Mi mix global firmware. Xiaomi Mi Mix android smartphone review: an enthusiast's dream? Xiaomi Mi Mix packaging and packaging

Xiaomi Mi Mix 256Gb works under the control operating system Android 6.0. Its performance is rated 5 out of 5 (in its segment). This smartphone is high performance. Here are the characteristics of the device, instructions on how to reset the settings, flash the device and, of course, how to get root rights on Xiaomi

Root on Xiaomi Mi Mix 256Gb

How to get a root for Xiaomi Mi Mix 256Gb see instructions below.

Below are universal programs to get root rights for devices on Qualcomm Snapdragon

• (needs a PC)
• (Root using PC)
• (popular)
• (root in one click)

If the rights of the superuser (root) could not be obtained or the program did not appear (you can install it yourself) - ask a question in the topic. You may need a custom kernel firmware.

Characteristics

1. Type: smartphone
2. Operating system: Android 6.0
3. Case type: classic
4. nCase material: ceramics Control: on-screen buttons
5. SIM card type: nano SIM
6. Number of SIM cards: 2
7. Multi-SIM Operation Mode: Alternate
8. Weight: 209g
9. Dimensions (WxHxD): 81.9x158.8x7.9 mm
10. Screen type: color IPS, 16.78 million colors, touch
11. Type of touch screen: multi-touch, capacitive
12. Diagonal: 6.4 inches.
13. Image size: 2040x1080
14. Number of pixels per inch (PPI): 361
15. Automatic screen rotation: yes
16. Camera: 16 million pixels, LED flash
17. Camera features: autofocus, optical stabilization
18. Aperture: nF/2
19. Video recording: yes
20. Max. video resolution: 3840x2160
21. Max. video frame rate: 30 fps
22. Geo nTagging: yes
23. Front camera: yes, 5 million pixels.
24. Audio: MP3, AAC, WAV, WMA
25. Headphone Jack: 3.5mm
26. Standard: GSM 900/1800/1900, 3G, 4G LTE, LTE-A Cat. 12, VoLTE, EV-DO Rev. A
27. Interfaces: Wi-Fi, Bluetooth, IRDA, nUSB, NFC
28. Satellite navigation: GPS/GLONASS/BeiDou
29. A-GPS system: yes
30. Processor: Qualcomm Snapdragon 821 MSM n8996 Pro
31. Number of processor cores: 4
32. Video processor: Adreno 530
33. Built-in memory: 256 GB
34. Volume random access memory: 6 GB
35. Battery type: Li polymer
36. Battery capacity: 4400 mAh
37. Charging connector type: nUSB Type-C
38. Fast charging function: there is a control: voice dialing, voice control
39. Flight mode: yes
40. n Sensors: Hall, gyroscope, compass, barometer, fingerprint reader
41. Flashlight: yes
42. USB host: yes
43. Announcement date: 2016-10-25

»

Firmware for Xiaomi Mi Mix 256Gb

Official android firmware 6.0 [stock ROM file] -
Custom xiaomi firmware -

Xiaomi Mi Mix 256Gb firmware can be done in several ways. If the firmware file has not been uploaded here yet, then create a topic on the forum, in the section, experts will help you and add firmware. Do not forget to write a review of 4-10 lines about the smartphone in the subject line, this is important. The Xiaomi official website, unfortunately, will not help to solve this problem, and we will solve it for free. This Xiaomi model has a Qualcomm Snapdragon 821 MSM n8996 Pro on board, respectively, there are such flashing methods:

1. Recovery - flashing directly on the device
2. A special utility from the manufacturer, or

What are custom firmware (firmware)?

1. CM - CyanogenMod
2. lineageOS
3. paranoid android
4. OmniROM
5. Temasek's

Xiaomi smartphone problems and shortcomings and how to fix them?

• If Mi Mix 256Gb does not turn on, for example, you see a white screen, hangs on the splash screen, or the notification indicator only flashes at all (perhaps after charging).
• If it freezes when updating / freezes when turned on (requires flashing, 100%)
• Not charging (usually, hardware problems)
• Can't see sim card
• The camera does not work (for the most part, hardware problems)
• Sensor not working (depending on the situation)

Hard Reset for Xiaomi Mi Mix 256Gb

Instructions on how to make a Hard Reset on Xiaomi Mi Mix 256Gb (reset settings). We recommend that you familiarize yourself with the visual guide, which is called on Android. .

Reset codes (open the dialer and enter them).

1. *2767*3855#
2. *#*#7780#*#*
3. *#*#7378423#*#*

Hard Reset via Recovery

1. Turn off the device-> go to Recovery
2. "wipe data/factory reset"
3. "yes - delete all user data" -> "Reboot System"

How to enter Recovery?

1. hold and hold Vol (-) [volume down], or Vol (+) [volume up] and the power button (Power)
2. a menu with the Android logo will appear. That's it, you are in Recovery!

Reset settings on Xiaomi Mi Mix 256Gb can be done in a very simple way:

1. Settings->Backup & Reset
2. Reset settings (at the very bottom)

How to reset pattern

How to reset graphic key if you have forgotten it and now you cannot unlock your Xiaomi smartphone. On the Mi Mix 256Gb model, the key or PIN code can be removed in several ways. You can also remove the lock by resetting the settings, the lock code will be deleted and disabled.

1. Reset graph. blocking -
2. Password reset -

It was introduced in India. This is the second flagship of the company presented in this country, after. As usual, after the Xiaomi smartphone enters the Indian market, a global firmware for it appears. So we have good news for the owners of the frameless flagship, yesterday it became possible to download the global firmware for Xiaomi Mi Mix 2.

Probably many will be disappointed, because this is still not MIUI 9, the global firmware is based on MIUI 8.5. A feature of global firmware is the presence of Google services and many languages.

Where to download global firmware for Xiaomi Mi Mix 2?

The global firmware version for Xiaomi Mi Mix 2 can be downloaded from the official MIUI website at the link. The weight of the firmware is 1.5 GB.

Xiaomi Mi Mix 2 has a 5.99-inch screen with an 18:9 aspect ratio and a resolution of 2160 × 1080 pixels. Responsible for performance is the Snapdragon 835 processor with 6/8 GB of RAM. The amount of internal storage is 64, 128 or 256 GB. Photo and video capabilities are provided by the main 12 MP camera with Sony sensor IMX386 and front-camera at 5 MP. Battery capacity 3400 mAh.

From year to year, a huge number of potential and not so buyers complain about the stagnation in the design of smartphones. It's already hard to surprise someone with a curved screen, a self-healing coating, or two screens.

Among these design solutions, one thing stands apart - a frameless case. The fact is that this is objectively the only feature that the user accepted without rejection. It is not surprising, because everyone wants a gadget with the largest possible screen while maintaining compactness. It must be understood that such a design does not imply a complete absence of frames - such a solution would be impractical and would make the device catastrophically fragile.

One of the first smartphones to share this concept was the Sharp Aquous Crystal, which features extremely thin bezels around the display on three sides. Remember, this was 2014. However, due to their rarity and completely ordinary specifications widespread this model did not receive.

Until recently, no one has brought something more worthwhile to the market than Sharp. And then Xiaomi decided to try her hand, which has recently been pleasing us at interesting prices. But in this case, one frameless design was not enough.

The smartphone was named Xiaomi Mi Mix and was a resounding success among netizens. Rumor has it that the first print run sold out in a matter of seconds, but this still does not guarantee anything.

Specifications of Xiaomi Mi Mix

The characteristics are quite adequate for the flagship of 2016, except that the screen resolution for such a diagonal is modest. You can also note the mass of the device - 209 g, it's almost a tablet. But the most interesting, of course, is not in the characteristics.

Xiaomi Mi Mix packaging and packaging

At first glance, Xiaomi Mi Mix is ​​packaged in an ordinary black box with a matte dust jacket.

In fact, this is a three-section "accordion" with a magnetized lid.

The design is interesting and looks very stylish. All accessories are packed in individual boxes.

Let's look at the package.

It includes the following items:

• Charger;
• USB Type-C cable;
• Documentation;
• Case.

The set is standard. Looking ahead, let's say that the cover here is more of a necessity than a luxury.

It is made of thick soft plastic "under the skin". The inside is carefully lined with velvet. The main advantage is that the case covers all the corners of the device, and also protrudes above the screen, which will come in handy when the device falls flat on it.

Smartphone buttons will also be covered with a thick layer of soft rubberized plastic.

The charger is very typical, it received a vertical orientation and an average weight.

It supports 12V 1.5A fast charging technology.

Detailed instructions for installing the official firmware on Xiaomi Mi Mix (Lithium) through the MiFlash application with an unlocked bootloader.

Drivers and programs

Attention!

To install the official firmware via MiFlash, the device requires .

Installation instructions

Do backups all the necessary data and files and save them to a computer, removable media or the cloud.

Create a folder called "Android" in the root of the C:\ drive.

Disable driver authentication.
Windows 7
When turning on the computer, after loading the BIOS, you must press the F8 key. In the "Advanced Boot Options" menu that appears, select "Disable Driver Signature Requirement". This method may not work the first time, so you should repeat the action or open the command prompt as an administrator and enter two commands:
"bcdedit.exe /set loadoptions DDISABLE_INTEGRITY_CHECKS"
"bcdedit.exe /set TESTSIGNING ON"
Windows 8
You need to press the key combination Win + I, hold down the Shift key and select "Shutdown" > "Restart". When the computer is turned on, select Diagnostics > Advanced Options > Boot Options > Restart. When loading, select the "Disable mandatory driver signature verification" mode by pressing the F7 key.
Windows 10
You need to hold down the Shift key and select the menu "Start" > "Shutdown" > "Restart". Once downloaded, select Troubleshoot > Advanced Options > Boot Options > Restart. Then select "Disable Driver Signature Enforcement" by pressing the F7 key.

Download official firmware to install and unzip the archive to any folder.
It is recommended to use the folder path without Cyrillic characters. For example, "C:\Android\firmware_name".

Connect your phone to the computer with a USB cable.
It is recommended to use an original or good quality cable, and USB port 2.0 located on motherboard(for PC).

Open a command prompt and go to the created Android folder with the command "cd c:\Android\" (commands are written without quotes).

Make sure the computer finds the device via ADB.
To do this, you need to enter "adb devices" into the command line. On the request that appears on the phone for permission to debug via ADB on this computer, you must click "Ok", while selecting the item "Always allow from this computer". If the device is visible, the text "List of devices attached" and a list of all devices (for example, xxxxxxx device) will be displayed. If “offline” is written instead of “device” or the list is empty, then you need to update ADB, check the drivers / cord, change the USB port / computer.

Reboot your smartphone into Fastboot mode.
For this it is necessary in command line type "adb reboot bootloader" or turn it off, then turn it on while holding down the Volume Down key. The screen should display a hare in a hat with earflaps.

Make sure the computer finds the device in Fastboot mode.
To do this, enter the command "fastboot devices". If the answer is “xxxxxxx fastboot”, then the phone is connected correctly. If “waiting for device” is displayed, or nothing at all, you need to check the status of the USB connection or reinstall the drivers.

Launch the MiFlash utility. Then click the "Refresh" button, then "Browse ..." and specify the path to the folder with the firmware. At the bottom of the screen, select "Flash all except storage" to save files in the device's memory or "Flash all" to format internal memory and press the Flash button. The firmware installation process will begin.

After the operation is completed, the phone should reboot itself.
If this does not happen, you need to enter “fastboot reboot” on the command line or hold down the Power button for 10 seconds until the Mi logo appears. Now the cable can be disconnected. After a few minutes, the device will boot up and be ready for further work.

Copy