Tired of Windows XP updates? how to turn off updates in windows xp how to turn off updates on windows xp

When working on a computer, there are often some problems. Of course, when fixing them, many have difficulties, occasionally they are associated with unsuccessful updates. Therefore, now let's take a closer look at how to disable Windows XP updates. You can permanently disable operating system updates by launching the Control Panel, and then going to System and Security - Turn automatic updates on or off. A window will open where, in the Important updates section, select Do not check for updates (not recommended). If you are not so strict about updates, you can choose a softer option, for example, Download updates, but the decision to install is made by me.

Initially, before the update itself, create a restore point, which will help in case of any problems, return the system to its original state. To do this, open: "Start"; "All programs"; "Standard"; "Service"; "System Restore". Then, select "Create a restore point" and click "Next". A window will appear where you should write the name of the created point.

After the update, the system may slow down. In this case, open: "Start"; "Control Panel"; "Installation and removal of programms". Don't forget to find the item "Show updates" and check the box there. As a result, you will have a chance to remove the installed updates. If this is not successful, then try to restore the early appearance of the system using the created checkpoints.

Remember that even if you did not create points, they are still there. Since the system automatically creates them when installing programs, drivers, etc. Find the days recovery window where the points are set. By clicking on the desired item, carry out the procedure for the recovery itself. The sad fact is that often this does not bring positive results. Therefore, I advise you to take the installation disk and use it to reboot and start the system in recovery mode. The advantage is that your personal files will not be affected, and the modified files will be replaced with the original from the disk.

Another recovery method is proposed, which involves reinstalling the operating system in update mode. Your actions, in this case, are as follows: boot the computer, and then insert the disk with the OS. Select Install Windows from the menu. When a new window appears, select "Update", then all personal settings, various programs and documents will be saved.

In conclusion, I would like to note that failures can always occur. Therefore, before disabling Windows XP updates, check and save important documents to external media or to another drive. Good luck!

Hello dear readers. In this article, we will talk about how to properly disable automatic updates on Windows 7, Windows 8, and of course, we will not forget to see how this can be done on the good old Windows XP. Of course, automatic updates are a useful thing that was invented so that Microsoft programmers could remotely help the user deal with various errors. The help itself consists in automatically downloading and installing a ready-made set of files that will replace or supplement the problem areas of your operating system.

As practice shows, the victims of such inconveniences and malfunctions are mainly users who use non-licensed Windows or some kind of assembly. Therefore, more and more often when setting up counterfeit software, wizards and system administrators immediately disable the Windows Update service. To avoid any trouble in the future.

For those who have a license, I personally recommend leaving automatic updates enabled. Very rarely, there are such cases that the OS stopped working precisely because of updates, and even vice versa, after installing them, the system starts working faster and better at times. But, this does not mean that such users should in no case be allowed to turn off automatic updates. For example, I was sometimes asked to turn off the update only because a person was annoyed by the fact that after turning off the computer, he had to constantly wait until everything was installed and configured.

So be sure to read this article so that you know in the future how to disable updates on Windows, even if you have a full-fledged licensed Windows 7 or 8.

Turn off automatic updates on Windows 7

So, let's start with the most popular OS, namely Windows 7.

The first step, as always, is to enter the " Control Panel", where we find the icon with the name " Update Center».

By clicking on it, we get to the settings window where in the additional parameters, which is located on the left side, select the item " Settings».

Next, in the list of installation methods, going to the first option " Important updates", click on the arrow, a small list will appear with different values in which we select" Do not check for updates". From the remaining items, you can also safely remove the checkmarks. And to complete the work with the settings, click on the button " OK».

But that's not all, just in case, we also disable the update center service. This time, when starting the "Control Panel", select "Administrative Tools" -\u003e "Services".

In the list that opens, go down to the very bottom and double-click on the line with the name " Windows Update».

We get to the service settings window. Now in the startup type line, select "Disabled", and In "Status" click on "Stop".

By doing this, you will completely disable automatic Windows updates. But, once again, it is better to do this only in exceptional situations, for example, if you have any problems related to Windows updates. But, you should not disable updates just because sometimes you have to wait a long time until the system is updated or you get bored and decide to change something in setting up your system.

Disable Automatic Updates in Windows 8

Disabling updates in Windows 8, similar to the seven. Because these two systems are very similar to each other. If you use the control panel to disable, then you can safely read and follow all the steps from the previous option.

But, for those who do not like it, in Windows 8, you can use another option. To do this, we need to go to "Start" (Metro) and in the search start typing the phrase " disable automatic update” and then click search in applications. As a result, a shortcut should appear that is responsible for configuring system updates.

By clicking on it, the settings menu will open, where we, like the previous time in the “Important updates” item, set the value “Do not check for updates”.

To disable the service, you can use the instructions that I wrote for Windows 7.

Disabling updates on Windows XP

There is nothing new in Windows XP. We start from the control panel, where we are looking for "Automatic updates", where in the properties that appear, check "Disable automatic updates" and save the settings by clicking on "OK".

Similarly to other operating systems, do not forget to disable the update service. So, go to "Administration" -> "Services". And we find there "Automatic update".

Double-click to open it, and there we stop the service with the "Stop" button, and instead of "Auto" we set "Disable". This is done so that the service does not start the next time the computer is turned on.

Thanks to these actions, you can easily turn off all the cars. updates on the computer. But, personally, I recommend turning them off only as a last resort, and then, after solving the problem, be sure to return everything back.

How to disable automatic updates

What reason can make a PC user think about disable Windows XP update And Windows7?
The reasons may be different, and now I will list them for you:

limited traffic;
internet speed is very slow. If the user updates Windows, he will not be able to open web pages normally due to low speed;
someone is constantly annoying a pop-up window asking you to reboot. This window pops up after every Windows update;
pirated version of Windows.

So, we briefly considered several cases in which it is worth disabling Windows Update, now let's move on to the basics.

To disable automatic updates on windows xp, do the following:
1). Click "Start" => "Control Panel":

3). The system properties window will open in front of you, go to the tab there "Automatic update" and click on the switch in paragraph "Turn off automatic updates". Don't forget to click on the "OK" button:

To disable updates on Windows 7, follow these steps:

1). Click "Start" => "Control Panel":

2). A window will open titled "Customizing Computer Settings". In the "View" item, select "Small Icons" to make it easier to find "Windows Update":

Enlarge image?

3). A window will open "Windows Update". Next, on the left side, click on the item "Settings":

4). Now find the point "Important updates" and choose from the proposed list "Do not check for updates (not recommended)". Click on the "OK" button:

I hope the instructions I wrote for disable automatic updates in Windows XP And Windows 7 was extremely clear.

Good luck!

Back in the Windows XP operating system, developers introduced a special service that was responsible for periodic updates. They were automatically downloaded via the Internet from Microsoft servers to the user's computer, and the system determined whether to install them at the user's request or automatically. Consider why they are needed, and how to disable Windows 7 updates.

What are they needed for

According to the creators of the system, fresh updates have a positive effect on the operation of its program code. They specifically work to improve and optimize the operation of computer processes in the system. As a result, all efforts are designed to increase performance. The computer should become more responsive, and various flaws and errors should disappear. More often than not, updates also provide new features:

improved diagnostic and troubleshooting tools;
supported by modern peripheral equipment;
new functions are added to the system;
patches for the Windows security system and other usefulness are added.

For those who have a licensed Windows system, installing such updates, as a rule, does not threaten anything.

But, based on the bitter experience of many computer owners, these updates are only needed if they are able to bring real benefit. But who among ordinary users will be able to determine in advance the usefulness of the improvements proposed by Microsoft. If some game or program is unstable in this operating system, then it will tell you which updates are needed. But when the computer works reliably, stably and does not give out unexpected glitches, then what's the point of updating if it already works smartly. As the admins joke: “it works - don’t bother”, but it’s better to completely disable Windows 7 updates. Often they can cause a lot of problems. Why take the risk, and if you're lucky.

Why would you need to disable

There are several reasons for the question of how to disable automatic updates in Windows 7:

The user has a pirated version of the operating system. And if you completely disable the update, the risk that the Microsoft server will issue a “red card” and limit the functionality of the operating system for using unlicensed Windows 7 is just reduced to zero.
It is not uncommon for an updated system to unexpectedly generate a critical error that only a full recovery can fix, and it is clearly too late to ask how to disable Windows 7 auto-update.
The small size of the system drive, most often it is the "C" drive. And since the packages with fixes are very voluminous, the free space instantly disappears. Therefore, it becomes simply necessary to disable automatic updates on your computer.
The need to wait for the computer to turn off after an update in Windows 7. Those who updated faced a situation where they needed to turn off the laptop, and a warning appeared on the monitor screen that this should not be done, because “updates are being installed on Windows 7 1 of 1235 "! And the user must choose either an updated system or a deep sleep. Here you will inevitably think about how to prohibit the system from updating.
If the Internet is limited in incoming and outgoing traffic. For such users, the question is also relevant, how to disable automatic updating of Windows 7.
If the Internet channel has a low speed, then it is better to disable this service in Windows 7 forever.

If at least one of the above reasons is relevant for your system, then it is better not to look for Windows 7 updates.

Well, now about how to disable updates. There are two ways. Let's consider each of them separately.

Disable completely

Before turning off Windows Update 7, it is necessary to find management service. Consider the sequence of actions:

After this service is completely disabled, the system will not be updated. But if you want to receive Windows 7 updates, if you carry out all the steps again, you can restore full functionality by changing the settings.

Disable only automatic update

If you want to reserve the right to manually download and install updates yourself, you can limit yourself to disabling automatic search.

Let's see how to do it:

Now the system will search for updates, but will not automatically install without the user's permission. The owner of the computer can manually download updates from the Download Center at any time by clicking on the button Check for updates.

Disable system notifications

After the actions taken, the system will not search for updates and install them automatically. But that is not all. Since this is a negative event for Windows 7, it will still remind you of this with a flag with a red cross in the right corner of the monitor.

Let's turn off this reminder of the changes made:

Now the red cross has disappeared and the operating system does not display reminders.

But nothing prevents you from updating manually if you wish. It is enough to start the search for Windows 7 updates again.

Conclusion

Finishing this short description of why you need to update the system, and how to disable the update service, we want to remind you that each user can install the update manually, as well as disable the update service completely or partially. We hope these short instructions will help you. They are quite simple, but will keep the computer working for a long time.

How to disable Windows XP update

So, to disable the Windows XP update, go to the system properties, to do this, right-click on the shortcut "My Computer" and select "Properties".

In the window that opens, select the "Automatic Updates" tab and here, as it has already become clear, put a tick on "Disable automatic updates". All. Then click "OK" and enjoy Windows without updates.

Perhaps, after disabling the system update, the antivirus will yell. These messages of his can be safely ignored, since we have already disassembled and understood that the automatic updating of Windows XP is a completely useless thing, like flip-flops in a downpour.