How to clean cs go from unnecessary files. How to remove blood in CS GO: clear the map of debris. Physically deleting files

After a difficult round, there will always be a lot of bloody stains, bullet marks and other debris on the map. DeadMatch cards are especially guilty of this. And it is very unpleasant when the enemy turns out to be one such “spot” - at long distances it is difficult to distinguish them. Moreover, a large amount of graphical garbage on weak computers can cause FPS to drop. And this is a spoiled pleasure from the game and several undone frags.

How can you remove blood in CS GO and get rid of this scourge? Very simple! The game has several ways to eliminate various unnecessary parts.

How to remove blood in CS GO - clear the map

So, to get rid of garbage at any time during the round, just enter one single command into the console:

After this, the map will be completely cleared of any traces of the presence of players on it. Bullet holes, blood stains and other marks will simply disappear.

But this option only removes existing traces. He cannot prevent their occurrence. Therefore, after some time the card will be dirty again. How to do it right in this case?

We remove violence in the game - no death, no blood

If you don’t want blood to appear at all, you can use another convenient command. This will completely turn off the violence in the game and force the enemy to surrender upon death:

Violence_hblood 0

This command must be entered into the launch parameters of CS:GO. In this case, each time you enter the game, the parameter will automatically make changes to the settings. Thanks to this, when shooting at the enemy, blood will not appear at all, and after death they themselves will give up and carefully lie down on the ground.

It is enough to simply remove the command from the launch options for death to be enabled again. Of course, this is not an ideal way to remove blood in CS GO, but it is one of the most effective.

How to bind a team forever?

Constantly entering a combination into the console is inconvenient and can cost you victory. Fortunately, you can set binds to absolutely any key.

Therefore, you need to set up a team responsible for removing traces of blood and bullets in CS:GO from walls and the ground. And for this you need to register a special bind in the console. For example:

bind"z" "r_cleardecals"

After this, when you press the Z key, the game will automatically remove all garbage.

Important point. If you want to get rid of blood in CS:GO constantly, then you can add this bind to all used buttons. Then, with each action, the card will be cleared. For example:

bind"mouse1" "+attack;r_cleardecals"

When using this command, every time you shoot or stab with a knife, all traces will be destroyed. With the same success, you can put this bind on all other buttons - movement, weapons, and so on.

Effect of eliminating blood

If you remove traces and unnecessary details from the map, the effect will be very good:

• it will be easier to track down your opponent - blood stains will not distract;
• FPS will increase - garbage will not “bite off” the computer’s performance;
• From the fresh bullet holes you can roughly guess where the enemy is.

As you can see, it’s a complete benefit. So now we know how to turn off blood and prevent it from appearing during the game. And at the same time we were able to remove traces of bullets in CS GO and other debris that sometimes makes it so difficult to carry.

Good day, dear Counter Strike 1.6 players! Today I want to talk to you about such an important topic as cleaning the CS 1.6 menu from various advertisements. Players often ask this question, especially young players who have just started playing CS 1.6.
I'll start with a small example. There are many different servers on the Internet that contain various commands for changing the standard menu to your own. And their “menu” very often contains a separate link at the very top, for example, Visit our server, and so on... Particularly malicious servers replace the settings tab with a link to their server, which is very often annoying. So how to deal with this? More on this below.

How to clean the CS 1.6 menu?

First, we look for where your Counter Strike 1.6 is installed, it doesn’t matter whether you have steam or non-steam, you need to find the installation location. The only difference in steamers is that their folder with CS 1.6 is called not Counter Strike but Half-life.
Next, go to the cstrike/resource folder and find the GameMenu.res file in it and delete it. After deleting, go back to CS 1.6 and all advertising will disappear, and the menu will become standard. If it didn’t work out for you, then you can download cs 1.6 from our website.
This method is the simplest and most common; if you have any difficulties, you can ask any question in the comments.

How to prevent the GameMenu.res file from being modified?

CS 1.6 servers simply replace this file with their own. To protect yourself from this, you will need to open the property of this file and check the “read only” box. If you did everything correctly, then in the future you will not have a question about how to clear the menu from advertising.
Thank you for your attention! Don't forget to visit our website!

Many players have problems uninstalling CS 1.6 from their computer. How to fix this problem? Typically, there are several ways remove CS 1.6.

First step

1. Turn off the game if it was turned on.
2. Turn on the task manager. It should not contain processes that are to one degree or another related to CS 1.6. These processes are the following: hl.exe, hlds.exe and others.
3. Next, open the menu, where we look for and open the control panel. After that, go to the “Add or Remove Programs” folder. There you need to find Counter-Strike, next to it there is a delete button, which you need to directly click on. Also delete the folder in which CS 1.6 itself is located (for example: C:/Games/CS 1.6).

Second step (cleaning the registry)

1. In order to carry out this removal step, you will directly need to download and install a file called ValveCleaner.reg. It weighs very little. After opening the file, a Registry Editor window will appear. It is necessary to answer with consent.

As a rule, you can clean the registry yourself. This is done like this:
1. Open Start and turn on the “Run” function. In its field we indicate this: regedit.
2. In the window that opens, follow this path: HKEY_CURRENT_USER\Software\Valve. Then click on the “Delete” button, which is located near Valve.
3. In addition to this, it is worth deleting the following folder: HKEY_LOCAL_MACHINE\SOFTWARE\Valve.

If you complete all of the above steps, CS 1.6 will be removed from your computer. If in the future you install any game from Valve, all settings will be default. We hope now you know how to remove CS 1.6. But deleting such a beautiful and legendary game from your computer is a sin. See you soon.

Physically deleting files:

1) First, make sure the game is not running, go to Windows task manager and in the tab "Processes" make sure there are no processes with the name "hl.exe", "hlds.exe", "voice_tweak.exe" etc., otherwise the game will not be able to be deleted.

2) Go to the Start menu/Control Panel/Add or Remove Programs, find Counter-Strike in the list and click "Uninstall". If Counter-Strike is not in the list or Windows reports an error that it cannot be uninstalled, skip this item and move on to the next one.

3) Delete the folder where Counter-Strike 1.6 is located, for example C:\Program Files\Counter-Strike 1.6.

Cleaning the registry from Counter-Strike:

To automatically clear the registry of Valve products, download and run the file (downloads: 12880), in the Registry Editor dialog box with the message "Adding information may cause values ​​to be changed or deleted unintentionally and components may not function correctly. If the information in ValveCleaner.reg comes from an untrusted source, do not add it to the registry. Continue?", click Yes ".

(downloads: 12880)

If you want to clean the registry yourself, follow the instructions:

1) Go to the menu Start/Run...(or press Win+R) and enter "regedit".

2) In your Registry Editor's list, go to: HKEY_CURRENT_USER\Software\Valve, right click on the subdirectory Valve and select "Delete".

3) You can also delete the subdirectory yourself. HKEY_LOCAL_MACHINE\SOFTWARE\Valve,
for Windows x64: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Valve.

Note: Please note that after cleaning the registry, all Valve game settings, as well as Steam program settings, will return to default. This does not apply to in-game keyboard shortcut settings.