Update iPhone to factory settings. How to reset all settings on iPhone without a password? Recovery issues

When preparing an iPhone for sale, each user is required to carry out a reset procedure that will completely remove all settings and content from your device. For more information on how to reset iPhone, read the article.

Resetting information from the iPhone can be done in two ways: using the iTunes program and through the gadget itself. Below we will consider both methods in more detail.

Before you move on to erasing your device, you'll need to turn off Find My iPhone, without which you won't be able to erase your iPhone. To do this, open the application on your gadget "Settings" and then navigate to the section iCloud .

Scroll down to the bottom of the page and open the section "Find iPhone" .

Move the toggle switch near the item "Find iPhone" to an inactive position.

You will need to enter your Apple ID password to confirm. After completing this procedure, you can proceed directly to erasing the Apple gadget.

How to reset iPhone via iTunes?

1. Connect your device to your computer using the original USB cable, and then launch iTunes. When the device is detected by the program, click on the miniature device icon in the upper right corner to open the gadget control menu.

2. Make sure you have a tab open in the left pane of the window "Review" . At the very top of the window you will find a button "Restore iPhone" , which will completely erase your device.

3. After starting the recovery procedure, you will need to wait for the process to finish. At the time of recovery, do not disconnect your iPhone from the computer in any case, otherwise you can seriously disrupt the operation of the device.

How to reset iPhone through device settings?

1. Open the app on your device "Settings" and then navigate to the section "Basic" .

Apple technology is very different from Android devices. Gadgets are much safer, but even they start to work incorrectly from time to time. And the easiest way to solve this problem is to reset the settings to factory settings. At the same time, music files, photos, videos, applications, and so on will disappear from the device’s memory once and for all. And if some people think that resetting the iPhone to factory settings is difficult, then for others this procedure is nothing complicated. This article was written for the first category of owners. We will tell you how to return the former performance to your favorite “apple” with and without iTunes.

How to reset iPhone to factory settings

If possible, back up all your files, contacts, and more using iCloud. In other words, you will have to upload the information you need to the cloud so that after the reset it will be possible to return it back.

You need to do the following:

Go to "Settings" using the gear icon on one of the screens;

Go to the "Basic" tab;

Find the “Reset” item there, it is closer to the end of the list;

Tap once and go to the next screen;

Now click on “Reset Settings” or “Reset Content and Settings”.

In the first case, all data will be deleted, but files will remain. Whereas in the second case, you will lose everything and the gadget will be as good as new, as if you had just brought it from the store.

As you can see, there is nothing complicated - the main thing is to know exactly where to find this very reset. But in the end, we saved one more option, which sometimes helps to bring the iPhone back to life.

Hard Reset on iPhones

Imagine that your pet does not start. It doesn't matter for what reason. This may be a “crooked” system update, a forgotten password, and so on. Do not worry - the problem can be solved independently, without resorting to the help of service centers. I would like to remind you that this method can be called hard, because using it you will not be able to save any files.

Before using it, update your iTunes to the final version to avoid problems. So, let's begin:

1. We turn off the power. If for some reason you cannot turn it off by standard means, you should hold the “Home” and “Power” buttons for 5-7 seconds until you see that the gadget has turned off;
2. We connect the Lighting cable to the PC (not to the smartphone, but to the computer);
3. We press the “Home” button and hold it while connecting the previously connected cable to the device;
4. When the iTunes connection screen appears, release the Home button. If the screen we need is not available, we will have to repeat this procedure again;
5. The reset will be completed automatically and the device will work again - not only your data will be deleted, but also previously set passwords.

This does not mean that you can easily use an iPhone found on the street in this way, or, for example, if it is stolen, the password will be reset, only the one that is on the lock screen, and iClaud will remain yours even if you lose it, when The first time you connect to the Internet, you can easily find it on the map using the Find My iPhone application.

Many unlucky users sometimes take the wrong approach to downloading applications for the iPhone. Admiring the abundance in the AppStore, users sometimes load everything on their device without thinking a single gram about the appropriateness of certain programs.

This congestion is sometimes leads to lack of memory in iPhone, and it starts to fail - arbitrarily reboot, hang and "slow down".

If these symptoms nevertheless appear, then resetting the settings to the factory settings will help in this unpleasant situation. This procedure will remove all unnecessary, free up memory and bring your iPhone to its original state. But before resetting the settings, you need to make a backup copy.

Backup copy

Often, users store a lot of useful information on their devices, which many people want to restore when resetting the settings. This information is restored from a backup. There are several ways to make a backup..

1. The first way is to create a backup in the "Overview" tab. You need to go to this section and select the appropriate button to create a copy and click on it;
2. The second way is to make a copy using the AppStore. In the AppStore, go to the "File" section, then in the window that opens, select the "Devices" item, and then in the window that opens, select the "Create a copy" item.

It should be noted right away that restoring all information from a backup copy will not work. Music, games and other software will be lost. iPhone settings, photos, information about calls, it will be possible to restore it. Contacts will also be restored.

Resetting preferences using the Settings menu

In order to reset the settings in this way, the smartphone does not need to be connected to a computer at all. To do this, just go to the iPhone settings, enter the "basic settings" section, and at the bottom of this section select the "Reset" settings item.

After that, the iPhone will offer you several ways to reset. One is the fastest, the second is the longest. Choose the most suitable option and reset. Before a "long" reset, you should recharge your device well.

Reset preferences with iTunes

In order to reset settings through iTunes, you must first deactivate the Find My iPhone feature.

To do this, go to the settings, then select the "iCloud" tab, then select the "Find iPhone" item and deactivate this function in this item. After the Find My iPhone feature is turned off, you should connect the device to the computer with a USB cable, and then take a few steps:

1. Click on the "Device" tab and you will be redirected to the "Overview" page;
2. On this page, find the "Restore ..." button and click on it;
3. Next, you need to confirm the request to restore the iPhone again.

After these simple manipulations iTunes will download everything you need software and bring your iPhone back to its original factory state.

But at the same time, you will be pleasantly pleased with the fact that all your basic information is intact. All SMS, contacts, your notes and more, everything remained untouched. Only "multimedia" will not be saved.

Reset settings using Hard Reset

This procedure is needed in the situation if the owner of the iPhone for some reason forgot the password. Without a password, it is impossible to disable the Find My iPhone function, and therefore there may be serious difficulties in resetting the settings programmatically.

The name of this hard reset suggests that the user is at risk of losing all valuable information. You should resort to this hard reset method only after all other reset options have already been tried and failed.

A hard reset is done as follows:

1. You need to connect the iPhone to the computer and turn on iTunes;
2. The iPhone is then entered into DFU mode;
3. The usual working window of iTunes will change to a very concise one, with just one button. This is exactly what the user should click on.

Hard reset takes a long time. Sometimes it takes over ten minutes.

After a complete reset, you will be prompted to either try to recover the deleted information using a backup, or go through the activation of your iPhone again. Here, decide for yourself what will be more convenient for you.

Conclusion

Resetting the settings to factory settings is sometimes a necessary measure. It gives a full guarantee of restoring the original performance of your iPhone. You should not be afraid of this procedure.

The main thing is not to be lazy, and make backups as often as possible - backups so that all your valuable personal information is always with you, regardless of the number and quality of resets.

Before downloading any program from the AppStore, always make sure that you really need this program, and that it will not take away the entire resource of your iPhone, which it needs for normal stable operation.

How to make a Hard Reset (how to reset the factory settings) of the Apple iPhone 5S smartphone. To do this, we propose the following actions:

soft reset

When performing a Soft reset (soft reset, soft reset) All information in the phone will be saved.
1. Press and hold the "Home" and "Power" buttons
2. After about 8-10 seconds, the Apple logo will appear
If there are no technical problems, the device will start in standard operating mode.

Entering Recovery mode

1. Press the "Home" button and the "Power" button at the same time.
2. Do not release the buttons. The power off slider will appear first, then the screen will turn off.
3. As the device starts to boot, release the "Power" button.
4. After about 15 seconds, the cable image and the iTunes icon will appear on the screen.
5. Release the "Home" button

Entering DFU Mode

The purpose of the DFU (Device Firmware Update) mode is to restore the software of Apple devices. Do not confuse DFU mode with Recovery mode (recovery mode). In Recovery mode, the screen shows a USB cable and an iTunes icon. In DFU mode, the device looks like it is turned off. To enter DFU mode, do the following:
1. Connect your smartphone to your computer
2. Next, hold down the "On / Off" and "Home" buttons for about 10 seconds
3. Release the "On / Off" button, but do not release the "Home" button
4. If the Apple logo appears, then start the whole procedure from the beginning.
5. Hold the "Home" button until iTunes detects a new device in recovery mode (approximately 20-30 seconds).
The device is now in DFU mode and the software can be restored to it.

Owners of "apple" devices regularly look for information on how to reset settings on an iPhone. This solution is suitable for cases where the phone fails for no apparent reason or before selling the device. In the process, errors of the operating platform are removed, if necessary, user files are deleted. There will be nothing complicated in the process, it is important for owners to know how to reset iPhone to factory settings.

Precautionary measures

Now let's talk about how to completely reset iPhone and settings. At the beginning of the process, make sure that the smartphone is charged more than 30 percent, so that during the reset, the device does not run out of power and does not create additional problems. Check if the jailbreak is installed on the device - after the reset, the smartphone may freeze on the home screen. The main thing is to save user files in the cloud, write down names and passwords, copy contacts from the phone book. It is also worth creating a backup copy of settings and applications through iTunes, so that you can quickly restore deleted information later.

To do this, run the program on your computer, go to the "File" section, open the "Devices" tab and click "Back Up".

Reset via settings

Now let's talk about how to reset the iPhone to the state of the factory phone. To get started, go to the phone settings program, and then scroll through the list to the "General" tab. At the end of the list is the "Reset" item. There, the owner will have to choose whether he wants to permanently erase the information from the smartphone, or just reset the settings. We click on the selected method, and then the "OS" will offer to copy the application files to the cloud. If the information is important, then click on "Erase after uploading", if not, then select the "Erase" item. Then enter your Apple account password and wait for the device to reboot.

Reset via iTunes

In order to perform a hard reset iPhone through a computer using iTunes, you need to follow the step-by-step instructions.

1. We connect the device using a cable to iTunes.
2. In the list of identified devices, we find the iPhone.
3. In the window that appears, click "Restore iPhone".

Remember that when restoring a smartphone, the process must not be interrupted in any case, since incorrect completion will lead to the loss of device performance.

Find iPhone

This feature determines the location of the device - a useful thing if the owner is worried about the security of the phone. If you plan to sell the device, then resetting the iPhone to factory settings is not enough, you need to remove the device from the Find My iPhone application. To do this, open the settings menu and go to the iCloud tab. Scroll down to Find My iPhone, you need to turn the switch to an inactive state. Confirm the action by entering your Apple ID account password. After that, wait for an email confirming the deactivation of the function.

Reset via Hard Reset

If resetting the iPhone did not help, then there is another option for deleting user information - hard resetting the device (Hard Reset). To do this, hold down the "Home" button and the "Power" key, hold for 10 seconds and wait for the "bitten" logo to appear. For models starting from the eighth generation, a different principle applies:

• quickly press the add sound button;
• also press the volume down key;
• hold the power button on the device until the Apple logo appears.

There are no restrictions on the number of hard resets by the manufacturer, so the procedure is performed as needed, including to eliminate errors in software platforms and applications. This method is suitable for restoring a smartphone if, after a reset, the device freezes on the boot display.

Smartphone recovery (Recovery Mode)

Sometimes resetting iPhone causes errors that the smartphone is not able to handle without the help of the owner. For such cases, the device has a built-in recovery mode, to transfer the phone to Recovery Mode, follow the step-by-step instructions.

1. Turn off the iPhone, having previously charged it by 30-50 percent.
2. Press the Home key.
3. Using a special cable, connect your smartphone to a personal computer. The Home key should remain pressed.
4. Wait for the iTunes program icon and the drawn cable to appear.
5. Launch iTunes on PC and find your connected device.
6. In the window that opens, click the "Restore iPhone" button.
7. Wait for the process to complete.

Do not disconnect the smartphone from the computer during recovery, otherwise only the masters in the service center will be able to “revive” the smartphone.

Reset iPhone if you forgot your passcode

If the owner did not write down the password before resetting the iPhone, then the device is likely to be blocked. But you should not panic, a forgotten password is not a sentence. In such situations, you should use the DFU mode.

1. Connect your iPhone to your computer using a cable.
2. Turn off your smartphone completely.
3. Hold down the power button and go to the home screen.
4. After 10 seconds, release the Power key and continue holding the Home button.
5. Open iTunes and wait for a message that your computer has recognized your phone.
6. Click "Restore iPhone" - DFU mode is perceived by the computer as a recovery mode.

Do not turn off the device, although the smartphone will not show "signs of life". Just wait for the recovery process to complete. If there is no self-confidence or there is a fear of damaging the smartphone, then contact the service center - the masters will quickly erase the information, and it will not take much time.