How to disassemble the remote control for a Sony TV. Step-by-step instructions: how to clean the TV remote control at home. Download video and cut mp3 - we make it easy

Very often, when using the remote control, problems may arise. For example, the buttons began to work poorly or get stuck. You can fix such troubles yourself, the main thing is to know how to properly disassemble the remote control, for example, from.

It is worth noting that there is no significant difference when disassembling devices of different brands, since remote control devices from Samsung, Sony, Philips, LGhave no fundamental differences in design. Most often, remote controls differ only in size, location and design of the button panel.

Next, we will consider the general principle of disassembling the remote control for carrying out cleaning. For other purposes, technicians do not recommend disassembling the device yourself: it requires certain knowledge of the principles of the structure and functioning of microcircuits, which not everyone has.

To avoid any difficulties with the question of how to disassemble the TV remote control, you should prepare:

• small Phillips screwdriver;
• a mild kitchen knife or flat-head screwdriver;
• plastic card.

Each of these things may be needed at some point.

Sequencing

The process of disassembling the remote control is quite simple, and every owner can handle it if it is necessary to clean the device if its operation is disrupted.

After all elements have been cleaned using alcohol, you can begin to assemble the remote control in reverse order.

If during the inspection it was possible to establish that the cause of the remote control malfunction is a burnt-out microcircuit, then there is no need to search for a new one - it is much easier and simpler. After all, today popular manufacturers such as Sony, Samsung, Lg, Philips sell remote controls separately from the TV. There are even ones suitable for various devices. The cost of repair may be higher than the price of a new device.

Features of disassembling the touch panel

The principle and sequence of work is the same as for the push-button version. It is important to choose the right screwdriver, and after removing the case, carefully disconnect the touch sensor, which is located under the keyboard. All actions and movements must be very careful so as not to damage the surface of the sensor and the cables that connect it to the board.

The best solution in the event of a breakdown or poor-quality operation of the touch remote control is to contact a specialist.

Complete disassembly of the TV remote controlSony BRAVIA

The TV remote control can fail at any time. And if you were wondering how to disassemble the remote control for a Sony BRAVIA TV, then you definitely need our help.

We often encounter buttons sticking on this device; this can be easily dealt with at home. Secondly, the remote control must be cleaned of dust and dirt. Often, due to foreign objects getting into the device, it does not work correctly.

So let's get started. To begin, take a small screwdriver and unscrew all the screws you see. It's not difficult, the main thing is to be careful.

The remote control is not very difficult to open, but you should use a knife and use it to push back the latches, thanks to which it closes. To begin with, open it slightly, but do it so that the appearance of the device is not damaged. You need to separate the upper part of the case from the lower one.

The keys of the device are rubber; they can be wiped with a clean damp cloth to remove dirt. The microcircuit, if it stops working, can also be wiped with a solution containing alcohol. Just don't overdo it. Allow the parts to dry thoroughly before assembling the device.

The remote control will work stably and correctly only if it is assembled correctly, also please note that if any parts of the device are damaged, it will not function even after you disassemble it.

From , remove the batteries from it. Sometimes the compartment contains retaining screws that hold the top and bottom of the case together. If your remote control model has such screws, use a suitable screwdriver and unscrew them. If there are no screws, then the remote control body is held on by latches located on the top or bottom of it.

Insert a screwdriver into the junction of the housing parts. Pry the upper or lower part of it and, applying force, disassemble the remote control. You will see that it consists of three main parts: the Body;
Remote control chip;
Rubberized pad with control buttons

Look at the microcircuit. One of the main reasons why TV remotes malfunction is that frequent use wears off the conductive coating on the buttons or microcircuit. If the coating remains intact under the layer of dirt, the remote control can be restored to functionality.

Wipe the chip with a cleaning solution. Remove dirt from the TV remote control housing and the gasket with the buttons. If the contamination is too strong, such as happens from many years of using the remote control in a plastic bag, thoroughly rinse all its parts with water, except, of course, the microcircuit. The main thing is to let them dry thoroughly before assembling the remote control, so as not to provoke accelerated oxidation processes in the already assembled device.

Sources:

• SONY IPTV TVs

Every home has household appliances, which are usually equipped with a remote control. This remote control is very convenient, as it can be used to control equipment from a distance. However, remote controls very often break down and require repair. How to disassemble the remote control to repair it?

You will need

• A screwdriver made of plastic or hard rubber, a blank sheet of paper.

Instructions

Prepare a clean surface. It is best to lay down a white sheet of paper, as small details that are very easy to lose will be clearly visible on it. Study yours carefully. The assembly principle for all remote controls is approximately the same, in the location of the mounting bolts and latches. Read the instruction manual for the household appliance for which you need a remote control. Very often the structure of the console is given there. It will help you disassemble the remote control correctly without damaging any parts.

Remove the cover of the compartment where the . Inspect the latch of this compartment. It very often breaks and begins to detach itself from the body. If the latch is broken, it must be replaced, since gluing the broken piece is useless. Remove the batteries. Make sure that the batteries are not oxidized. Inspect the contacts in the compartment. They must be clean, free of stains and foreign coating. If the batteries are oxidized, you will have to clean all the contacts, otherwise the remote control may not work. It is also recommended to buy rechargeable batteries instead of batteries. They are good because they do not oxidize. You can also save money by using batteries.

Download video and cut mp3 - we make it easy!

Our website is a great tool for entertainment and relaxation! You can always view and download online videos, funny videos, hidden camera videos, feature films, documentaries, amateur and home videos, music videos, videos about football, sports, accidents and disasters, humor, music, cartoons, anime, TV series and many other videos are completely free and without registration. Convert this video to mp3 and other formats: mp3, aac, m4a, ogg, wma, mp4, 3gp, avi, flv, mpg and wmv. Online Radio is a selection of radio stations by country, style and quality. Online Jokes are popular jokes to choose from by style. Cutting mp3 into ringtones online. Video converter to mp3 and other formats. Online Television - these are popular TV channels to choose from. TV channels are broadcast absolutely free in real time - broadcast online.

The remote control is an important thing in the house. However, people usually begin to appreciate the ability to change channels and adjust the volume of the TV without leaving the couch when the battery runs out or the remote control starts to work poorly. Replacing the battery is a simple task, but it’s a completely different matter when the remote control simply starts to work poorly. Usually the reason is simple - the mechanism is clogged, the buttons become difficult to press, and it becomes clear that the device should be urgently disassembled and cleaned. How to do this correctly?

First of all, it is worth noting that any equipment in the house should be properly cared for. Only in this case will it work efficiently and serve you for a long time. The remote control is small, but still an element of technology. Moreover, the lion's share of the load falls on it, because you constantly pick it up and press buttons. To ensure that the remote control works longer without having to clean it, you should only use it with clean hands. Very often the remote control gets clogged because it is handled with dirty hands.

Eating in front of the TV is not only harmful to health, but also to the equipment that comes to hand. Small particles of food get inside and render the devices unusable.

If you eat in front of the TV, try to finish your meal completely, wash your hands, and only then continue working with the remote control.

But what should you do if the remote control for your recently purchased Sony TV has already started to work poorly? First, try simply changing the battery; in most cases, the remote control begins to respond more actively and stops creating problems. If this does not help and you have every reason to believe that there may be a lot of debris inside the remote device, then cleaning is clearly required, which should be done carefully and carefully at home.

Disassembling the device: how to clean the TV remote control

In order to clean the remote control, it must first be disassembled. Depending on the TV manufacturer, the remote control may be closed differently. Some companies make simple latches that can be opened without a screwdriver, while others use screws and it will be impossible to wash the inside of the remote control without a tool.

The main TV manufacturers today are:

• Sony;
• Samsung;
• Phillips.

The advice is that almost any remote control can be opened with a knife by unscrewing the screws with its tip. However, you should be guided by the situation. If it is difficult to unscrew the screws with a knife, you can break the threads, and in the future the screws will sit tightly. The ideal option, of course, would be a small Phillips screwdriver.

When you open the remote control, be careful and attentive. It is important not to move connections or parts, otherwise you may get confused and not know how to put everything back in its place. There is no need to wipe the chip and board; the most important thing is to simply get rid of dust. Alternatively, you can vacuum the remote control inside, setting the lowest traction power.

Instructions: how to disassemble the Sony TV remote control

Cleaning the inside of the remote is always a good idea, but you need to open it first. Most remote controls today can be easily opened with a screwdriver, but there is a completely different category of TV remotes that are held together without screws at all. These are remote controls for new Sony TVs. However, opening them is actually not that difficult; to do this, you should take a knife or a screwdriver, the latter will be even better, and carefully use the tip to pry the junction of the remote control cover. You will find that the device opens up slightly.

You should not try to completely open the remote control in one place at once, otherwise you will simply rip off all the fastenings. Carefully, step by step, open the lid, moving around its perimeter and gradually opening it.

You may not be able to do this operation the first time, but the main thing is to pry the lid off well from the beginning and then simply take your time. Even if you hear that one of the fasteners is cracked, it doesn’t matter, the cover will hold on to the others. But be careful, because completely stripped fasteners mean you'll have to reattach the cover.

Proper cleaning of the TV remote control at home

In most cases, to fully clean the remote control, it will be enough to open the main box of the device and thoroughly blow it out. Sometimes you will need to wipe individual elements with a cloth. However, it happens when the remote control is very dirty and can only be saved by complete cleaning. In this case, get ready to disassemble the device as expected - separate the top and bottom covers, separate the rubber gasket under the buttons and the board with microcircuits. You shouldn't clean the board, it can damage it, but you can even wash the rubber gasket under the tap. In this case, you should first dry it completely and only after drying use it again.

As a last resort, if even the board is dirty and you definitely want to clean it, then arm yourself with a cotton swab, moisten it with alcohol and wipe with careful, gentle movements so as not to damage the microcircuit.

If you don’t want the remote control to quickly become dirty and require detailed cleaning when disassembled, we recommend cleaning it regularly from the outside, which is much simpler and easier. To do this, you can use ordinary wet wipes or cotton wool soaked in alcohol. Although alcohol is a liquid, it evaporates instantly, so it will not cause any harm to the remote control, nor to the microcircuits inside.

There are other preventive measures that will prolong the stable operation of the remote control without cleaning, these are:

1. Buying a cover. A simple but extremely effective solution that allows you to keep your remote control clean and tidy. Yes, each time you use the remote control you will have to remove it from the case, but this will protect the device from debris and dust.
2. Polyethylene. If you don’t want to spend money on a full-fledged case, we offer you a simple, but also effective solution - wrap the remote control in film. It could even be cling film, the ends of which can either be hidden behind or carefully sealed with tape. No dirt will get inside the remote control, and the film can be replaced at any time.
3. Hygiene. Of course, the most basic precaution is first of all your personal hygiene; you should not use the device with dirty hands or while eating.

All you have to do is resist the temptation and your TV remote control will serve much longer and more reliably.

Expert answer: how to clean the TV remote control (video)

Let's summarize, the remote control is a very important thing in the house, which is difficult to do without. However, without proper protection and care, the TV remote control quickly becomes dirty, both externally and internally. To avoid this, you should use a case or wipe the device from time to time, both externally and internally. In order to open the remote control, you should use a screwdriver or, in extreme cases, a knife, which should be used to unscrew the screws and open the cover. Sometimes modern remote controls are closed with latches; in this case, you need to carefully open the lid along the edge until it comes off completely.