iPhone activation. How to independently set up an iPhone for full-fledged work. iPhone does not turn on: what to do New iPhone first turn on

For an experienced user, the operation of Apple gadgets seems obscenely simple, because following the precepts of Steve Jobs, Cupertino developers make most of the operations required from the user intuitive. However, Apple devices are used not only by teenage geeks who grew up in the digital age, but also by the older generation, as well as children, blondes and other unprotected segments of the population.

How to turn on a new iPhone

Usually new iPhone is in the box in the off state with 40-60% battery charge.

Naturally, the device from the store should start with a half turn, that is, after the usual start-up procedure, which is performed by pressing and holding (for a few seconds) the power button. This button is located on the right side of smartphones with a screen diagonal of 4.7 / 5.5 / 5.8 / 6.1 / 6.5 inches (iPhone 6 / 6 Plus, iPhone 6s / 6s Plus, iPhone 7 / 7 Plus, iPhone 8 / 8 Plus, iPhone X, iPhone XR, iPhone XS / XS Max) or on the top of earlier iPhones (iPhone 2G, iPhone 3G, iPhone 3Gs, iPhone 4, iPhone 4s, iPhone 5, iPhone 5c, iPhone SE) .

How to turn on iPhone or iPad if it won't turn on

If the iPhone or iPad refuses to turn on, then four possible reasons should be considered:

The device is empty. Perhaps the iPhone or iPad has been gathering dust on the warehouse shelves for too long and managed to completely discharge, which should be evidenced by the image of the battery, the Lightning connector, and the lightning bolt icon on the screen. The solution is to connect the gadget to the power adapter and the mains;

Low temperature. If you live in Norilsk or Vorkuta and try to turn on the iPhone outside at -30 degrees, you will hardly achieve a result, because when the battery electrolyte thickens, the smartphone automatically turns off.

The solution is to warm the device at room temperature;

The slowdown in the speed of the iPhone is the scourge of all owners of "apple gadgets". Most of all, the problem hits users who are used to actively using the device and using hundreds of programs. To increase the speed of programs on the iPhone, you can use special programs that help set up iPhone like new.

To start work on the iPhone, you need: after operations, all data (video, photos, music, contacts) will be erased, and no one wants to lose memories of significant moments of life and restore an extensive list of numbers.

Using the algorithm described in the article, you can increase the speed of both iPhone and iPad.

Preparing an iPhone or iPad

Before accelerating the iPhone, the device must be prepared for the procedure. This is done as follows:

1. iOS update to latest version . The smartphone must have current version operating system. If for some reason this has not been done before, then you need to go to the "Software Update" section ("Settings" → "General" → "Software Update"), check installed version iOS and, if necessary, download and install the update. If your iPhone is working with Jailbreak, iTunes will be required to update the operating system.
2. Backup copy. There are several ways to back up your smartphone:

• via iTunes: you need to connect the phone to a computer, select a device in the list available in iTunes, activate the "This computer" switch, click the "Back up now" button, after completing the procedure, go to "Devices" and see if a backup has been created;

• via iCloud: you need to go to the "Backup" menu ("Settings" → iCloud → "Backup") and click the appropriate copy.

1. Mute messages. Turn off iMessage before speeding up iPhone. To do this, you need to find the "Messages" item in the "Settings", go into it and press the appropriate key.
2. Disabling Find My iPhone. The device search program at the time of device acceleration should also not work. Disabling "Find iPhone" is carried out through the "iCloud" item in the smartphone settings.

Having completed all the preparatory work, you can proceed to the next stage of work - cleaning the device.

Clear data on iPhone or iPad

How to clean the device, you can learn more in our article (to factory settings) or briefly, using the following steps:

1. . You can roll back the iPhone to the original version using the "Reset iPhone" button ("Settings", item "General").
2. Removing settings and content. On the this step you need to select the "Erase content and settings" button.
3. Confirmation. iPhone does not delete data immediately after pressing the keys: to start the cleaning process, you need to confirm the choice.
4. Expectation. Before you set up your iPhone, you need to wait until all the information is deleted - this takes a few minutes.

If the cleaning process is completely correct, there will be no information left on the iPhone (apart from system information), and the device will display a welcome message on the screen. Did you do everything right? You can move on to the most important thing - setting up a smartphone / tablet.

Setting up iPhone like new

1. Select the item "Set up as a new iPhone" (appears in the greeting after clearing the smartphone of information).
2. We skip identification through Apple ID (this is necessary so that the phone settings saved in iCloud are not transferred to the device).
3. We complete the process.

Today, the iPhone is super popular and in demand. Its excellent screen, which gives an incredibly high-quality picture, has conquered millions of users. Practical design, popular interface, convenient applications will not leave you indifferent to this crowning creation of Apple. But what to do if even such a perfect device has problems. For example, it just won't turn on. In this case, it is very important to correctly diagnose the cause. Only then act.

First of all, you need to diagnose problems

We will describe the most common causes of problems and tell you what to do.

When the iPhone looks at you with a blank, black screen - do not rush to panic. This doesn't mean it's over. Most likely, the reason is that the battery is completely discharged. The second reason may be a frozen iOS. Repairing the device is easy. The main thing is to do exactly what we tell you.

If the reason that the battery is low is the long stay of the iPhone in the cold, then first you should warm your device in your palms. Then connect the device to the charger for fifteen minutes. If the reason for a non-working iPhone is a dead battery, it will turn on soon. If this does not happen, it may be that the hung iOS is to blame. Then you need to press the HOME and POVER buttons simultaneously and hold them for ten to twenty seconds. Soon you will see that an apple is lit on the screen. Release the buttons and after about a minute, iOS will launch.

If in this case the long-awaited apple does not burn, we will tell you what to do. You need to turn on / off the silent mode on the iPhone two or three times in a row. Then connect the charger for fifteen minutes. This operation, as a rule, always gives a positive result.

If these steps are unsuccessful, try changing the charger and cable. Perhaps they are the culprits that the iPhone does not turn on. If, moreover, you are not using the original, but a cheap Chinese fake, this may be the reason.

2. If the buttons do not work

There is also the following option: the iPhone does not respond to button presses, and the screen of the last application freezes on the screen. The first thing to do in this situation is to reboot the device in forced mode. To do this, simultaneously hold down the "Sleep" / "Wake" and "Home" buttons, and after ten to fifteen seconds you will see that the apple is lit on the screen again.

It happens that the device still does not turn on. Then you should connect to the charger and leave the iPhone to charge for fifty to sixty minutes. Soon you will see that the charging screen is lit. If this does not happen, check the connector socket, charger and cable carefully. Perhaps they are the reason. Try the same procedure with another source of battery power.

3. If the iPhone does not turn on, but the apple is constantly on

Another unpleasant situation that is often found among users of the iPhone 4S, iPhone 5S - the apple on the screen either lights up or goes out. In this case, do not test your nervous system for strength. Most likely, there was a failure when restoring iPhone from a backup. What should be done in this situation? You will be helped by the recovery mode and the computer on which iTunes should be launched first. Then connect the USB cable, but for now only to the computer. Your next action is to turn off the iPhone completely, getting rid of the apple, which is still on and off. To do this, hold down the "HOME" and "POVER" buttons. Next, hold down "HOME" and connect the USB. This should be done until the iTunes logo appears on the screen and next to it is the image of the plug. You will see an inscription on the screen that the recovery mode is working. All you need to do in the future is to click the "Restore" button.

4. If all methods fail

What to do if you tried everything, but the apple did not appear on the screen of your iPhone? There is a special recovery mode - DFU. It is designed to restore the iOS firmware in the event that all your other attempts have failed. Let's say right away that this mode should be used only as a last resort, because when it is activated, all data from the iPhone will be lost.

So, first you need to connect to the charging for five to ten minutes. After connecting to a computer, check if the device is found in iTunes. If this does not happen, go to DFU mode: simultaneously hold the "HOME" and "POVER" buttons for ten seconds, then release "POVER". Next, hold the "HOME" button for fifteen to thirty seconds until iTunes writes "Recovery Mode". Do not expect further that the screen will thank you and show you, as usual, an apple. Evidence of a successful entry into DFU is the absence of any image on the screen. If you want to restore the firmware in iPhone, find the "Restore iPhone" button in iTunes. To exit this mode, simply disconnect the cable from the device and press "HOME" and "POVER" for ten seconds. After these manipulations, the iPhone should reboot.

5. A service center will come to the rescue

If, despite all the efforts, it was not possible to reanimate the iPhone on its own, you will have to seek help from specialists. But remember that only with proper handling, your favorite gadget will serve you faithfully for many years.

The genius of some people is simply impossible to deny. What is Jobs worth, who set a new standard for the whole world, in terms of mobile devices. Not a single manufacturer can depart from the established canons for a whole decade. But all thoughts about greatness and genius disappear when the iPhone 5s does not turn on, what to do in such a situation is not clear and commercial geniuses are in no hurry to explain.

Why does the iPhone break?

No device can work without failures. More precisely, not a single high-tech device can never fail during the entire period of operation:

• iPhone represents smartphone assembled from dozens of different components.
• Each part of the iPhone, in itself, is a small miracle and the result of scientific and technological progress.
• All these components are interconnected thanks to rather fragile cables that have the ability to fail at the most inopportune moment.
• The “human factor” cannot be ruled out; not every user can boast of careful handling of fashionable gadgets.

In such conditions, sooner or later the phone will stop showing “signs of life”, there will be problems with the sensor or some services. This is inevitable, you should prepare yourself for such a turn in advance. Understanding and looking for the culprits in this case is not the most reasonable solution, it is better to try to fix the situation yourself.

Do-it-yourself equipment repair

Official dealers are always advised to carry products to service centers and do not try to fix the damage yourself:

1. This is beneficial to the manufacturer, from a commercial point of view. For fixing any, even the most insignificant malfunction, you can set a good score.
2. It is convenient in terms of diagnostics. It is much easier to try to restore the device when you know for sure that no one before you dug into it and did not carry out any manipulations.
3. This is sometimes simply unacceptable to the user. The user needs the device in a couple of hours in working condition, and the service center is advised to come in 3-4 days later.
4. This can be a big hit on the budget. Even if minor, but regular breakdowns outside the warranty period will cost a pretty penny.

And it's not just about iPhones, or even phones in general. The manufacturer is really interested in the minimum number of breakdowns and malfunctions in the products sold. But even more corporations want the user to turn to them for help with all the difficulties that have arisen, and not solve them on their own.

iPhone turned off and does not turn on: what to do?

If iPhone refuses to turn on:

• Simultaneously hold down two buttons - "Home" and "Power". Sometimes this action already helps to achieve the desired effect.
• Press the buttons and hold them in this state for a little longer. Even after half a minute, do not despair, the phone may still begin to show signs of life.
• Put the device on charge, you may not have noticed how the battery fully sat down
• Set it to charge for 15 minutes, even if most recently the battery was almost full. If you only knew how lithium batteries suffer in the cold.
• A couple of times "click" the sound switch. From the point of view of theory, this should not affect the performance of the smartphone at all. But in practice, such manipulation sometimes really helps to launch an already hopelessly “extinct” device.
• Launch iTunes on your PC and connect the cable from your iPhone. On the phone while connecting, hold down "Home". This is a quick recovery option for your smartphone, just click the "Restore" button on the screen.

All these methods of checking the phone's performance will not take more than a minute. And what is even more interesting, they do not harm the device itself. Just think, no one opens the case, they don’t climb into the “inside” of the iPhone. If you can’t start the phone yourself, you can safely contact the service center.

What should I do if my iPhone is dropped and won't turn on?

Mechanical damage is a separate issue:

1. Malfunctions resulting from a fall or other physical impact are always more difficult to fix.
2. Any problem is associated with the destruction or serious damage to part of the iPhone.
3. Without seeking help from specialists, it will not work, most likely.
4. The problem may be due to damage not to the part itself, but to the cable that connects it to all other components.

If you have already "opened" your iPhone, this experience can be repeated again:

• Examine the contents carefully.
• Look for cracks, impact marks, or pressure marks.
• Inspect all loops, if necessary - correct them.
• Check .

Sometimes this is already enough for the phone to work again. If you don’t understand anything in electronics, you have never seen microcircuits and you don’t know which side to hold on to the soldering iron, it’s better to take the iPhone to the company’s service center immediately after the fall.

When it comes to relatively expensive equipment, sometimes it is cheaper to pay for someone else's work than to try something for the first time yourself.

Is it worth talking to specialists about the cause of the malfunction? If the iPhone is under warranty, you can keep silent about it or confidently prove that the phone has never fallen anywhere. Warranty cases for mechanical damage do not apply, and so - maybe lucky. Questions of conscience - a separate issue. Has the warranty expired? Then feel free to say, it will simplify the diagnosis of the device.

How to fix iPhone 5s on your own?

If your favorite phone suddenly stops turning on, you must:

1. Do not panic, pull yourself together as soon as possible.
2. Check the charging port for damage, it could be deformed or clogged with dirt.
3. Make sure that the phone is charging normally when turned off. The reason may lie in a malfunction of the iPhone battery or problems with the charger itself.
4. Press two buttons - "Home" and "Power", hold them in this position for up to a minute.
5. Play with the sound switch, then hold down the two treasured buttons again.
6. Connect the phone to the computer, having previously launched iTunes on a stationary device. It may start automatic recovery.
7. Put the iPhone on charge all night and check the performance in the morning, using all the methods described above.

Did any of the options bring you closer to solving the puzzle? Well, it's time to entrust this problem to real specialists.

Every year the number of users with "apple" products is increasing, but many beginners do not know at all if the iPhone 5s does not turn on - what to do and where to run.

Video: what to do if the iPhone 5s does not turn on

In this video, phone repairman Oleg Romanov will tell you how to revive a non-powered iPhone 5s:

Reading time: 43 min

The iPhone is not an eternal device, although it fails somewhat less frequently than Android, but still it is not uncommon, then the question becomes what to do if iPhone won't turn on. Gadgets often break, freeze and stop responding to user actions. Often the cause is mechanical or external damage to the device, but this is not always the case.

It is not worth thinking for a long time about why the iPhone 5 and any other model does not turn on if it was outwardly subject to undesirable influences:

1. Perhaps the smartphone was dropped into the water, even a short-term immersion or rain can cause a short circuit and failure to work. If the phone was really drowned, you should not immediately turn it on, on the contrary, turn it off and set it aside to dry. After 1 day, try to turn it on, so the probability of restoring its work is higher, otherwise a short circuit will occur at startup and the smartphone will be unusable;
2. Mechanical damage. iPhone, falling from a height, often takes a hit on the display, and the insides are less likely to suffer. There is no way out except to give the smartphone for repair;

1. Freezing. Batteries are afraid of a long stay in the cold, and at one moment they lose all their charge due to a chemical reaction. You need to warm it up in your hands, and then try to start it, most likely you will have to charge it.

In these cases, troubleshooting is possible only in service centers. There are a number of other reasons that lead to freezing, some of them are quite easily eliminated.

iPhone turned off and does not turn on - forced start

If the iPhone 5s turned off and does not turn on, you should use the function that forces the smartphone to start. The method is relevant for those cases when the smartphone freezes at some stage, it is possible that only a black screen is shown, but the backlight works, or after turning it off, the phone stops turning on. However, the procedure does not clear device data, so it should be used initially. For each version of the iPhone, there is the same key combination, only in the latest 7th model it is different:

1. Hold down the Home button and the Power button at the same time. The duration of the hold should be more than 10 seconds, usually up to 20 seconds. The Apple logo then appears on the screen. This option works for all versions except iPhone 7;

1. A separate, more familiar approach is used in new version, you need to hold Power and the volume control, namely the volume down button. Similarly, you need to hold until the moment when the actions on the screen begin.

The problem can be fixed by this method, but there are several additional ways.

iPhone 4, 5, 6 or 7 does not turn on - power adapter

A fairly common problem that the iPhone 5s does not turn on is a power failure situation. The user, even when connected, may not see any reaction of the smartphone, but often they are not even aware of such a banal solution to the problem as charging.

The owner of the iPhone needs to connect it to the charger, no matter what power source: 220 V network, car or computer. Do not be afraid if there is no immediate reaction. At deep discharge, for example, when the phone freezes, it takes time for the charging indicator to appear. It is worth waiting at least a few minutes, usually this time is enough. It is better to put on charge for 1 hour, and then try to turn it on, do not forget about the previous method, it is applicable now. Sometimes the process never starts, this can be provoked by various mechanical problems.

What can affect charging:

1. Check the cleanliness of the connectors, remove all kinds of foreign objects and dirt with a needle or brush;
2. Make sure that there are no kinks in the wire, there are probably interruptions;
3. Check the tightness of the contacts, the wire may not enter completely, then you will have to determine the reason for this;
4. We strongly recommend using original chargers. Lightning cables from Chinese manufacturers overheat during operation, may not have enough power to charge or practically no power;
5. Sometimes the power or charging controller fails, then you will have to use the services of a service center.

It happens that the iPhone is charging, but does not turn on, especially often it reaches the logo and freezes at this moment or turns off. In this case, you can apply recovery mode. To use it, you need to have a computer at hand. It is highly desirable that the iPhone is already connected to it beforehand, and the PC has been added to a trusted connection source, but this may not be useful.

The recovery principle is as follows:

1. Connect smartphone and computer;
2. Launch iTunes;
3. Perform a forced restart of the device - Home (for the 7th version, the volume down button) and Power;
4. A message will appear on the computer screen, allowing you to restore the iOS system, you should click on "Update".

In this case, an attempt will be made to install the operating system without erasing files. You may need to completely restore your iPhone to factory settings. Then in iTunes you will have to go to the main tab and click "Restore".

Ultimately, if the iPhone 6, iPhone 7 or any other version still does not turn on, you need to contact technical support. They will remotely provide instructions on how to fix the problem, if this does not help, then they will direct you to the service center closest to you. This will mean that the problem is of a technical nature and the user is powerless here.

If the smartphone was used carefully and charged with original chargers, then most likely it will be possible to restore its operation using the methods described. Otherwise, you will have to give the device to experts.