Quick start Windows thanks to autoload. Start Windows fast thanks to autoload Editing autoload using the program
In this article, you will learn what startup is in Windows 10, where it is located, and how to set up startup programs in Windows 10.
Programs added to startup start immediately after the computer is turned on. Autoload allows you to optimize routine operations (for example, launching Skype or antivirus immediately after turning on the computer) and save time. At the same time, while working on a computer, startup in Windows 10 can become clogged with unnecessary and even malicious programs that will slow down the system. Therefore, it is useful to know how to remove a program from startup.
Editing Startup in Task Manager
First of all, you need to familiarize yourself with the startup list in the task manager. In order to open the startup window in the task manager in Windows 10, right-click on the Start menu and select Task Manager.
If you have not previously entered the task manager, then it will open in an abbreviated form. In order to display its full view, click the "Details" button.
In the advanced mode of the task manager, go to the "Startup" tab.
Tip: You can also open Task Manager by pressing Ctrl+Shift+Esc.
In the Startup tab that opens in the Task Manager, you can view a list of all programs that are in startup (the data is taken from the registry and from the Startup service folder), their impact on speed Windows boot 10 and startup status (enabled or disabled automatic launch of these programs).
State disabled or enabled. Programs configured to start immediately after the start of Windows 10 have an "enabled" status. Accordingly, those programs that should not start immediately after launch have a "disabled" state.
Impact on download speed is low and high. The column allows you to understand how the autorun of the program affects the download speed operating system. If the program selects a lot of resources when Windows starts, then it is better to disable its autoload.
By right-clicking on a program name, you can:
- disable autorun programs in Windows 10;
- open the location of the program;
- search for information about the program on the Internet;
- view the properties of the program startup file.
Adding a program to Windows 10 startup
There are three ways to add or remove a program in startup - adding a program (or program shortcut) to a user folder, editing the registry, or task scheduler. Let's look at all three methods.
Adding a program to startup through a folder
To add program to startup you need to copy the shortcut of the program that you want to run when you start Windows 10 to the Startup service folder. Where is the folder "Startup" on the computer read below.
Windows 10 startup folder location for current user:
C:\Users\username\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup
Windows 10 startup folder location for all computer users:
C:\ProgramData\Microsoft\Windows\Start Menu\Programs\StartUp
You can also open the folder with the Win + R key combination and run the command shell:startup(see screenshot below).
Now copy the shortcut desired program. In the screenshot, I copied the Skype shortcut.
To remove program from startup just remove it from that folder.
Editing Windows 10 Startup Through the Registry
This method of autoload management is suitable for more experienced users.
First you need to open the registry editor. Right-click the Start menu and click Run.
Tip: You can open the Run dialog box with the Win+R keyboard shortcut.
In the window that opens, type the command regedit and click OK.
Two registry branches are responsible for automatically starting programs in Windows 10:
- HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run - for the current computer user;
- HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Run - for all computer users.
In the registry editor that opens, go to the branch responsible for autoloading the current user.
Thus, you can add any program to Windows 10 startup through the registry editor.
Configuring programs to run in the Windows 10 Task Scheduler
To open the scheduler Windows jobs 10 click on the start menu and start typing "task scheduler" as shown in the screenshot below. Click on the program when it appears in the list of found ones.
Tip: You can launch the Task Scheduler with the Win+R key combination by typing askschd.msc in the window that opens and clicking OK.
In the task scheduler window that opens, in the "task scheduler library" section, you can see a list of applications and a schedule for their launch.
As a rule, commands for updating various programs are located here, for example, Adobe Flash Player. But, commands for launching programs at computer startup can also be located here.
Review the programs in this list carefully. You may want to delete some tasks.
In order for the program to automatically start after starting the computer in the task scheduler, click the "Create task" button.
It remains only to specify which program to run at startup. Go to the "Actions" tab and click "Create". Click the "Browse" button and select the desired program. In the picture below, in my example, I indicated the notepad program. Then press the OK button twice.
Video how to add a program to Windows startup
We invite you to watch several training videos that show in detail how to add a program to startup.
Today it is difficult to find an organization that has not been subjected to virus attacks. And although antivirus software is already installed almost everywhere, sometimes it becomes necessary to manually see where in the registry this or that malware starts. When searching for resident malware, we cannot help but worry about the following questions:
The present article is devoted to consideration of these questions.
There are many ways to autoload. We will consider just a few options. I hope this will help you in finding and removing malware from startup.
Registry
In the registry Windows Vista autoloading is presented in several branches:
- Programs that run at login. They run for all users on the system;
- programs that run only once when the user logs into the system. After that, the program keys are automatically removed from this registry key. Programs in this section run for all users on the system;
Programs that run when the current user logs on to the system;
- programs that run only once when the current user logs into the system. After that, the program keys are automatically removed from this registry key.
For example, to automatically launch Notepad when the current user logs in, open Registry Editor(regedit.exe), go to the section:
and add the following key:
“NOTEPAD.EXE”=”C:\WINDOWS\System32\notepad.exe”
Using Group Policy for AutoPlay
Open snap Group Policy(gpedit.msc), go to tab Computer configuration -> Administrative Templates -> System. On the right side of the snap, go to Login(Fig. 1).
Rice. 1. Using group policy for autorun
(for all users)
By default, this policy is not set, but you can add a program there: enable the policy, click the button Show -> Add, specify the path to the program, if the program being launched is located in the ..WINDOWS\System32\ folder, then you can specify only its name - otherwise you will have to specify the full path to the program. At the same time, in system registry In chapter subsection \Explorer\Run is created with the keys of the added programs.
Example
“1”=”notepad.exe”
“2”=”iexplore.exe”
As a result, we get the launch of Notepad and Internet Explorer for all users. Similarly, autorun is set for current users - in the snap Group Policy this is the way User configuration -> Administrative Templates -> System(Fig. 2), and in the registry - the section [ HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer\Run]
Rice. 2. Using group policy for autorun
(for the current user)
Important! At the same time, programs from this list are not displayed in the list of programs available for disabling in msconfig.exe, and are also not detected by all startup managers.
Autostart from a special list
Programs can also be launched from the following registry key:
Options:
- “load”=”programma”- programs that run before the user logs into the system;
- “run”=”programma”- programs that run after the user logs on to the system.
These parameters are analogous to autoload from Win.ini in Windows 9x.
Example
We start Internet Explorer before the user logs in and Notepad after the user logs in:
“load”=”iexplore.exe”
“run”=”notepad.exe”
Don't handle autoplay list for older versions
Computer configuration - Administrative Templates -> System -> Login -> . If you enable this policy, then programs from the following registry keys will not start:
When this policy is used, the following key is created in the registry:
“DisableLocalMachineRun”=dword:00000001
Similarly, the policy for current users is set: User configuration -> Administrative Templates -> System -> Login -> Don't process the startup list of old programs- with the difference that in the registry this option is enabled in a different place:
“DisableLocalUserRun”=dword:00000001
Ignore startup lists for programs that run once
Configurable via Group Policy: Computer configuration - Administrative Templates -> System -> Login -> .
If you enable this policy, then programs from the list will not start:
.
If this policy is enabled, the following key is created in the registry:
“DisableLocalMachineRunOnce”=dword:00000001
The policy for current users is also configured: User configuration - Administrative Templates -> System -> Login -> Do not process the list of one-time launch programs.
Registry settings:
- "DisableLocalUserRunOnce"=dword:00000001
Scheduled tasks
Programs can be started with Task Scheduler. You can view the list of installed tasks, as well as add a new one, as follows: Start -> All programs - Standard -> Service -> Task Scheduler.
This will open a window Task Scheduler, which displays scheduled tasks (Fig. 3).
Rice. 3. Task Scheduler window
To add a new task, you need from the menu Actions select item Create a task(Fig. 4).
Rice. 4. Create a task in the Task Scheduler
You can start programs using this wizard once - when you log on to Windows, when you turn on the computer, and also according to a schedule.
Folder "Startup"
shortcuts are stored for programs that run after the user logs on to the system. Shortcuts to this folder can be added by programs during their installation or by the user himself. There are two folders: common for all users and individual for the current user. By default, these folders are located here:..\Users\All Users\Microsoft\Windows\Start Menu\Programs\Startup- this is the folder from which programs will be launched for all users of the computer;
%USERPROFILE%\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup is the folder from which programs will be launched for the current user.
You can see which programs you run in this way by opening the menu Start-> . If you create a shortcut for some program in this folder, then it will be launched automatically after the user logs in to the system.
Change startup folder
Windows reads the folder path information from the registry. This path is described in the following sections:
“Common Startup”=“%ProgramData%\Microsoft\Windows\Start Menu\Programs\Startup”- for all users of the system;
“Startup”=“%USERPROFILE%\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup”- for the current user.
By changing the path to the folder, we will get autoloading of all programs from the specified folder.
Example
“Startup”=”c:\mystartup”- the system will load all programs whose shortcuts are located in the c:\mystartup\ folder, while the folder will still be displayed in the menu Start, and if the user had nothing in it, then he will not notice the substitution.
Changing the shortcut for a program from the startup list
Let's say you have the Acrobat package installed. Then in the folder you will have a shortcut Adobe Reader Speed Launch, which is installed there by default. But it is not at all necessary that this shortcut refers specifically to the corresponding application - any other program can be launched instead, especially since this will not affect the functionality of Acrobat.
Adding a program to a program launched from the startup list
Modification of the previous version - at the same time as loading any program from the startup list, you will start another program. The fact is that you can "glue" two executable files into one and they will run simultaneously. There are programs for such "gluing". In addition, the shortcut can refer to a batch file, from which both the original program from the list and the added third-party programs will be launched.
You can view the list of automatically loaded programs by opening the program System Information(open Start -> All programs -> Standard -> Service -> System Information or dial msinfo32.exe on the command line) and going to the item Software environment -> Automatically loaded programs. Program Properties of the system displays startup groups from the registry and folders (Fig. 5).
Rice. 5. Startup groups from the registry and folders Startup
Another program that allows you to see a list of startup programs is System Setup(to start, type msconfig.exe from command line). This program, in addition to viewing the startup list, provides the ability to disable all startup items (tab General) or selective programs (tab).
Of course, the information provided in this article cannot be considered exhaustive, but I hope that it will help you in your difficult fight against malware.
It is not a secret for anybody that Internet is the place where people make money: somebody sales, somebody buys… Somebody make money in fair way, somebody in unfair… So remain vigilant all the time while surfing in the Web. Hackers, who have chosen dishonest method of raising money, develop devices to wind trustful users round and rip them off. They up-to-date root kit techniques employ to attack the computer. They do not miss any opportunity to catch the potential victim in their traps. They promote their badware anywhere: on malicious websites, even on decent web pages, which have been hacked before. New malicious products appear almost every day and tend to infect as much computers as it is possible. So we would recommend you to be very careful what links you click and what programs you install.
We feel it is our duty to warn all our blog readers about Windows Command Processor fake antispyware device and help them if they have got into trouble. Now, please, read the short description of how this pest behaves and what bad things in does. It has quite attractive interface; it mimics the behavior of the reputable antivirus programs, so it is quite difficult to determine its trustworthiness.
First, upon successful reaching of the target, Windows Command Processor initiates fake system scanning. This process looks rather persuasive. Upon the termination of such fake checkup, Windows Command Processor generates invented pre-programmed scanning reports. They state numerous threats allegedly detected. It is nothing more like well designed tactic of scaring you. The virus “warns” you to neutralize the suspicious items as quick as possible. It offers itself as an excellent solution for you in this situation, but first it is necessary to purchase its commercial version. Do not let the developers of this malware deceive you. Needless to tell that neither full nor trial version is in state to detect or remove viruses, because it is a virus itself.
Never effect the payment for this badware. Under no circumstances open your private information, your banking details. If by some reasons the payment is already effected, contact your bank or other payment processing company and dispute all charges incurred by you for the benefit of these criminals. What one should do(if his/her machine is infected with this parasite) without lingering is to remove Windows Command Processor scam immediately, at the very first detection. We recommend you to use GridinSoft Trojan Killer for this purpose. If any questions regarding virus removal occur, we are always ready to answer them.
Windows Command Processor automatic remover:
Windows Command Processor removal milestones:
- Through your browser download Process Killer application( pkiller.exe). The download link is
- Save" pkiller.exe” to your Desktop and run it or run this program immediately.
- Once the malicious process ofWindows Command Processor has been disabled (terminated) shut down “ pkiller.exe” (Process Killer).
- Through your browser window download .
- Install, update and run anti-virus software (Trojan Killer).
- Remove all threats it detects during the scan.
- Reboot your PC and repeat the scan in the case of necessity.
Windows Command Processor manual remover:
Delete Windows Command Processor files:
%appdata%\npswf32.dll
%appdata%\Inspector-.exe
%desktopdir%\Windows Command Processor.lnk
%commonprograms%\Windows Command Processor.lnk
Delete Windows Command Processor registry files:
HKCU\Software\Microsoft\Windows\CurrentVersion\Run!Inspectordiv class=”downloadbutton”
Hello dear readers of the site site, I have long wanted to tell you about Windows startup, what can be disabled from it so that it does not appear, as well as so that your Windows startup became much faster!
How to disable startup programs in Windows 7, 8, 10
We will talk more about optimizing Windows startup in the following articles, I also already talked about how to speed up Windows by cleaning it or using it, as well as disabling some services. And today we will speed it up launch, correcting the launch of programs that are loaded automatically when it startup.
There are several ways, and it will be correct to do just a few ways, because. One way can not clean everything. And there is a way three, this is an internal startup cleaning program and a folder in the registry, as well as a special program.
Cleaning startup in three ways.
Method 1. So, let's begin, first way implies itself to clear autostart by internal programs. To do this press start and or the win+r keys. A window will appear in which you need to write and click enter.
The system management program will open, in it open the tab at the top.
There you will see programs that are loaded at system startup. Disable unnecessary ones, just be careful, you should not disable programs downloaded by the manufacturer, because. it could be driver software. After all the steps, click OK.
Also, in order not to miss anything superfluous, it is necessary to start-up look in the folder, usually it is , see if anything is downloading there.
Change startup folder
The startup folder in the registry is located at the following path:
"Common Startup"="%ProgramData%\Microsoft\Windows\Start Menu\Programs\Startup"- all users of the system. "Startup"="%USERPROFILE%\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup"- for the current user.
And there may be more scheduled jobs which you may not need. They are almost in the same Start - All Programs - Accessories - System Tools - Scheduled Tasks. You can also find them in the C:\Windows\Tasks folder. Delete everything you don't need there.
Second way also implies an internal program, but with a different purpose, . To launch it, press start and select execute or click win+r. Enter in the window.
The registry editor will open, by the way, if you don’t know what it is, you can look. Ways autoload in the registry some. Here are the paths themselves:
- all programs. - programs run once by all users. - programs run once by the current user. - for the current user.
Unnecessary programs also delete.
It is also possible add a program to startup through the registry, to do this, for example, go to "regedit.exe"="C:\WINDOWS\regedit.exe"
Editing startup using the program
You can also edit autoload using the Ccleaner utility, which I talked about in the article. In this program, by fast and high-quality cleaning of the computer, there is and autoload editor. By the way, you can download it for free.
Install it, open it and go to the tab on the left Service and . We select a program that is not needed and choose to turn it off (if you want to turn it on later) or delete it if you are sure that it will never be needed in startup.
That's all. There is of course a way to disable group policy, but we will talk about it in a separate article. Now I hope the computer will not keep you waiting 🙂
The computer takes a long time to boot ... A familiar situation. How is it that after installing the system, everything just flies, and then the download takes longer and longer.
The thing is that a clean system is not burdened with so many programs and utilities that we will install later. Moreover, some utilities are registered in autoload without asking us about it. It is understood that we simply cannot do without some, take, for example, an antivirus or a firewall - this is our line of defense.
How to setup?
Let's move on to the most important thing, how to get to the list of these programs and utilities. To do this, Microsoft has developed a very useful utility. msconfig. To launch this utility, press the Win + R key and enter the command msconfig and ok
The window " system configuration and select the tab ""
As you can see, nothing more. The choice of programs that will always be loaded with the system is up to you. It is enough to uncheck the program that you do not need. You can also edit the list of services that start with the Windows shell. To do this, open the tab " Services"
Disable unnecessary services
To disable unused services, just uncheck the checkbox for the selected service. This must be done carefully enough so as not to disable the desired service. A list of services and recommendations for disabling can be viewed.
Disable autoload through the Windows registry
Additionally, the list of programs can be checked and edited in the registry. To do this, press the Win + R key and enter the command regedit
Now we find sections
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\RunOnce
in these sections are programs that run for the current user.
Sections
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnce
here programs that run for all users.
To remove a program from autorun, just remove the parameter with the name of the program.
Conclusion
If you don’t want to deal with startup on your own, you can use special utilities that will show a list of programs in startup and disable them.
Loading...