How to enable call waiting on Megafon? How to enable call waiting on Android Enable Beeline call waiting

When you are talking on a mobile phone, other people trying to reach you will hear a busy signal. In this case, the conversation takes place over one line, as was customary in traditional wired telephony.

But mobile communication is more modern and more advanced, it allows you to receive calls from two lines. For this purpose, there is the “Call Waiting” service from Beeline, which makes it possible to hold calls. Let's look at its functionality in more detail.

The “Call Waiting” service from the Beeline operator allows you to accept a second call without interrupting the current call. This opportunity is used by many subscribers who are familiar with such a useful service. And only a few people still do not know about the presence of a second line and the ability to put the current call on hold or on hold.

Why do we even need call holding and waiting capabilities? The answer is simple - in order not to miss an important call. Let's say you provide construction services and publish your number on business cards and in open sources. By talking on the phone with friends or family, you deprive your potential customers of the opportunity to use your services - after hearing a busy signal, customers may turn to competitors.

If the “Call Waiting” service from Beeline is active on your number, you will be able to:

• Hear the second call signal;
• Put the current call on hold;
• Accept the second call without interrupting the first.

This way, you can avoid losing a possible business contact. The call holding service on Beeline is provided as part of the basic “Call Waiting” service. This means that during a conversation with one person, you can call another without interrupting the first conversation. To do this, just press the control key, putting the current call on hold, and then call the number you need.

Having heard the signal of the second call, you can not put the first call on hold, but simply interrupt it, completely switching to the conversation with the second subscriber.

The “Call Waiting” service is controlled using button “2”. That is, having heard the signals of the second call, you can switch to it by pressing “two” on the numeric keypad. Further switching between subscribers is carried out by pressing the same button. But the easiest way to switch between subscribers is with the help of prompts indicated on the mobile phone screen - switching is carried out by keys illuminated with the help of prompts.

How to connect Beeline call waiting

If your number has not yet activated such a useful service, you need to activate it urgently. To do this, use the USSD command *43#. After this, the service will be activated and you will be able to receive calls from two lines alternately - During the second call you will hear short beeps on the handset.

You can also connect to the service through the “Call Waiting” menu in your mobile phone. If the service is not connected through the menu, use the USSD command. Another way to connect to the “Call Waiting” service is through Beeline’s “Personal Account”.

If the connected “Call Waiting” service begins to fail for some reason, it should be reconnected. To do this, use the USSD command *110*041#. If the command is not sent, try calling the special service number 067409041. After this, the functionality of the service will be restored.

How to disable Beeline call waiting

There are no commands for disabling the “Call Waiting” service on Beeline. But you can try to disable it through the menu of your phone or by contacting one of the Beeline customer service offices.

The article about the “Second Line from MTS” option will give you complete information on how to connect and disconnect this service.

Often, MTS users need to connect or disconnect a service. You decide for yourself what service you need, you yourself calculate how much money you are willing to spend on it. You have every right to enable any option. For example, service "Mobile Internet" now one of the most popular. People increasingly want to be in touch with the world, and MTS provides them with its services, offering loyal Internet tariffs. MTS will offer you a wide choice of connecting various options. Visit the official cellular website MTS (www.mts.ru), where you can see the full list of services offered by the company. Service "Call waiting and holding", which is the same as "Mobile Internet" It is also considered one of the most popular options.

“Second line” from MTS: what is it?

We will look in detail at what this service is, when it appeared, why it is needed, and how to connect it. Previously, if a subscriber was talking, then the other caller would hear beeps, which informed him that the subscriber was busy. Option “Call waiting and hold” or “Second line” automatically connected on all MTS tariff plans for those subscribers who use cellular communications MTS since March 13, 2009 and does not require any action from its clients. Those who joined earlier, that is until March 13, 2009, but wants to connect and use this option, they can enter a free one on their phone USSD request.

This service prevents the subscriber from missing important calls. "Second line"— this is an opportunity to keep two subscribers in touch at once. A person has the right to receive incoming calls even when he is already talking with someone on his mobile phone. You can ignore or reject the call, or answer, then the first interlocutor will have to wait a little on the second line. But it is possible that the second caller disconnects himself. This service works similarly with outgoing calls. During a dialogue with a subscriber, you can make important outgoing calls, while maintaining a conversation already in progress.

Let's analyze the work "Second line" For example. You are talking on the phone with your best friend, but at the same time, you are expecting a call from a work colleague. When you receive a second call, you hear a periodic sound - this means that you are receiving a call. You accept the second incoming call, while the first call goes on hold. The situation is similar with outgoing calls. For example, a work employee called you and asked you to clarify the data, and in order to clarify it, you should call the customer. Without disconnecting the employee, you dial the customer’s number and find out the data. After you have all the information, disconnect from the “second line”. All this time, an employee was waiting for you on the “first line”, to whom you pass on the information received. Everything is very simple. You save not only your time, but also the time of other people.

“Second line” from MTS: operating principle

If the caller gets to someone who is already talking, he will hear a polite request to wait. In turn, the talking subscriber hears periodic sounds that inform him about the presence "second line".

The subscriber himself decides which line is more important to him and makes a decision. The decisions a person can make are:

• He can ignore the incoming call, continuing with the current conversation;
• If the second caller persistently calls you, then in order to answer him, you should first enter a number "2", and then the green call button, but in such cases the first caller goes into mode "expectations";
• If the second incoming call is very important and involves a long conversation, then in order to answer the second caller and interrupt the conversation with the first, you should first press the number first "1", and then the green call key;
• It also happens that the second incoming call comes from a person who is not interesting to you, and you do not want to talk to him. The periodic sound begins to bother or distract you, then the second incoming call is reset by pressing the number «0» and still the same green call button, while the current dialogue is not interrupted.

Please note that currently the MTS mobile network has the ability to offer its customers two call modes simultaneously - held and active mode. In order to accept the third incoming call, you need to end any previous conversation. If this is not done, then the third subscriber will in any case only be able to hear busy tones.

As for charging, it all depends on the side of the active and held calls. There will be no charge for incoming calls, and both outgoing calls will be charged under the tariff plan you are using. Long-distance calls within Russia are charged at local outgoing rates. If the subscriber is in national or international roaming, then the cost of calls will be paid according to the current roaming tariff schedule, depending on the direction.
This option is available to all MTS users. The service is activated using USSD request by combination *43#. This combination also makes it possible to check the status of the service.

“Second line” from MTS: setting up a second line in the MTS mobile network using the telephone menu

Technology keeps up with the times, so even the oldest mobile phone models have the ability to connect another line. What needs to be done for this? It's very simple, to do this you need to visit the call settings. But first, it’s more logical to check the status of the option (whether it’s connected to you or not), and if it’s not connected to you, then connect it. When all the settings have been checked, you can safely start using the service from MTS - “Call waiting and holding” or as they say “Second line”.

Instructions:

1) Find " Settings" or "Options" in the menu of your mobile phone. Once you are there, find the tab "Challenges". Scroll until the “Call Waiting” option appears on the screen; if you do not find it, then enter the tab "Extra options" and try to find it there, as soon as you find it - select this function. A new window will open with a choice of options: Enable, Cancel, Status, or just the opposite "Call Waiting" There will be a place for a mark (checkmark). Click "Turn on" or check the box. The message will appear on the phone screen “Query running” or “Updating parameters...”. The phone will notify you that the operation was successful with the phrase “Call waiting is on”;
2) If you receive a message with a negative result, for example, "Operation failed" or "Call waiting is not enabled". The reasons why the negative result came are as follows:

• You attempted to activate the service outside the network area;
• While making a request, the operator could get stuck;
• Your phone may be faulty.

3) Try waiting a short period of time, change your location, or restart your phone. After the above steps have been completed, try again.
4) You can also activate this option by sending a short USSD request MTS operator. Enter the code on your phone's keypad *43# and press call. Your phone number will automatically connect to the required function. The system will soon notify you that you have activated the service.
The MTS mobile network can also offer you another useful service that will allow you to find out about those calls that were made while the phone was turned off, that is, inaccessible. This service is called “You have been called”.

“Second Line” from MTS: how to disable this service?

It happens that some subscribers do not need the service "Call waiting and holding", then how to disable it? Finding out how to refuse to use the “second line” from MTS mobile communications is not difficult. Disconnection from this service is carried out using the previously indicated USSD request in *43# format or use the telephone menu.

If you are talking to one subscriber on the phone, and suddenly a call from another subscriber arrives on your line, and you do not want to interrupt the conversation with the first subscriber, you can use the “Call Waiting and Hold” service from Tele2. Many operators offer this service, and Tele2 is no exception. Its essence is to accept another incoming call while communicating with another subscriber on another line so that not a single call is interrupted.

Who is it suitable for?

This service is useful for all those for whom communication is a very important part of their lives, who always want to stay in touch with everyone, and even for business people.

Do you have a lot of work and literally don’t have time to answer all the incoming calls and dream of doing it at least simultaneously so as not to waste a lot of time? Your family is dear to you, but do you realize that you should never miss an important call from your boss? Perhaps you would like to relax a little during the day while working with clients and hear your own voice?

These are just a few situations in which you may actually need this service from Tele2, which will allow you to always stay in touch with everyone, even if you are busy.

Description of the service provided

The essence of this service is very simple. If during a conversation with a person you hear short beeps, you should know that the system is signaling you about its offer to connect a new line with another subscriber. In addition, you will receive the maximum possible information about the incoming call - such as the subscriber number or the name of the person calling.

In fact, this service provides a whole bunch of possibilities:

• You will be able to receive a second call without being interrupted by the first caller by keeping him on hold
• You can also make a second call yourself during a conversation with the first subscriber, also putting him in standby mode
• You will be able to accept another line by interrupting the first one
• You can talk to the first caller and if you don’t want to accept the second call, simply ignore it
• You will be able to talk to both lines alternately, keeping each on hold as you switch.

The peculiarity of this service is that for the second incoming call you will have to pay for both calls in accordance with your tariff. That is, let’s say, if you are talking with one subscriber whom you dialed yourself and during the conversation you make another call, you will pay for two calls, and if the first call was dialing and the second was outgoing, then you will be charged only for outgoing call.

There may also be a situation where you are on the line with one person and want to make another call, leaving the first caller on hold. You make a call, but the person on the other end of the line rejects your call. Thus, you will be automatically returned to the conversation with the first caller, and no money will be debited from you.

Service management

So, how to activate this service?

1. Using the ussd request *43# and press the call key.
2. Open the phone menu, go to call settings, select the call waiting service and switch the slider to the active position.

Each phone model has its own command names, but this should be the essence.

If you are no longer interested in using this service, you can deactivate it using the following methods:

1. Using ussd request #43# and press the call key.
2. Open the phone menu, go to call settings, select the call waiting service and switch the slider to the inactive position.

To perform all the above commands you need a cell phone, the brand does not matter, you only need a properly working display and buttons, or only a correctly working display if you are using a touch phone. When you see another incoming call, you will see the necessary prompts on the screen to help you figure out what exactly to do.

The “Call Waiting/Hold” service consists of two modes: Call Waiting and Call Hold.

Call waiting

“Call Waiting” mode - allows you to receive an audio notification during a telephone conversation and information on the mobile phone display about the receipt of another telephone call. In this case, the sound signal about an incoming call will be heard only by the subscriber to whose address this call is received.

To use the “Call Waiting” mode after adding the “Call Waiting/Hold” service, you must activate it through the mobile phone keypad.

At the same time, on the display of the device you can see a message about the result of the actions performed.

If the “Mobile Office” and “Call Waiting/Hold” services are activated, the “Mobile Office” service will have priority. When receiving/transmitting a fax or data, the Call Waiting/Hold mode does not work and the subscriber will hear busy tones.

Call hold

“Call Hold” mode - allows you to make an outgoing call during a conversation with the first subscriber or receive an incoming call from the second subscriber, while the first subscriber will be in hold mode.

Also, the mode allows you to switch between calls without losing them, i.e. alternately talk with two subscribers.

When working with the “Call Waiting/Hold” service, it is better to use standard GSM control codes:

It is also possible to use the mode through the telephone menu (see the instructions for the telephone).

Attention!
If a subscriber calls numbers 0870 (Mobile Assistant), 0890 (MTS Contact Center), 0876 (financial control), “Call Hold” mode does not work.

How to add a service?

Service " Call waiting/hold" can be added either when concluding a contract or to a previously concluded contract:

• through ;
• through ;
• by calling the MTS Contact Center (0890).

The “Call Waiting/Hold” service is included in the basic network settings package of JLLC “Abundant TeleSystems” and from 06/01/2016. is provided to all MTS subscribers in “active mode”.

What is the price?

The service is added free of charge and has no subscription fee.

What if I add both services?

When simultaneous activation of the “Call Waiting/Hold” and “Call Forwarding” services using a conditional forwarding code (code 61 “no answer” or code 67 “busy”), the “Call Waiting” mode is activated first, and then the “Call Forwarding” mode.

During a conversation, the subscriber sees the expected (second) call on the telephone display and hears a characteristic sound signal. The subscriber can answer the call, i.e. he will use the Call Waiting mode.

If, within the time specified for forwarding, the subscriber does not answer the expected (second) call, then the “Call Forwarding” mode will work for the second call. And the second call will be forwarded to the number specified for forwarding.

Tariffication

The subscriber pays only for outgoing calls, depending on the tariff plan. All incoming calls to a mobile phone are free, except calls while in roaming.

Second rings when calls are being made are received quite often. Especially for those people who have a contact list of more than fifty names. And in most cases there is no particular desire to interrupt one conversation for another. But there are situations when the boss calls and his call simply cannot be ignored. But I don’t want to answer the first call either. What to do? For such cases, Megafon has provided two options: “Call Hold” and “Call Waiting”. With them you can always stay in touch with two subscribers and control calls at your discretion. In this article we will look at how to connect and disconnect these services, how to answer a call without interrupting the conversation and how much it all costs.

Basic information about Call Hold and Call Waiting services

“Call Hold” is a service that allows you to put an already ongoing conversation on hold and call another subscriber, as well as switch between calls.
“Call waiting” is a service that allows you to answer a second incoming call without turning off the first conversation

As we can see, these two services work on a similar principle when someone has to wait. This is their principle of operation.

Subscription fee for both services absent
Cost of a one-time request for the "Call Hold" service - 1 rub.
There is no fee for using the service in the All Inclusive tariffs.

How to answer a call without interrupting the conversation?

Each service has its own control commands.

"Call waiting":

1. To answer an incoming call without interrupting the current connection, press 2#[Call button];
2. Return to first conversation- again 2#[Call button];
3. To reject an incoming call without ending the current call, press 0#[Call button].

"Call Hold":

1. To call another person, without interrupting the current call, press 2[Call button]<номер другого абонента>[Call button];
2. Switch between two current connections - 2 [Call button];
3. To finish the second conversation and return to first, press 1 [Call button].

How to connect and disconnect services?

The Call Waiting service is activated automatically.

1. To her disable, you need to use the service team #43#[Call button]
2. To re- to plug service, you can enter the command *43#[Call button].

The Call Hold service can be activated and disconnected in two ways:

1. Connection:
   - using the service command *105*604#[Call button];
   - through your personal account.
2. Disable:
   - by calling the contact center at 0500;
   - through your personal account.