Correct connection of the gamepad to the computer. How to connect a wireless joystick? How to connect a computer joystick to xbox 360

Many modern computer games allow you to use the controller from the Xbox 360 as a control. It is an excellent alternative to the mouse and keyboard. Everything you need software it is very easy to install if your PC is using the operating system: Windows 7, Windows 8, Windows 8.1 or Windows 10.

I would like to note right away that the following information is only needed to connect the joystick from the Xbox 360 console. The next generation controller from the Xbox One console is connected using a Bluetooth wireless connection and on operating system Windows 10 does this automatically.

How to connect xbox 360 joystick to pc

First power on

Follow the steps to set up an Xbox 360 Wireless Controller connection on Windows 10:

Connect the device when USB help cord if you do not have a wireless controller. If this is a version without wires, then only a special station for receiving a signal should be connected to the USB connector, which looks like this:

The Windows 10 operating system will automatically detect the device and begin installing the necessary software. You don't need to download any third party software as it may damage your computer. As soon as a message about successful installation appears, you can close the installation window and start using the controller.

Open any modern game and try out the possibilities of the joystick. If the control is correct, then the drivers were installed correctly.

If the system could not detect the Xbox 360 controller, then you can try to move the USB cable to another connector and then try to install again;
Controller still not working? Check windows updates 10. To do this, go to the options menu located in the "Start". There, go to the "Update and Security" subsection and check for updates;
View the user manual for the game. Features The developers of the game project have specified some special parameters for launching joystick controls for their game.

Setup under Windows 8 and 8.1

In the case of operating Windows systems 8 and Windows 8.1, the drivers are pre-installed. You just need to connect the docking station or the joystick itself via the USB connector and you can start playing.

If you encounter problems in operation, you should use the same software for Windows 7.

Options under Windows 7

There is a tab for downloading drivers. You should select the bit version of your system:

Windows 7 (32-bit only)
Windows 7 (64-bit only)

In the language selection menu, select the language of your operating system;
Save the setup file;
Find the downloaded program on your hard drive and right-click on it. Select the "Properties" tab;
Set the compatibility tab and select Windows 7 in the drop-down list;
Press the "Accept" and "OK" buttons;
Double-click on the installation file to start the software installation process for using the Xbox 360 joystick. You will need to restart your computer.

Checking the functionality of the controllerXbox360 on a personal computer

When using Windows 8, click on the start window, type in the search joy.cpl. For Windows 7, just search the system;
Find the Xbox 360 controller and click on "Properties";
To test the performance of the device, just press the central key of the joystick in the form of a large X;
If the device was not recognized, then you should move the USB cable to another port and try to start the joystick again.

Installation on older systems

For older systems like Windows XP and Windows Vista, it is better to install the software using the CD that comes with the Xbox 360 controller for a personal computer:

You need to insert the disc into the PC drive. The installation process can be enabled through the "My Computer" window if it did not start on its own;
In the installation window, click on the "Install" button;
The system will automatically install all the necessary software and allow you to enjoy the game even on several outdated operating systems. You just need to reload Personal Computer after installing all the necessary components.

Computer discovery

In order for the system to be able to detect the joystick, you need to pair it. To do this, press the desired button on the docking station.

For a more comfortable game, many gamers use special devices - gaming gamepads. They allow you to interact with the gaming environment without a keyboard and mouse. Devices connect directly to computers. It is very convenient, but not always easy to establish synchronization between the respective devices. Especially when it's not about the "native" gamepad. Next, we will try to understand whether it is possible to connect the Xbox 360 joystick to a computer. And how exactly it is carried out. This information can be useful for every gamer who does not have a gamepad for Windows, Linux or MacOS.

Possibility of synchronization

How likely is it to successfully connect an Xbox 360 joystick to a computer? With the right actions - at 100%.

Today, you can connect almost any joystick to a computer or laptop. The main thing is to know how to cope with the task. It's not always easy.

Most of all you have to think about the correct setting of the gamepads. Usually, for "non-native" joysticks, either game parameters or special emulators are used. But the most important thing is to get the said device to work on a PC.

What are gamepads

Connecting an Xbox 360 joystick can be done in different ways. The further algorithm of actions is determined by the type of gaming device available. As well as the operating system used on the PC.

At the moment, there are wired and wireless joysticks. The former, as a rule, are connected much easier than the latter. Next, we will get acquainted with all the existing options for the development of events.

With wires for Windows 10

How to connect an Xbox 360 joystick to a computer? It all depends, as already mentioned, on the type of gamepad available. Let's start with wired devices that sync with Windows 10.

To cope with the task, you just need to connect your PC to the Internet, and then insert the wire from the joystick into USB port. Now it remains to wait a bit - the drivers for the device will be automatically initialized, after which the user will be able to use the corresponding device.

Windows 7/8 and wired models

How to connect an Xbox 360 joystick to a computer? The instruction studied earlier will not work for Windows 7 and 8. The thing is that the user will have to manually download the drivers when working with these operating systems. There is no corresponding library package for Windows 8, but drivers from Windows 7 are suitable for the G8.

To connect an Xbox 360 joystick to a computer using a wire, it is recommended to proceed as follows:

Go to the Microsoft website, and then find the section there that is responsible for downloading drivers.
Select the model of the gamepad and select the operating system with which the user works.
Wait for the download of the appropriate set of libraries to finish.
Connect the gamepad to the USB port of the PC.
Initialize drivers for Windows using the downloaded installation wizard.

As soon as the operation is completed, the joystick will work in full force. Usually it does not require additional configuration.

Important: You can download drivers for the Xbox 360 Controller for Windows from other websites.

Without wires

How is it carried out Xbox connection 360 to a computer? Some claim that this is an easier process than synchronizing devices through wires.

As a rule, in order to achieve desired result, it is recommended to behave as follows:

Purchase a dedicated Bluetooth adapter for your Xbox 360 controller on Windows. It costs about 600-800 rubles, sometimes included with the joystick.
Connect the purchased adapter to the USB socket on the computer and turn it on.
Install drivers for the appropriate device.
Charge the joystick and turn it on.
Launch the Bluetooth interface on the computer, and then find a new wireless device. It's a plug-in gamepad.
Synchronize the gaming device with the Bluetooth adapter using the corresponding button.

All that's left now is to wait a bit. The drivers for the Xbox 360 controller will be installed, after which the device will start working properly. If the process does not start automatically, it must be activated manually.

Conclusion

We found out how the Xbox 360 joystick is connected to a computer. It's not as hard to do as it seems. The main thing is to follow these recommendations and guidelines.

Problems often arise with wired models. For example, they may not work when gamepads are connected to the front USB sockets. In this case, you need to connect the device to the rear ports.

How to connect a gamepad to a computer?

Compatibility level, all emulators are compatible and all games can work with the controller. To nitpick, the only negative point that can be found is the lack of support for the smartphone, which is very small compared to the possibilities.

Thanks for reading my brain of my mobile gamer! . This manual covers the wired version of the controller.

But in both cases, you need to purchase an accessory. You didn't miss it, you need an adapter if you want to play with a wired controller and connect directly to your tablet or smart phone. It will cost you less than 5 euros and is the investment you need to enjoy this gaming comfort.

Many gamers prefer to play PC games on consoles. But many games look much better visually on the computer. Therefore, some "console players" use a computer to play games, while connecting a gamepad to it for convenience. However, not everyone knows how to properly connect the gamepad to the computer so that it works.

Steps to get there.

It should recognize the device without problems.
Now you can play games that will recognize the controller directly!

Notes. To overcome these issues, your device must be rooted. If it's not, you can do it easily.

Note: both apps are required and the second only works if you have rooted your device. Exit the app and go to the game you want to customize. . Video tutorial in English, if you want to see the manipulations in question. Here is a complete guide to connecting the controller to your smartphone.

Gamepads are used by many gamers today. With their help, you can not only play, but, in general, manage computers. There are different models of joysticks. Some are PC-only, while others connect to consoles. In any case, it is necessary to correctly connect them to the main device. Otherwise, the device will not work. Wireless joysticks are very popular. We will connect them. In fact, everything is not as difficult as it seems. Especially if you use the "native" gamepad.

About wired models

First, a few words about how to connect a joystick in principle. Previously, USB models were popular. They are still produced and very successful work. But due to the presence of wires, such gamepads are being abandoned more and more often.

To connect these devices, you will need:

Turn on the computer or console.
Insert the USB cable into the appropriate socket on the main device.
Wait a few seconds.

After the actions taken, the devices will be synchronized, after which the gamepad will work successfully. This algorithm of actions is relevant for "native" set-top boxes. To connect the joystick from set-top boxes to a PC, you have to run special emulator programs. Nothing difficult! But we will try to understand how you can connect a wireless joystick to a computer or set-top box. This question is asked by many gamers.

Windows

Let's start with the simplest. We are talking about connecting wireless gamepads from the series Windows to the computer. These devices work using Bluetooth technology. Therefore, there are no problems with them.

To connect a wireless joystick to a PC, you need to:

Turn on Bluetooth on your computer.
Enable gamepad. It needs to be charged beforehand.
Search for new Bluetooth devices on your computer. This is done using special programs or in the "Control Panel" - "Hardware and Sound". You need to click on "Add a new Bluetooth device".
Wait.

Will happen in a few minutes automatic search and installing drivers. After that, the gamepad will work normally in the operating system. If your computer does not have Bluetooth, you will have to additionally buy a special adapter.

From PS3 to PC

Now let's move on to more difficult tasks. For example, let's try to connect a wireless joystick from PlayStation 3 to a computer. This will be more difficult to do.

In general, the algorithm of actions will look like this:

Install MotionJoy.
Turn on Bluetooth on the computer and on the controller. The latter must have a charge.
Connect the USB cable to the joystick.
Open MotionJoy and go to "Driver Manager".
Click on "Install all".
Restart your PC and run the application mentioned earlier again.
Open "Profiles".
Select a profile for the gamepad to work.
Go to BluetoothPair.
Click on Pair Now.
Disable USB.

That's all. Now you can safely work with the PS3 gamepad on your computer without any wires. Fast, convenient, reliable. Sometimes there are crashes during games. This is normal, because we connected a non-native wireless joystick to the computer.

PlayStation 4 and PC

Today, many gamers play on PS4. This console has its own gamepads. And they can also be connected to computers. The main thing is to know how to act. The steps will be somewhat similar to the previous algorithm.

To connect a wireless joystick for PC from PS4, you will need:

Install InputMapper.
Run the appropriate program.
Enable gamepad.
Enable Bluetooth on PC. It is advisable to purchase an additional USB whistle.
Press the Share and PS buttons on the gamepad at the same time.
Release when the joystick starts flashing.
Go to "Wireless Devices" on your computer.
Quickly insert the USB whistle into the appropriate slot.
Select the desired gamepad in the InputMapper.
Click on the "Connect" button.

It is best to buy a wireless joystick for PC (For Windows series) and work with it. For example, to configure the gamepad using an emulator for PS4.

XBox 360 and computers

What if a gamer has a 360 xbox wireless joystick? In this case, the situation is not the best. Just like that, connecting the gamepad to the computer will not work. Standard Bluetooth won't work. You will have to buy a special adapter from Windows for the xBox 360.

Once the user has the appropriate device, they will need to:

Insert adapter into PC. For this, a USB connector is used.
Enable gamepad.
Open the program from the adapter (usually it is installed automatically).
Select a joystick and wait for the drivers to initialize.

Not the best scenario. Many users are unable to cope with this task. Therefore, it is better not to suffer with the xBox 360. The gamepad can always be replaced. The xBox 360 wireless joystick is not always suitable for a computer. And that's okay.

XBox One and Windows

How to be the owners of "X Box Van"? They can easily connect the gamepad to the computer. Especially if the latter is running Windows 10 with the latest updates.

In this case, just follow these steps:

Turn on Bluetooth on the computer.
Turn on the joystick.
Press the small button on the top of the gamepad.
Wait a few seconds.
Select the detected gamepad on the computer in the "Wireless Devices" section.

That's all. Owners of an older Windows joystick from xbox one will have to connect in the same way as in the case of the "X Box 360". To do this, you will need to purchase a special adapter. Expensive and very reliable!

Gamepad and xBox 360

How to connect wireless joystick to xbox 360? This is another the simplest task that any gamer should be able to handle. Usually this operation does not cause any problems.

How to connect xbox wireless joystick to console? To do this, follow these steps:

Turn on attachment.
Turn on the charged joystick. To do this, you need to click on the "Guide" button.
Hold down the small button on the top panel of the device on the gamepad for a few seconds. You need to hold it for about 15-20 seconds.
Release the button.

If the gamepad blinked indicator lights, everything is done correctly. Now you can safely use the console. Gamepad connected successfully.

PlayStation 4 and native console

What's next? As already mentioned, every gamer should be able to connect "native" gamepads to consoles. Usually detailed instructions can be studied in a special book attached to a particular console. The process does not cause any difficulties.

We will try to figure out how to connect the PS4 gamepad to the appropriate console. Unlike previously proposed algorithms, when you first turn on the console, you will have to register joysticks. Otherwise they won't work.

To connect a PS4 wireless joystick, you will need:

Insert the USB cable into the console and into the gamepad.
Turn on both devices.
Wait.
Press the connection button on the gamepad. This is a PS labeled control.
Disable USB.

Now connect a sufficiently charged gamepad using dedicated button on the device. If the device is not registered, you will not be able to work with it.

Results

We figured out how you can connect wireless gamepads to your computer and native consoles. The above methods will work on all consoles. First, the gamepad is registered on the device, and then you can control the game wirelessly.

To avoid any problems, it is recommended to use only the latest drivers for gamepads and not connect them to third-party devices. Otherwise, the wireless joystick may not work. It is better to use a USB cable to bring the idea to life. Then any joysticks are easily connected to the computer!

Probably each of us would like to play calmly and comfortably using the Gamepad, to feel, at least for a moment, sitting at the console, because you get some pleasure from this. But at the same time, many faced a problem: 50% support exclusively the original Xbox 360 controller, many give up, they say "no no no, I won't buy myself such a pleasure, I'd rather play on the clave with the mouse, it still makes no difference".
In another case, in each game you have a different layout of buttons, it turns out that every time you need to go into the options and score a new layout and redo everything for yourself ...

Enough tolerating this! I want to help all of you solve all problems at once, that is, kill two birds with one stone. We will play on a simple controller through the Xbox360 joystick emulator, I will not guarantee that in all games, because I did not try the method in all games, but all games had the same button layout (exception - maybe some more).

Stage 1

A) Download the emulator: (downloads: 513150)
b) Unpack the archive to any folder where it is convenient for you.

Stage 2. Setup

A) Run the emulator ( x360ce.exe). If your controller is connected to USB, you should hear a small sound greeting in the emulator, if there was none, then your joystick is not connected. Also at the top there is an inscription Controller 1 with a green die indicating your controller is connected.

b) Select a category below "Thrustmaster Dual Tigger 3 in 1 Rumble Mods" and click on the button "Load".

c) Now just click on the analogues and joystick buttons, see which buttons do not match. Did you see? Remember? Now we begin to expose ourselves to them as we please. The button layouts are in 5 cells i.e. right, left and bottom center.

d) Setting buttons is quite simple: click on one of the cells (i.e. buttons), for example, on the left side of A B X Y and select a category "Record", click on the controller and everything, the button is recorded. We do this with everyone.

e) You can also drive manually, just press "Buttons" and select any desired key.

e) Now the last step. After we have done everything correctly, set the layout, click on the button below "Save".

Stage 3

A) After we have everything set up, we need to drop all three files from the folder "x360ce.exe", "x360ce.ini", "xinput1_3.dll"

to the root folder installed game - to where he is .exe(for example "RaccoonCity.exe"). Here's what it all looks like:

b) Everything, they threw it off. Now we launch the game itself, and when you enter, you will hear an audio greeting (exactly the same that you heard when you turned on the emulator). Exception: if there was no sound, then the controller may have been disabled in the game settings, if you use it, then you should definitely hear a sound greeting.

We try, we unsubscribe.

Play for health!