Tele2 your phone number. How to find out your number on Tele2? Call to the Tele2 customer service center

Perhaps, everyone got into an awkward situation when they asked you for your phone number, and you could not answer, not for the reason that you did not want to share your number, but because you did not know it. Yes, there is little sadness in this, because in fact there are many ways to determine your phone number from the Tele2 operator.

It is with the help of the methods outlined below that you can quickly determine it without remembering your cell number. Also, for this you do not need to be a special connoisseur or literate, you just need to delve into the following, in fact, these are simple mechanical actions that are much easier to remember how to do than to remember your phone number.

How to determine your number

The first method is the simplest and most banal, because it is enough to write it into the phone book once, it is advisable to do this immediately after the purchase, as soon as the SIM card has been inserted, add it to contacts and in the future simply look for it from there. It takes a matter of seconds.

The next way is a simple call to a friend who will tell you your number. To do this, you can use absolutely any phone that is at hand. After all, during the call, your contact will be displayed. Thus, it is possible to determine only those starter packages on which the “ ” service is not installed.

The third way is to send a free message "". It will also work in the case when you have the above service, since its effect only applies to calls, but not to sending SMS.

Perhaps the easiest way is to use the USSD request by typing it on your mobile phone *201# and press the call button. after completing this action, your mobile number will be displayed on the mobile phone screen. This feature is available to all existing Tele2 subscribers. Pata is not taken for using it.

Do not forget about the call to. Where polite technical support staff will answer your question and provide any information, including your number.

How to activate the Tele2 SIM card

After buying a phone and a starter pack, not many users know how to activate their card and use it in the future. So, initially it must be removed from the package and installed in a mobile device (phone, tablet), after which it must be launched. Usually, you will immediately be prompted to enter a PIN code.

It is indicated on the plastic holder or on the packaging of the starter pack. After entering the PIN code, the phone will start. You can check the connection with the base station by the indicator, which is indicated in the corner of the phone. The more sticks, the stronger the signal and the better the connection, respectively. After that, you need to make the first call to any number, followed by your phone. (jcomments on)

I don’t know about you, but for me, basically, the need to find out your phone number does not arise immediately after buying a new SIM card, but when you use it for a week, and you are going to replenish your account on your mobile phone balance for the first time. And then - OOP! You don’t even know the numbers… Have you ever had this happen?

And there are other situations. For example, when you suddenly decided to resume using a long-abandoned SIM card, but you don’t know how to find out the TELE2 SIM card number.

And in general. It is not at all surprising that many people simply do not remember their own phone number. Even when used for quite a long time. It is quite normal that for many, remembering your own number is not even a problem, but simply an unnecessary luxury. Since we ourselves very rarely call him.

In general, sometimes you still need to know your number. At least in order to replenish the balance.

So how do you find out your TELE 2 number if you suddenly forgot it? There are several ways at once.

How to find out your TELE2 number on your mobile

Method one. There is a USSD command to find out your tele2 number. Or a USSD request - as you like.

To find out your Tele2 number on your mobile phone, you need to send a USSD request ✶201#

In response, you will receive a message with your phone number in international format.

How to know your TELE2 number on the modem

Now let's find out how to see your number on phone2 if your SIM card is installed in a USB modem. That is, you use the SIM card only to access the Internet.

To find out your number, you will need to go through a simple path of various actions:

— connect your modem to a personal computer,
- run the program on the computer TELE2.Modem”, which is most often automatically installed when the modem is first started.
- in the menu, select the item " Actions» and subparagraph « USSD string»,
- in the window that pops up when you select this sub-item, type ✶201#, and press the call button. In response, you will be sent a text message with the Tele2 SIM card number

Most likely, these manipulations will help you.

And already at this stage, other methods will simply cease to be interesting, since this is the most reliable and easiest of the existing methods of how to find out my TELE2 number.

Well, for those who are especially curious, we will also give

Other ways to find out your Tele2 phone number

It's rare, but crashes do happen. And the methods discussed above may not help you for some reason ... Well, then. Then you can also try this:

Call operator Tele2. And explain that all you want from him is to find out my TELE2 number. Yours is more accurate. True, in this case, you will most likely have to give your personal data. To prove that you are the subscriber himself.

Also available on the official website of Tele2 service Tele2 guide, where in the section " My Tele2» has all the information about the subscriber's number.

In addition, sometimes the phone number is automatically stored in phone book your phone. Therefore, it is worth checking your phone book or phone settings, where there may well be an item “ Your number' or something similar.

How to find out your TELE2 number on iPad?

For iPad owners, the question of how to find out your TELE2 number is especially relevant. Since the iPad does not have a phone book or the ability to send SMS.

However, everything is much simpler than it seems at first glance.

The point is that already in the iPad settings themselves, the Tele2 number used must be indicated.

And in order to recognize it, you will only need to go to the iPad settings menu, and in the item " Main» find subitem « About device". There in the column Cellular data number x" is the number of the SIM card installed in the iPad.

If suddenly, for some reason, you failed to find out your iPad number on the TELE2 SIM card in such a simple way, then you can use other methods:

- use special iPad app for sending SMS. This is a simple way that allows you to subsequently send an SMS and use the standard services of Tele2, or send a message to another mobile phone,
— remove the SIM card from the iPad and insert it into any other mobile phone from which you can easily send USSD request or call the operator Tele2.
- use the application for iPad from your operator, which will allow you to access all the personal data of the subscriber.

As part of the observance of elementary precautions, it is still not worth it to find out your tele2 number to use various Internet services that are not official to find out your number. In addition, we strongly recommend that you do not download programs from the Internet that may contain dangerous content or viruses that harm the OS.

Often, subscribers are faced with the problem of not knowing their own number. The problem is especially acute when you need to dictate your number to someone. Basically, this problem is faced by new subscribers of the operator who have only recently purchased a SIM card. Of course, the numbers can be seen on the box in which the SIM was located, but in most cases, subscribers throw away the box or simply do not have time to look for it. In this case, we will tell you how to find out your number on Tele2 in this review.

USSD command to check your number

The most popular verification method that allows you to find out your number on Tele2 via a mobile phone is dialing the USSD combination: * 201 #. Immediately after sending the request, a notification will be displayed on the screen of the mobile device: “Your federal number is 8 xxx xxx xxx xxx”.

Sending such a command is free of charge and has no restrictions on the number of requests. Even if you are in another city or abroad, you can send a Tele2 USSD command and find out your number for free, even with a zero balance.

Advice: After receiving a notification with your number, save it in the phone book in the "Contacts" section. This will help you even when you are on the road or in an area where there is no connection, as it only works when there is a connection.

Other ways to check your number

If commands are not sent on the mobile device, then you can get the necessary information in the following ways:

call a friend

If there is a friend near you who has a mobile phone at hand, just call him. On the mobile device of a friend, 11 digits of your number will be displayed, which you can rewrite for yourself or remember. However, if you have previously activated the "AntiAON" service, then this verification option will be useless, since the service hides information about the caller.

Sending an SMS message asking for a call back

Each mobile operator has a service that subscribers prefer to call a "beacon". At the operator, this service is called "Call me." Having sent such a “beacon” to a friend, he will receive an SMS message asking him to call you back. The message will include a phone number to call back. To send a beacon, dial the command: * 118 * subscriber number #. This option works even if the AntiAON service is enabled.

Checking through the "Tele-Guide"

Open the Tele2-Guide service on your mobile device by command * 111 #. The service contains all reference information, including information about the SIM card, tariff plan, as well as information about various options and subscriptions of the company.

Checking in the Personal Account

This service allows you not only to check the information about the SIM card, but also to find out your tariff plan, check the balance, view connected options and activated subscriptions, and much more. An Internet connection is required to access the Personal Account. This verification method is available around the clock for Tele2 subscribers.

Call to customer support

Call the internal telephone of Tele2 - 611 and switch to the operator by pressing zero. Next, ask the operator to voice information about your SIM card. The company's specialist will answer any questions and provide information of interest.

Information on the box

Still, do not forget that a SIM card is always purchased in a box, on the front side of which the phone number of the embedded SIM card is indicated. The box, in fact, as well as the plastic to which the SIM card is attached, should not be thrown away, as information that may be useful is indicated there. For example, if the operator's product is blocked, then you will need to enter a PIN or PUK code. In the same way, you can find out your Tele2 number, even if the SIM card is blocked.

How to find out your number on modem devices

You can get information about the SIM card on a USB modem in the following ways:

1. Connect your device to your computer
2. Launch the Tele2-Modem application, which is activated automatically after connecting the modem to the computer,
3. In the application, open the "USSD string" section,
4. In the line that opens, enter the command * 201 #.

In this way you will receive all the information you are interested in. You can also remove the SIM card from the modem and insert it into the phone by sending a USSD command from the phone. This method is less convenient, but applicable if it is not possible to send a command through the Tele2-Modem utility.

Sometimes it happens that you need to dictate your phone number to someone, but you forgot it or did not have time to remember it yet. In this case, there are several options to find out:

1. Using the USSD command

Each mobile operator has the opportunity to find out their number using a free command. To find out your number, dial *201# and press the call button. After that, an inscription with your number will appear on the screen of your phone: “Your federal number is +79000000000”. This is a very simple and convenient way. It is not necessary to memorize a long number, it is enough to keep this combination *201# in mind.

2. With the help of a friend

This method is quite simple if you have the phone number of a friend, girlfriend, sister, mother, colleague and so on in your contact list. That is, any phone number of your friend. You call him, your phone number is displayed on his screen and he dictates it to you.

Or, if you have 2 phones, you can call your second number and see the phone number on the screen.

This method is universal and suitable for the user of any mobile operator.

3. When connecting the tariff

When you connect the tariff, you are given a package with a SIM card, information about the tariff with various booklets, and so on. And if you have not had time to throw away these documents, then take a closer look, and on one of them you will see your phone number.

4. SMS message

Each operator has a "Beacon" or "Call me back" service. TELE2 has such a service and in order to use it, you need to dial the command * 118 * subscriber number # call button. The subscriber's number is the phone number of your friend or acquaintance to whom you are sending this message. After sending the message, your interlocutor will receive an SMS with a request to call back, where your phone number will be indicated.

Or there is another option to find out the number by SMS without sending commands, but simply by writing to a friend: “Hi” or with any other text. The interlocutor will receive a message and your phone number as the sender will also be displayed there.

5. Call to the operator

You can find out your phone number by calling the TELE2 contact center at a short phone number 611 and call button.

The operator needs to be informed that you want to know your phone number and this information will be provided to you within 1-2 minutes.

Here are some fairly simple ways to find out your phone number. We really hope that one of the ways will be useful for you.

Remembering your own phone number, especially if you have several SIM-cards or change the operator, is not immediately possible. Nevertheless, it often becomes necessary to dictate the number to the interlocutor, enter it or indicate it in any document. In such a situation, you can find out your number through short and convenient USSD commands by dialing a certain combination of numbers.

Find out your Tele2 number by command

With the help of a convenient service using USSD commands, any Tele2 subscriber can find out his number.

To find out your number, you just need to enter the following command:

Literally within a few seconds, a message will appear on the phone screen: “Your federal number is +7 xxx xxx xxx xxx”.

Obviously, it is much easier to remember a short USSD command than an 11-digit sequence of digits, which makes such a service that allows you to find out your number convenient and in demand for the subscriber. A significant bonus is the ability to use the service in any region of the country, and it is completely free.

call a friend

Another simple and quick way to find out your Tele2 number is to call a friend, as the information of interest will be displayed on the screen of his phone. It should be remembered that this method will not give the desired result if the “AntiAON” (“Anti Caller ID”) service is activated on the subscriber's phone. In this case, the phone number information is not displayed during an outgoing call.

Free message

Even with the AntiAON service turned on, you can use the help of a friend. To do this, you need to send him the so-called "beacon", which is a message asking him to call back with the obligatory indication of the phone number. A similar service is called "Call me" and can also be used for free.

Call to the operator

Another option for obtaining information about the connected SIM card is to contact the support service, which works for Tele2 subscribers around the clock. In order to contact the call center operator, you need a number 611 . Then you need to wait for the answer of the support service employee and explain the problem to him. After that, the operator promptly inform the subscriber of all the information of interest to him.

Starter pack

Of course, do not forget that there is another extremely simple option to find out the cell number. The necessary information is always indicated on the packaging of the SIM card purchased by the subscriber. This is the main reason why you should not throw away the starter pack, since with its help you can always find out your own phone number.