand why you need to turn off the firewall at all. If you install another firewall or antivirus that includes such an application, you may experience problems. The built-in firewall from Windows will conflict with a new, unfamiliar firewall.

To avoid such problems, you need to choose one thing. Almost always leave only Firewall , built-in antivirus.

If you decide to do exactly the same, then you need to know how to disable the firewall. Next, it will be explained how to do it correctly. Because if you do something wrong or disable it completely, then the chance of problems is high.

How to disablefirewall: step 1

First you need to find the place where we will make the initial settings. This can be done in different ways. We will act quickly and optimally.

Press "Windows" + R on the keyboard. For those who don't know what the "Windows" button is, it's located between the "alt" and "ctrl" keys.

As a result of this, you will see the "Run" window. Enter "shell:ControlPanelFolder" there. Next, you will open the various elements that are in the control panel. The difference is that if you just open the Control Panel, then all the menus / elements / utilities will be grouped, and in order to get to the place you need, you need to make a few clicks and know the desired category. And so, according to the way we propose, everything is much simpler. All elements will open at once, and you will find the "firewall" item in alphabetical order.

After this menu item opens, we will see a list of connections that are currently on the personal computer. Disable our firewall for each network and save.

How to disablefirewall: step 2

In the new opened list of services that are in the operating system, select "Windows Firewall". Click on this item twice.

In the window that opens, find the "General" tab. We are looking for a button there that says "Stop". We press. Then we turn our attention to the field "Startup type". Here you need to specify the value "Disabled".

How to disablefirewall: step 3

We call the "run" window and enter "msconfig". The system configuration menu should open. Open the "Services" tab. In a huge list of various services we find the Windows Firewall. Uncheck the box next to this item. We press "save".

It is worth noting that if you want to turn the firewall back on, then everything must be done in the reverse order, from step 3 to 1.

How to disable firewall windows 7? This question is quite common among users. In this article we will tell you how you can quickly disable the firewall, but before moving on to this issue, you need to understand what a firewall is and what it is used for.

A firewall is a special software designed to protect a computer from various hacker attacks that can be carried out by intruders through the Internet or local networks. Firefall works on a fairly simple principle. This software checks the entire data flow that is transmitted through the network and, if suspicious activity is detected, blocks malicious traffic.

Despite the fact that the firewall performs a very important job and significantly increases the level of security, sometimes it becomes necessary to disable it. For example, if you installed a third-party firewall, then you need to make sure to disable the Windows 7 firewall.

In order to disable the Windows 7 firewall, you need to open the Control Panel and go to the "System and Security" section.

After that, you need to open the "" section.

In the "Windows Firewall" window, you need to click on the "Turn on and" link. This link is on the left side of the window.

After that, you will be taken to the Windows 7 firewall settings window. Here you can enable or disable the Windows 7 firewall. In order to disable the Windows 7 firewall, you need to check two boxes next to the “Turn off Windows 7 firewall (not recommended)” function.

How to disable Windows 7 firewall using service management

In addition, you can disable the Windows 7 firewall using. You can do this in the following way. Open Control Panel and go to System and Security -> Administrative Tools -> Services. In the "Services" window you will see a list of services, here you need to find a service called "Windows Firewall".

Right-click on the Windows Firewall service and select Properties. After that, a window with the properties of this service will open in front of you. In order to leave it, you need to change the startup type from "Automatic" to "Disabled", and also click on the "Leave" button.

It should be noted that disabling the Windows 7 firewall without installing another firewall is not safe. Thus, you will significantly reduce the level of protection of your computer.

Hello guys What is a firewall in general and why do I personally not recommend disabling it? Firewall, or as it is called Firewall in English, is a program that looks at what programs climb into the network, and she herself knows how to do this and which ones cannot.

That is, a firewall is what controls network connections in Windows. In a sense, this is even more important than the work of an antivirus ... And I will try to explain in simple terms why ...

What does an antivirus do? The antivirus looks at what you have on your computer, regularly checks it for viruses, or does it a little slowly, but constantly. There are all sorts of technologies such as heuristic analysis and the like. Well, that is, the antivirus catches the virus, and here I want to emphasize what exactly it catches. The firewall has nothing to do with viruses at all, it simply controls access to the Internet for programs. Those programs that have a bad reputation - they will not be able to access the Internet. And it can be a virus, and to be more specific, a Trojan that wants to transfer data to its creator! That is, the antivirus may not immediately detect it, but the firewall will not allow such a stranger access to the network and the Trojan will not be able to transfer your passwords and logins to the hacker. Well, do you understand a little? Hope so!

So about the importance of this firewall, I hope you understand. I’ll write to you what I did, but if you want, you don’t have to read it, but go straight to disabling the firewall in Windows 10. So, look, I installed Outpost Firewall for myself (I think this is the best firewall) and allowed access to network only a limited number of programs, and then put it into blocking mode. And now it allows Internet access only for the programs that I have included in the list! And everyone else is banned. That is, you understand that now, no matter what virus I have, it will not be able to send anything to the hacker, since access to the Internet will be blocked for him!

Well, everything! Now I will show you how to disable this firewall in Windows 10! So look, right-click on Start and select Control Panel from the menu (and this menu can also be called up with the Win + X buttons):

Then, among the icons, look for the Windows Firewall and launch it:

Then this window will open, here you click on this button:

Now look, here you will have two settings and here you need to check both boxes to disable, that is, both at the top and at the bottom:

OK it's all over Now! Now you have disabled the firewall in Windows 10, after which there will be such a window with red stripes, well, like the computer is in danger:

But since I am already writing about disabling Windows security, I will already write how to disable the defender!

How to disable Windows 10 defender permanently?

The defender, unlike the firewall, already performs a slightly different role, it is essentially a built-in antivirus. But as you understand, due to the fact that this is a Windows antivirus, few people like it precisely because it is Windows And many want to turn it off, because they install a third-party antivirus, and for some users this protector protects so much that the computer slows down, here such things gentlemen!

To turn it off, go to the Control Panel again and there you already launch the Windows Defender icon:

Then a window will open where you need to click on Options:

The Windows settings window will start, there you need to move all the sliders so that they are in the Off state:

After that, the Defender himself will already turn red:

Well, that's all, I showed how to disable the built-in Defender and Firewall (aka firewall). But look carefully and just don’t disable them, but only when it’s really necessary, well, for example, if you are going to install a third-party antivirus.

But I have prepared another bonus for you. In general, there is one recipe for how to disable everything altogether, well, in general, all these telemetry, espionage, all these protections, security ... All this goodness can be disabled using the utility. It disables not only spying, but also everything else, in general, I advise you to look at this utility!

Well, that's all, I hope that I wrote everything normally here and that everything was clear to you. I wish you good luck and that you have no problems and everything was nishtyak