What to do if your iPhone won't turn on? Life hack: what to do if your iPhone turns off and won’t turn on Why iPhone 6 might not turn on

The iPhone turned off and won’t turn on - a problem that every owner of an Apple smartphone faces at least once in their life. Below we will look at all the most common reasons why a smartphone does not want to turn on. I will not touch on the reasons related to the hardware problems of the iPhone, since this is work for service centers and it will be unrealistic for an untrained user to fix it at home.

How to turn on iPhone

Before we begin to directly determine the reasons why the iPhone does not turn on, we will check 2 points that are not directly related to any malfunctions.

1. If your phone turns off due to low battery, it may take some time to turn it back on. Keep your smartphone on charge for at least 15 minutes - this will be enough for the battery to gain the necessary charge. Try turning it on. Doesn't turn on? Read on.
2. If you are sure that the battery charge is sufficient, but the iPhone still does not turn on, the reason may be that the firmware freezes or the smartphone goes into save mode. In this case, a hard reboot of the smartphone will help us.

• For all models except iPhone 7, simultaneously press and hold the power and home buttons for about 20 seconds.

• For iPhone 7, you will need to simultaneously hold down the power and volume down buttons for the same 20 seconds.

In the best case, the phone will turn on and you can continue to use it as usual. If it doesn't help, read on.

Software malfunction

And although Apple devices are rightfully considered more reliable than smartphones from other manufacturers, they are also susceptible to crashes, freezes and other software errors. The causes of such malfunctions are usually:

• A large number of simultaneously running applications.
• Hacking firmware using jailbreak
• Errors during device update
• Magnetic storms, gypsy curse and other unknown reasons...

A radical way to solve problems related to iPhone software is to flash the firmware via iTunes in DFU mode. In this case, we will need a computer and a USB cable (it is better to use the original one).

It should be understood that during the firmware update, all data from your phone will be deleted, so it is recommended to periodically create backup copies and this applies not only to iPhones.

• Download and install the iTunes app
• Launch the installed application and connect your iPhone to your computer
• Press the Home and Power buttons at the same time, count to 10 and release the power button. Hold the Home button until iTunes says your iPhone is connected in recovery mode
• In the window that appears, you need to click the “Restore iPhone” button and confirm again in the new window.

• iTunes will download and install the latest firmware for your device.

Restoring in DFU mode is the maximum that an untrained user can do on his own. If this method does not help, then most likely the smartphone malfunction is due to hardware problems.

Hardware malfunction

If none of the methods described above helped you, with a high degree of probability we can say that the problem is in the hardware of the smartphone. There may be several reasons:

• Natural wear and tear of electronic components
• If water or other conductive liquids get inside the device
• Battery fault
• Malfunction caused by the use of non-original accessories - charger, cable
• Damage to smartphone connectors

Do not try to disassemble the iPhone yourself, even if you suspect a specific problem. Unskilled intervention can end disastrously for your iPhone; entrust this work to professionals.

The iPhone turns off and does not turn on - contact a service center; attempting to repair it yourself will only aggravate the situation and increase the cost of further repairs.

Almost all owners of Apple gadgets have to get acquainted with the unpleasant situation when the iPhone 6 does not turn on - that is, when there is no response to any commands. Observing a non-working phone, the owner scrolls through the worst-case scenarios in his head, but there is no need to panic.

If there were no falls from a height, or the gadget did not come into contact with a “wet” environment, then everything may not be so scary. In this article, we will provide a list of the main reasons that can lead to a sudden shutdown of the phone, and we will also name the most effective ways to eliminate failures.

If the iPhone 6 is dropped and does not turn on, there is a possibility that the battery charging connection module was damaged by the impact. This microcircuit recharges the battery from the charger unit. When this element is damaged, the iPhone stops charging both on and off (in the second case, you simply will not be able to turn on the gadget).

By the way, due to a breakdown of this module, the iPhone may not be charged from USB. A damaged charging module leads to disruption of connections between the battery and other telephone systems. Whatever the reason for its failure, the module needs to be replaced.

Checking the battery

The most common, simple and fairly obvious reason for a phone not turning on may be a dead battery. If the screen on your iPhone 6 goes blank and won’t turn on, what should you do? Of course, it is advisable to put it on charge. Moreover, it makes sense to wait about fifteen minutes from the moment you start charging before trying to turn on the gadget again. This is necessary so that the incoming energy charge is enough for system activation.

If you use a non-branded charger (for example, at work), due to poor contact, the battery may not receive a full charge, as a result of which it will run out much faster.

You can, of course, change the battery yourself - there are many instructions on this on the Internet. However, if you do not have confidence in your own abilities, then it is better to take both the charger and the gadget to a service center - as a result, you will not lose the manufacturer’s warranty.

There is a possibility that the iPhone 6 does not turn on after being discharged due to broken or dirty cables and charging ports. Try to clean all the input and output ports, and also change the charger, preferably a branded one. Often the port becomes loose while charging the phone in the car. No matter how reliably it (at first glance) is fixed, it is necessary to understand that constant shocks and vibrations during the trip negatively affect the quality of the connection.

Other models of Apple equipment may occasionally experience problems, for example:
Why iPhone 7 won't turn on
Why iPhone 5s won't turn on and how to fix it

Hardware problems with iPhone 6

Problems with hardware can also arise from the motherboard, whose damage is most often caused by a fall. Among the obvious signs of a breakdown are: spontaneous reboots, loss of sound, the appearance of a red screen and, at some point, the device’s refusal to turn on. Only a “major” repair will save the gadget in such a situation.

If the screen of the iPhone 6 does not turn on, this may be evidence of a loose contact or failure of the display. Its service replacement costs half the price of a brand new device, since it is replaced as a complete unit - Apple does not produce individual spare parts.

Sometimes it is enough to secure the corresponding cables more firmly and replace the frayed cable with a new one.

In addition, the problem may be a blocked or broken power button, especially if the phone got wet or fell shortly before. You need to remove the protective cover, wipe the button and grooves. If there is no visible damage, there is a need to open the device.

iPhone 6 software errors

If the iPhone 6 does not turn on after an update or the gadget suddenly turns off when fully charged and does not respond when you press the Power button, there is a possibility that it has gone into a special saving mode - turning off on its own in order to reboot. Try pressing two buttons at once - Power and Home, holding them pressed for about 20 seconds. As a result, a reset and standard reboot will occur, after which the device should start.

Video

Unfortunately, even with such a high-tech and reliable device as the iPhone 6 Plus, an unpleasant situation can happen.

Violation of operating conditions, an absurd accident, and sometimes a manufacturing defect can cause a smartphone to fail. One of the most common problems is when the device does not respond to pressing the “Power” key.

Sooner or later, most iPhone users face this issue. The problem of iPhone not being able to turn on is quite common. Each generation of iPhones has its own characteristics of this problem. The first thing you need to do is connect your iPhone 6 to the original charger.

Most often, the culprit of the breakdown is the “Power” button itself, which has a damaged contact pad or cable. The reason most often lies in moisture getting inside the case or mechanical damage to the part caused by the phone falling. Also, often a smartphone’s failure to turn on is due to a serious software glitch or failure of the power system controller.

Why and how to solve

There are many reasons why the iPhone 6 turns off and won’t turn on.

They can be broadly divided into the following:

• complete discharge of the device;
• software problems;
• hardware problems.

Software problems are easier to solve; in a situation with hardware problems, the solution is more complex and expensive.

Video: Replacing the bottom cable

Software glitch

The most common reason why an iPhone won't start is a software glitch. To fix a software glitch, you need to do a hard reboot of the device. To do this, press and hold the Power key and the Home key simultaneously for 15 seconds. As a result, the device will reboot and will be available for normal operation.

If this does not help, then you need to try to put the device into recovery mode. To do this, hold down the “Power” and “Home” buttons for 30 seconds.

In a situation where such a basic solution to the problem along with thoroughly charging the battery did not solve the problem, the possible reason for the non-working device is as follows:

• The gadget’s battery is faulty (needs to be replaced with a new one);
• The adapter or USB cable is damaged (the adapter or USB cable needs to be replaced);
• The cable connector is dirty (it is necessary to clean the cable connector);
• low-quality (cheap) cable (replace with an original one);
• mechanical damage to the connector and other mechanical damage, for example, due to a fall, moisture, after charging in a car, etc. (you need to contact the service center);
• defect (you must contact the place of purchase).

It is also possible that the iPhone may not turn on after updating the firmware.

There are three different scenarios depending on when the failure occurred during the firmware update:

• reflash the phone again;
• replace the faulty NAND Flash. This is a memory chip on which all the owner’s personal data is stored;
• replace the failed Nor Flash. This is the GSM module memory chip. All parameters of mobile operators are stored there. Without these parameters, the device will not be able to make calls.

Power and charging problem

If you can't turn on your iPhone 6, then most likely there is a problem with the power or charging. First of all, you should try to charge it. Moreover, you need to connect it to the charger for at least 20 minutes from the adapter and 30 minutes from the workstation.

After this, you need to try to start the iPhone without disconnecting it from charging. If everything is normal, the display will show a symbol of a lightning bolt inside a low battery.

When the battery of an Apple smartphone is completely discharged, after a short charging, when you press the power button, the display displays a picture showing a socket with a lightning bolt symbol.

The way out of this situation is to charge the device for a longer time. In this case, the charging time must be at least 3 hours.

There are situations when the connector through which the phone is charged fails when using a non-original charger.

It is very important to know how to easily charge your iPhone 6 in a car, and even more important to follow these basic rules. This leads to serious consequences. At best, the iPhone battery needs to be replaced. At worst, this means replacing the power controller or repairing a failed power circuit.

iPhone 6 could

In addition to problems with the battery, the iPhone not turning on can be explained by human error. This is especially common when the phone is carried in a trouser pocket.

The device connector becomes clogged with dust and dirt, and the next time you try to charge it, the iPhone simply breaks. This problem is not very serious, since any service center can fix it in a few minutes for little money.

Fill with liquid

Getting your phone wet or even flooding it with liquid is not uncommon. Problems with the iPhone can begin not only when it drowns in a pond, but even when it gets caught in light rain. In this situation, the gadget may begin to fail.

In this case, cleaning the device or component repair of the motherboard is highly recommended. It is important to stop using the phone immediately if moisture gets inside the device.

Solving the problem is not entirely trivial, so it is recommended to seek help from a certified service center and avoid problems that may arise in the future.

Lose to the floor

The problem with turning on the iPhone may be due to mechanical damage, namely falling to the floor. It is important to remember whether the fall occurred a certain time ago, since the peculiarity of this situation is that problems with the smartphone can begin to appear quite a long time after the fall.

An impeccable appearance (no scratches or other visible flaws) does not mean that there are no problems with it.

Alternatively, one of several cables may snap off:

• power cable;
• display cable;
• battery cable.

A more serious situation is associated with a soldering problem on the motherboard or damage to one or more microcircuits.

iPhone users may encounter a situation where the device turns off and does not turn on. If you don’t consider the simplest options, when the battery simply wasn’t charged in time, then most likely the issue is a malfunction of the boot data block of the gadget’s operating system.

This problem can be solved if you try to restore the partition by connecting your smartphone in DFU mode.

Often, a hard reboot will help to remove the device from this situation, and if moisture gets inside it or there is mechanical damage, it is better to contact a professional.

An iPhone is a thing that shows the status of the owner and is simply one of the most convenient smartphones on the market. Accordingly, losing such a device is much more unpleasant than a regular phone.

But then the day came when the iPhone 6 turned off and did not want to start up again. Button presses have no effect, and the 6 shows less life than a regular stone. At this moment, most owners begin to panic and are ready to pay any money to repair the device or even buy a new one. But why shouldn’t you lose your head and what to do if the iPhone 6’s screen has gone dark and won’t turn on?

Causes of breakdowns

Any repair begins with diagnosis, because it is impossible to solve a problem without knowing the reasons for its occurrence. So think about why iPhone 6 won't start. If you manage to drown your device in wine or drop it from a height, internal damage is possible.

Software failure

If the smartphone received an update before the problems began or pirated firmware was installed, but the phone itself does not start or charge, then there was a software failure and the software is to blame.

Mechanical failure

If the device turns off by itself and the source of trouble is a mechanical breakdown, then without special education you will not be able to fix it. You need to bring your smartphone to the service center. But when the gadget does not turn on or charge due to firmware or viruses, you can try to fix the problem yourself. And only then, if it doesn’t work out, spend money on specialists.

The next stage is checking for signs of life. It’s one thing when the phone turns off and doesn’t turn on and doesn’t respond to charging. Even in this condition it is possible to restore it. And if the charge indicator lights up, the chances increase.

But more often the iPhone turns off and does not turn on, does not respond to charging, and the screen generally ignores any key presses. At the same time, if it turns off and does not turn on, what you should not do is try to open the case and inspect the insides. Such actions automatically render the warranty for the newly purchased “six” useless. The “opening” should be done very carefully; delicate cables and microcircuits can easily be damaged.

Battery failure

The reason that the iPhone turns off without your intervention is often a “dead” battery or a system error. In the first case, the charge of the device at the time of the last start is not even so important. It may turn off even at 100 percent or while connected to power.

If it does not respond to the power cable, and the indicators are silent, then the most likely outcome is a dead battery. Here it is no longer possible to do with the usual replacement of the charger; most likely you will have to change the battery.

In order not to waste money, check the signs given by the device in this case. So, if the smartphone charges, but does not work as it should, then the problem is most likely with iOS.

Possible causes of breakdowns and their solutions

Frostbite of the device

If you live far in the north or the winter in your city is particularly cold, this may cause your phone to break down. Moreover, iPhones are in no way protected from cold up to “eight”.

Therefore, the six frozen to death is a common practice in our country. The device will not respond in any way to pressing and will temporarily seem like a brick, but correcting the situation is very simple. First of all, put the device in a warm and dry place, then connect the charger to it and wait for at least 15 minutes. All other things being equal and a timely reaction, the gadget will quickly come to life and become functional again, but often warming up is not enough.

You have no choice but to check the device for any signs of life. After half an hour of charging, without removing the device from the power, hold down the “Home” and the power button for about 20 seconds. An apple will appear on the display and the keys can be released. After which, for about another minute, the Apple device will conduct independent diagnostics and completely restart the system.

If this turns out to be useless, you can try to start and disable the silence mode with an interval of 2-3 seconds between presses. Did not help? Then the board may oxidize due to condensation, battery frostbite, and other unpleasant hardware failures.

Stuck loading screen

There are also situations when the iPhone does not start, but the Apple logo manages to light up for a few seconds. This is a good sign - the accessory is alive at the hardware level, but does not start due to a system error. In this case, the software does not work, but you can revive the gadget on your own.

An iPhone with these symptoms does not work due to an incorrectly installed update or a virus program, and you need to rely on these reasons for the breakdown.

Problems with device hacking

There are cases when a gadget turns off due to improper hacking by the owner and crooked pirated firmware. The guarantees immediately disappear and here you can only rely on yourself. So what should you do if your smartphone stops turning on due to software?

Does your phone show charging but won't start? Try to go into Recovery, and if you succeed, most of the recovery task can be considered completed.

This should be done only after complete discharge and reconnection of power.

After complete discharge, the “brick” may show signs of life again, so try not to touch it for several days and let the battery discharge. Do not try to get into the inside of the smartphone, as after disassembling everything can only get worse.

Connected to your computer and the device was recognized? This means you have correctly identified the reason why the screen went dark. The problem is clearly not that the battery has suddenly discharged or the power supply has died.

What to do if the device was not recognized

What to do if the device was recognized, but incorrectly? It's okay, it happens and your next steps are the same in any case. You should launch iTunes and go to Recovery. After this, the program itself will recognize the device and offer several actions to choose from.

Make sure to transfer all valuable information, then click the “Restore” button, which will erase all data and reset the phone to factory settings.

Conclusion

The device can turn into a “brick” if the system is installed incorrectly or an unsuccessful update from the developers. The main thing is not to panic, because any software errors can be fixed on your own! We tried to analyze in detail each of the possible breakdowns and selected the best ways to solve them.