How to open fly. How to open the phone and remove the back cover from Xiaomi. Working with two SIM-cards

Xiaomi phones deserve good reviews. In the production of any original Xiaomi phone, reliable components are used, which guarantees high quality products. But any equipment eventually breaks down and needs repair. Therefore, it may be necessary to disassemble telephone sets. Of course, it is ideal that disassembly and subsequent repairs are carried out by specialists. This guarantees the quality of work and will allow you to have no doubts about the final result. But if you want to save on paying for their services, then you can learn how to remove the back cover on a Xiaomi Redmi phone or another model yourself.

We offer you a short guide on how to open the back cover on Xiaomi Redmi phones (including models 3 and 4), Mi Max, etc. Since almost all phones are of the same design, this guide can be used for most mobile gadgets.

Sequencing

1. First of all, we take out the SIM card tray. If you leave it in its original position inside the case, it will interfere with the removal of the cover.
2. The disassembly itself starts with the procedure for opening the latches around the perimeter of the gadget. Opening the back cover is not so easy - you need to make a lot of effort to cope with the task. But this must be done very carefully. The best and safest way to open the device is with a special spatula for working with phones. And certainly in no case should you use sharp objects that can cause scratches when working with the back cover. You need to start opening the latches from one corner of the phone, gradually moving to another.

1. When the latches give way, slowly and carefully remove the back cover on Xiaomi Redmi or Mi Max. We smoothly open the case, seeing a cable there that connects the back surface to the touchscreen. Carefully remove the ribbon cable to detach the front panel.
2. Now we have the “stuffing” of the Mi smartphone. Here we see the top panel with the installed chip, there are also cameras. Below them is the battery. Most often, the question of how to remove the back cover of Xiaomi Redmi or Mi Max appears when it is necessary to replace the cameras or the battery. This is also true if the touchscreen is damaged, but without additional complex equipment, you definitely won’t solve this problem at home.
3. Although the insides of the smartphone are open to us, we cannot yet extract them. In addition to the cameras - we can get them if we open the seal, which is easily hooked by any flat object at hand.

1. If you dismantled the phone to replace the battery or dig into the chip, you will have to work with a screwdriver. The internal elements are bolted to the cover. We unscrew them with a screwdriver, be sure to fold them in a conspicuous place so as not to lose them, and only after that we can continue the analysis. Unscrewed bolts need to be given special attention - those that are attached from above are longer than those screwed from below. Therefore, put them in different places so as not to get confused.
2. After unscrewing the bolts, open the protective panel on top, and a chip will appear in front of you. It is not recommended to make any changes to its configuration on your own.
3. I close the back cover in the same way as I open it, but, of course, the steps are performed in the reverse order. The main thing is to be careful and act carefully, and then everything will work out.

To get a more accurate idea of ​​how to properly open the Mi Max phone and other models from Xiaomi, we suggest that you familiarize yourself with the training videos.

Knowing how to remove the cover from the phone can come in handy especially when you need to change the SIM card, insert a memory card, change the battery in case of damage or purchase of a new one, etc.

The principle of removing the cover on mobile devices is approximately the same.

Remove the cover

Whatever the reason, removing the back cover is a process that every user of a mobile device needs to be able to perform:

1. To get started, pick up your phone. Now it needs to be turned down "face" to see the back of the device. The whole process will take quite a bit of time, but you need to remove the cover with two hands.
2. Turn the phone upside down so that the bottom of the mobile phone (where the microphone is located) is at the top, and the top (where the speaker is placed to the ear) is at the bottom.
3. Now, with two thumbs of the left and right hands, press on the place of the latch on the cover. Usually it is located under the camera, but if there is no camera, then at the top of the cover, or it will be indicated by relief elements. Then, together with pressure, move the cover away from you.

If the phone is new, then the cover will open with great effort, but over time this process will become easier and easier.

In addition, the covers of some mobile devices are fixed with screws, so all screws must be unscrewed to remove the cover.

For many owners of the BQ Strike smartphone, the question of how to remove the back cover of the device has become a real problem. Those who have never manually removed the back panel do not understand how to do it correctly and accurately without damaging the plastic or the display, and try to use various tools at hand, such as scissors, credit cards or knives. But you should not do this - removing the cover on the BQ 5020 Strike phone is as easy as shelling pears with your own hands. Today we will tell you how to do it right. Also watch the tutorial video at the end of the article.

Why you need to open your smartphone

The simplest and most important reason is to install a SIM card in a new, just bought gadget, as well as to install or replace an SD memory card, which is provided in almost every Strike BQs phone. The micro-SD card allows you to expand the internal memory by another 128 GB, which is undoubtedly a plus.

Many smartphone owners reboot a frozen device by pulling out and reinstalling the gadget's battery. Also, the user may need to open the cover to replace an obsolete or non-working battery with a new one. In addition, if you started an independent repair or replacement of parts in the gadget, you will not get close to the insides of the phone without removing the back panel.

So, let's look at a detailed algorithm of actions with which you can open the BQ phone and see what is inside it.

Action algorithm

First, take a look at your smartphone. On its upper end, to the right of the micro-USB connector, you will see a small notch, as if created so that the cover can be pry off. Gently insert your fingernail into this recess and slide it to the left, walking along the part where the plastic case fits snugly against the glass of the smartphone's display. If you are unable to do this, while moving along the case with your free hand, lightly squeeze it on the sides so that the plastic bends and allows you to perform actions to open the lid. Next, gently run your fingernail along the entire perimeter of the smartphone several times, thereby opening the cover of the device. The plastic panel may crackle slightly when opened, and do not worry - this is normal. Open the lid of the BQs 5020 Strike once, and in the future you will easily do this operation again and again.

How to close the lid back

It's even easier here - you don't even need your nails. Take your smartphone and put it in a plastic case. Carefully make sure that all elements, such as buttons and a camera, line up with the slots on the cover. Lightly press the phone against the case and walk around its entire perimeter in this way. You will hear characteristic clicks. Ready! Now you know how to open the cover of a BQ smartphone without damaging the case and screen. If something is not clear, watch a special training video.